Author Index: M

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Ma, H.
72w DNA Hybridization on Silica Surface for Gene Chip Design Studied with Molecular Dynamics Simulations
72x Structures, Dynamics, and Water Permeation Free Energy Across Bilayers of Lipid a and Its Analog Studied with Molecular Dynamics Simulation
Ma, L.
55b Sustainable Design of Shale Gas-to-Liquid Process Via Energy and Mass Integration
Ma, L.
73k Topology Optimisation for Optimal Shape Selection of Solar Parabolic Trough Receiver (Electronic Poster Presentation(Electronic Poster Presentation (Electronic Poster Presentation)
Maass, S.
74w Optimizing Crude Oil Separations – a Study of Turbulence and Chemical Composition Influence on the Drop Size Distribution of Crude Oil in Maritime Conditions (Electronic Poster Presentation)
Macatangay, P.
107a A New Era in on-Purpose Butadiene Technology
MacGregor, J.
103c Learning from Historical Data: A Key to Process Improvement and Optimization
149a Using Production and Image Data for Real-Time Improvement of Process Operations
Machado, M. V.
167b The Societal Risk of Process Industry Based on Integrated Assessment of Quantitative Risk Analysis (QRA) and Risk-Based Inspection (RBI) Methodologies
Macharia, M.
212c Advances in Developing New MPC and Advanced Control Solutions
Mackowiak, J.
216d Fluidized Packed Beds (FPB) – an Alternative for Process Gas Treatment in “Dirty” Systems?
Mackowiak, J.
144f Are Stacked Packings Structured Packings? Fluid Dynamics and Their Separation Efficiency for Gas-Liquid Systems
216d Fluidized Packed Beds (FPB) – an Alternative for Process Gas Treatment in “Dirty” Systems?
Madenoor Ramapriya, G.
172b Synthesis of Efficient Multicomponent Separation Processes
214d Synthesis of New Dividing Wall Columns for Thermally Coupled Distillation
Mafukidze, N.
72i Synthesis and Optimization of Integrated Water and Membrane Network Systems with Multiple Electrodialysis Regenerators
Maggi, C.
46b Process Consideration Related to Compression Equipment in Linear Low Density Polyethylene (LDPE) Plants
Mahalec, V.
180b Hybrid Models of Distillation Towers for Plant Optimization
195b Ejector Refrigeration Cycle for Natural Gas Plant Waste Heat Recovery in Hot Climates
Maher, S. T.
71c Developing Process Engineers into Effective HAZOP/LOPA Facilitators
102a Effectively Addressing New PSM/RMP Damage Mechanism Review Requirements with an Integrated PHA (iPHA)
108c Changes in the PSM/RMP Regulatory Framework – California and National
View Assimilating Design Formulation and Design Review into a HAZOP - Lessons Learned and Additional Tips
Mahmud, M. A.
17c Mechanism of Sloshing Minimization in Offshore Separator By CFD Simulation
94c A Novel Simple Approach to Describe Sloshing in FPSO Vessel Using CFD Simulation
Maia, C.
176c Escape Routes Selection for Offshore Units Based on Quantitative Risk Assessment Results
Mainardi, D. S.
73i A Quantum Theoretical Development of Platinum-Ruthenium-Tin Anodic Catalysts for Enhanced Direct Ethanol Fuel Cell Performance
Makkawi, Y.
106b Modelling of a Solar-Thermal Reactor for Biomass Fast Pyrolysis
