Author Index: S

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Saad, S.
70x Operational Risk Management Aided By Continuous Monitoring of Barriers
Sadler, C.
20c Chloride Management in Naphtha Reforming with Continuous Catalyst Regeneration: A Method to Reduce Chloride Emissions and Consumption
107a A New Era in on-Purpose Butadiene Technology
Safdarnejad, S. M.
92b Effect of Cryogenic Carbon Capture (CCC) on Smart Power Grids
Saglam, O.
121c Arsenic Removal from Aqueous Solution Using Nano-Structured Calcium Silicate
Sahinidis, N.
149c Alamo: Automatic Learning of Algebraic Models Using Optimization
Sajib, S.
72y Lysozyme Adsorption and Desorption on the Azobenzene Self-Assembling Surfaces Studied with Molecular Dynamics Simulations
Salazar, J.
20c Chloride Management in Naphtha Reforming with Continuous Catalyst Regeneration: A Method to Reduce Chloride Emissions and Consumption
Saleman, T.
213c Methane Recovery By Dual Reflux Pressure Swing Adsorption
Salter, J.
43a Real World Challenges in Meeting Risk Criteria for Brownfield Projects
Sambath, K.
69a Evaluating Wax Yielding with a New Model
Samudra, A.
197b Optimal production scheduling with interactive decision-making
Sanati, S.
71o Facilty Siting Challenges
Sander, S.
214c Developing Intensified Separation Processes for the Industry
Sandford, N. A.
206f Should You Consider Moving to Fixed Valves?
Sandhu, S. S.
194b Characterization of Phthalocyanine-Based Materials for Lithium-Ion Batteries
Sane, A.
70ad Exploring Dependencies of Ignition Locations on Probabilistic Explosion Analysis
Sankar, J.
185c Mitigating Variable TDS Levels in Wastewater Biotreatment
Saraiva, P.
78a An Extensive Comparison Study of Batch Process Monitoring Approaches
Sarica, C.
69b A Self-Sufficient Wax Deposition Model for Horizontal Gas-Oil Slug Flow
Saud, Y.
70ai Safety Culture and Leadership- Independent of Language
70j Cultura De Liderazgo y Seguridad – Independientemente Del Idioma
139b A Modern Well HAZOP Approach
Saura, M. B.
71c Developing Process Engineers into Effective HAZOP/LOPA Facilitators
Saygi-Arslan,
36a Brayton Refrigeration Cycle for Small Scale LNG Plants
Sayyar-Rodsari, B.
197b Optimal production scheduling with interactive decision-making
Scanlon, L.
206c NGL Unit Debottlenecked with UOP Enhanced Capacity MD™ Trays and High Flux™ Tubing for Significant Production Expansion and Energy Optimization
Scheller, D. M.
135a Introduction to High Performance Organizations
155c Q&A Panel of Session Speakers
Schietekat, C. M.
207e Furnace Firing Control: The Key to Extending Your Runlength
Schlanger, M. O.
View Chemical Engineering: Is This the Golden Age?
Schlieter, T.
146d Design, Installation, Operation and Maintenance of Transfer Line Exchanger Feedwater Systems
Schmidt, J.
159c How to Size a Rupture Disk Vent Line for Two-Phase Gas/Liquid Flow Based on Current Engineering Practices
Schmude, D. J.
45e Prevent Damage in FCC Main Column Slurry Pumparound Zones with Proper Design and Operation
Scholtz, C.
71c Developing Process Engineers into Effective HAZOP/LOPA Facilitators
102a Effectively Addressing New PSM/RMP Damage Mechanism Review Requirements with an Integrated PHA (iPHA)
Scholtz, E.
67b Smart Grid: Industry Meets the Smart Grid – Integrating Process Automation and Energy Management in Industrial Facilities
Schon, S.
206b Ripple® Trays for Fouling Applications
Schröder, D. V.
31b Prediction of the Mass Flow of Heavy Gas Released from Standard Gas Bottles
Schug, S.
216e Investigation of Fluid Dynamic Parameters in Packed Distillation Columns Using X-Ray Computed Tomography
Schuler, B.
85a Polymer Solution Preheating to Achieve Steam Usage Reduction in Polymer Isolation By Precipitation Jets
Schultes, M.
4d FRI Test Results and Industrial Applications for New High Capacity Raschig Mini Fixed Valve
144b How Sensitive Is Your Treating Plant to Operating Changes – Part 2
Schultz, J.
108c Changes in the PSM/RMP Regulatory Framework – California and National
Schwab, S.
148a Guidelines for Dynamic Modeling of Column Startup
Schwarz, H. V.
68a Recent Process Safety Developments at BASF Ludwigshafen, the World's Biggest Chemical Site
Scott, S.
25a Creating a Culture of Chronic Unease
154a Are We Really Learning from Incidents? a Discussion of Best Practices and Common Mistakes
Seabaugh, M.
213b Superior Composite Oxide Catalysts for Combustion of Volatile Organic Compounds
Seasholtz, M. B.
103a Manufacturing Analytics – Conquering “Big Data” in Chemical Manufacturing
Seibert, F.
144d Packing Characterization for Post Combustion Capture: Model Development
Seiler, L.
169c Dow Laboratory Safety Academy Promotes Safety Mindset in Future Chemical Workforce
Self, F.
159b Models for Multi-Phase & Single-Phase Flow in Pressure Relieving System Using Bernoulli Integration
Senetar, J.
107a A New Era in on-Purpose Butadiene Technology
Sengupta, D.
12a Development of the SMART - Rcn Modules for Integrating Sustainability Education in Engineering Curriculum
Seo, Y.
114d Formation of Hydrate Plug in Water-Decane-Natural Gas Systems with Varying Watercut and Inhibitor Concentrations
Shackelford, K.
26c Gas Monetization and Risk Monetization
Shackleford, A.
75a Creating Maximizing Value with FCC Feeds from Opportunity Crudes
Shafiei, M.
202a Expansion of Operating Range of Dividing Wall Columns
Shah, N.
80a Integrated operation of solvent-based carbon capture processes and coal-fired power plants: rigorous modelling, optimization and operability analysis
Shahani, G.
138a Hydroprime® Modular Plants Provide Low Cost, Reliable Hydrogen
Shahraz, A.
16c An Optimal Cost-Effective Approach to Sensor Siting for Industrial Facilities
Shaik, K.
99e Novel Methods to Separate Azeotropic Butanol-Water Mixtures without the Need for Extractive Distillation or Pervaporative Membrane Separation
Shaikh, I.
70h Numerical Modeling of Pool Fire inside an Offshore Methanol Storage Tank
Shakur, M.
20c Chloride Management in Naphtha Reforming with Continuous Catalyst Regeneration: A Method to Reduce Chloride Emissions and Consumption
Shankar, S.
74l Design for Mechanical Integrity in Thermal Mixing Points
Shao, H.
74m Stimuli-Responsive Rheoreversible Fracturing Fluids for Unconventional Oil and Gas Extraction
Sharda, B.
197c Mixed-integer Optimization Formulations for Site-wide Turnaround Planning
Shariat, H.
17a Upstream Process Engineering for Offshore and Onshore Facilities
Sharifzadeh, M.
80a Integrated operation of solvent-based carbon capture processes and coal-fired power plants: rigorous modelling, optimization and operability analysis
Sharma, K. R.
72c On Parabolic and Hyperbolic Diffusion Effects during Hybridization Kinetics with Convection in Microfluidic Chamber
73b Synthesis and Applications of Nanocoatings
74a On Diffusion Coefficients, Relaxation Times of Oligonucleotides
Sharma, R.
17a Upstream Process Engineering for Offshore and Onshore Facilities
Sharpe, E.
176b Case Study: Laser-Based Gas Detection Technology and Dispersion Modeling Used to Eliminate False Alarms and Improve Safety Performance on Terra Nova FPSO
Shaw, S.
26c Gas Monetization and Risk Monetization
Shawabkeh, R.
24b Electroreduction of Carbon Dioxide to Hydrocarbons Using Copper Nanoparticles' Electrode
Shecterle, D.
177b Innovative Value Capture from Shale: Integrated Naphtha Processing in a Modular Condensate Refinery
Sheilan, M.
172a Fundamentals of Amine Systems Design
View Fundamentals of Amine Systems Operations
Shelton, G. A.
71q Lessons Learned during Air Tightness Testing of Shelter-in-Place Buildings at Chemical Facilities
Shende, S.
82c Cost Effective Control of Red Oil in Caustic Tower Systems
Sheng, M.
21a Highly Conductive Catalyst Support Structure for Use in Large Diameter Highly Exothermic Gas-to-Liquid Reactors
Sheng, M.
71bb Application of HAZOP Study On Some Butyl-Octyl Alcohol Plants
Shethna, H.
76a Detailed Asset Optimization for Saudi Aramco Refineries
99e Novel Methods to Separate Azeotropic Butanol-Water Mixtures without the Need for Extractive Distillation or Pervaporative Membrane Separation
Shi, H.
71g Experiment Study on Acoustic Emission Detection of Internal Leakage of Gas Ball Valves
Shi, X.
121a Influence of Ice Cavity Geometry Changes on Burning Behavior of Large Scale Crude Oil Fires
Shiau, L. D.
73h Enantioseparation of Phenylethanol By Stripping Crystallization
Shibutani, T.
60c Risk Assessment for a Gas and Liquid Hydrogen Fueling Station
Shiflett, M. B.
73o The Tribology of Bicycle Chain Lubricants (Electronic Poster Presentation)
Shin, D. P.
143b Building of Safety Knowledge Base for Automatic Synthesis and Validation of the SIS Design for Toxic Gas Facilities
143c Optimal Selection and Placement of Iot-Based Sensors for Early Detection of Chemical Accidents
Shin, W. S.
73l Effect of Porous Media on the CO2 Hydrate Formation
Shing, K.
72y Lysozyme Adsorption and Desorption on the Azobenzene Self-Assembling Surfaces Studied with Molecular Dynamics Simulations
Shiveler, G.
144b How Sensitive Is Your Treating Plant to Operating Changes – Part 2
179d Steps for Troubleshooting Amine Sweetening Plants
Shrawage, A.
121b CFD Analysis of Supercritical Water Reactor for Flow Back and Produced Water Treatment
Si Yuan, Q.
73m Investigate of Polysilicon Chemical Vapor Deposition Reaction Kinetics Mechanism in Trichlorosiane-Hydrogen System
Sibblies, J.
129a Tier 3 Vehicle Emissions and Fuel Standards Compliance
Sielegar, D.
89c Applications of Pseudo-Dynamic Heat Transfer Model in an LNG Plant
Silva, E.
70x Operational Risk Management Aided By Continuous Monitoring of Barriers
Silva, H.
145c Minimizing Fouling in Ethylene Primary Fractionators
Sim, L.
17b Adaption of Blosom (Blowout and Spill Occurrence Model) to High Performance Computing
Singh, S.
64a Net Present Value in Gas Turbine Generator Selection for LNG Liquefaction Plants-a Case Study
Singh, S.
192b Emergency Relief System Design for Reactive System Using Direct Scale-up Method
Sisco, C.
74f PVT Modeling of Crude Oils: Development of Advanced Characterization Methods and Accurate Prediction of the Onset of Asphaltene Precipitation
Sloley, A. W.
45b Complex Atmospheric Preflash Configurations
45g Condensate Splitting - What Are the Options?
216b Crude Unit Heat Integration - Feed Composition Effects and Current Best Practices
Smith, A. B.
197b Optimal production scheduling with interactive decision-making
Smith, C.
56a Direct Conversion of Mixed Oxygenates to Isobutene over ZnxZryOz Mixed Oxides
Smith, D.
136b Calorimetric Study of the Exothermic Decomposition of Dimethyl Sulfoxide
Smith, D. L.
36c Adsorbent Solutions - the Important Role of Adsorbents in LNG Plants
Smith, D. J.
58a Changes Between API STD 521 6th Ed and 5th Ed Cataloged
58b Changes Between API STD 520 Part II 6th Ed and 5th Ed Cataloged
70af How Having Updated Heat & Material Balances Commits to Process Safety
71v Heat Exchanger Design Parameters Effect on Low Pressure Side Maximum Pressures during a Tube Failure
Smith, J.
106a Aspen Plus Simulation of Biomass Gasification in a Downdraft Gasifier
Smith, J. D.
53b A Production Possibility Frontier of a Sustainable Coal, Wind, and SMALL Modular Reactor Hybrid Energy System
72z Improving Process Sustainability and Profitability for a Large U.S. Gray Iron Foundry (Electronic Poster Presentation)
118c Improving Process Sustainability for a Large U.S. Gray Iron Foundry
Smith, M.
150c Formulating a Porous, Solid Catalyst Development Program Using Dimensional Analysis
Smith, M. W.
77c Mechanism-Free Chemical Engineering Kinetics: Part 2
101a Dimensional Analysis of Liquid Flow through Packed Columns
Smith, R.
59a Retrofit of Existing Heat-Integrated Crude Oil Distillation Systems for Energy Recovery
83b Operational Optimisation of Industrial Cooling Water Systems
109b Design Optimisation of Multi-Stream Plate Fin Heat Exchangers
164b Integrated Modelling and Optimization of Refinery Hydrogen Networks
Smith, S.
20b Emissions Testing of Sonic Velocity Flares Validates High Destruction Efficiency
Smith, S.
98c Pyrolysis Gas Sampling
Sobczyk, M.
206c NGL Unit Debottlenecked with UOP Enhanced Capacity MD™ Trays and High Flux™ Tubing for Significant Production Expansion and Energy Optimization
Sofranko, J. A.
207c Reducing Emissions from Olefin Production Via Chemical Looping Odh Technology
211a Process Development of Manganese-Based Oxygen Carriers for Oxidative Coupling of Methane in a Pressurized Chemical Looping System
Sohn, Y. H.
114d Formation of Hydrate Plug in Water-Decane-Natural Gas Systems with Varying Watercut and Inhibitor Concentrations
Sojoudi, H.
114a Reducing the Adhesion of Hydrates Using Durable Hydrate-Phobic CVD Polymers
Soleimani, N.
72v On-Line Optimal Control of Molecular Weight Distribution in Batch and Semi-Batch Free Radical Polymerization Processes
Song, C.
140c A New Methanol Synthesis Process Using Self-Heat Recuperation-Reaction Section
160b An Innovative Process Design for Ammonia Synthesis Based on Self-Heat Recuperation Technology
Song, F.
83b Operational Optimisation of Industrial Cooling Water Systems
Soong, Y.
104c The Interactions of CO2/Brine/Rock Under CO2 Sequestration Conditions
Sousa, A. L. B.
70f Quantifying Human Error Probabilities through a Bayesian Network Using Expert Opinion and an Auditing Tool: An Application to the Tokai-Mura Accident
Spitzenberger, C.
122c Active Versus Passive Fire Protection - Getting the Balance Right
Srinivasan, V.
17d Detailed Flow Modeling of Erosion in Subsea Equipment
St. Pierre, J.
81b Pyrolysis of Concentrated Pulping Liquors to Generate Highly Deoxygenated Organics for Bio-Based Fuels and Chemicals Production
Stack, R.
46c Rerate Overview; Aerodynamic, Mechanical, Efficiency Considerations, Trends
Stahl, M.
70ad Exploring Dependencies of Ignition Locations on Probabilistic Explosion Analysis
71h Why Do We Still Have Blast Walls on Offshore Platforms?
Stankovich, R.
16a Eli Lilly PSM Implementation Case Study
Staszak, A.
70ad Exploring Dependencies of Ignition Locations on Probabilistic Explosion Analysis
71h Why Do We Still Have Blast Walls on Offshore Platforms?
102c The Lifecycle of a Process Safety Recommendation
Stauffer, T.
71ar Integrating Alarm Management into Your PHA and LOPA Processes
Stern, M. C.
79c Unconfined Deflagration Testing for the Assessment of Combustible Dust Flash Fire Hazards
Stevick, K.
68b Next Generation Root Cause Investigation and Analysis - Elimination of Repetitive Incidents through Strengthening Management Systems
133a Dow Learnings & Actions from the Deepwater Horizon Accident
Stewart, E.
144b How Sensitive Is Your Treating Plant to Operating Changes – Part 2
Stewart, L.
71am Using Unrealistically Optimistic Failure Data: Is It Ethical?
Stier, R.
47a The New World Order in the Olefins Industry - As a Result of Developments in Advantaged Feedstocks and Technology
Stoessel, F.
71l Predicting Thermal Behavior of Chemicals from Molecular Structure
Stough, J.
71t Unlock the Value of Operational Data
Strand, S.
180a Dynamic Real Time Optimization of Oil Refining Processes
Streblow, S.
40b A Comprehensive Guide to Accurately Size Pressure and Vacuum Relief Devices for Atmospheric and Low Pressure Storage Tanks
70e Introducing a Dynamic Calculation Method for Pressure Relief Load and Orifice Sizing
87a Overlooked Factors in Pressure Relief Systems Design
192c Engineering Safe Pressure Relief for Existing Flare Systems
Strong, R.
84c Use of Ionic Modeling and Process Sample Analyses to Verify Causes of Corrosion and Fouling in Different Refinery Cases
Stuber, J.
78b Online Soft Sensor Adaptation of Latent Projection Growing Structure Multiple Model Systems
Study, K.
126c Good till the Last Drop – Acceptable Valve Leakage Rates
133a Dow Learnings & Actions from the Deepwater Horizon Accident
Sturnfield, J.
210a Using modeling to control a chemical plant flare
210b Advanced model development from production data using multiple objectives
Subramani, H. J.
94a Gas Evolution Rates in Crude Oil for Upstream Applications: A Literature Review
Subramanian, K.
178d Assessment Methods to Prevent Brittle Fracture Failures in Pressure Vessels & Piping Components
Sulaiman, S. Z.
71ac Experimental Study on Gas Explosion in an Obstructed Confined Pipe
Sullivan, B. K.
146a Ethylene Cracking Heater Troubleshooting Tutorial
Summers, D. R.
144b How Sensitive Is Your Treating Plant to Operating Changes – Part 2
206d Channel Baffles on Trays
Summers, D. A. E.
65b Demonstrating Separation and Independence of Automated Systems
70ah Evaluation of Uncertainty in Safety Integrity Level (SIL) Calculations
167a Dependent, Independent and Pseudo-Independent Protection Layers in Risk Analysis
Summers, P.
153b Blast Resistant Design and Retrofit of Buildings at Petrochemical Facilities
Sun, G.
55b Sustainable Design of Shale Gas-to-Liquid Process Via Energy and Mass Integration
Sun, J.
214b The Technical Reconstruction of the Double Effect Distillation for Methanol Process
Sun, W.
115c Application and Optimization of Quantitative RBI on Equipment of Station Yard
Super, J. D.
30a Industrial Perspective on Licensing and Credentialing
Suresh, P.
210b Advanced model development from production data using multiple objectives
Suter, P.
157a Case Study on SMALL-Scale LNG Facility Expansion
Suvorova, I.
56d Non-Conventional Methods of Obtaining Combustible Liquid Fuels
Suzuki, K.
7a Development and Research Activities of Advanced System Safety Laboratory for Safety Education/Culture
Suzuki, K.
49c Catalyst Bed Reactor for Online Removal of Coke from Catalyst in Reforming of Coke Oven Gas
Swanson, J.
97e Steam Control in Elevated Steam Assisted Flares
Swett, L.
187a Process Safety Opportunities for the Refining and Petrochemical Industries
Szczepanski, R.
74n Mitigating Downhole Flow Assurance Issues Using Specialist Modeling Software
125b Evaluating Effect of Compositional Gradients on Asphaltene Stability in Reservoirs with CPA and PC-SAFT
Szust, J.
216d Fluidized Packed Beds (FPB) – an Alternative for Process Gas Treatment in “Dirty” Systems?
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z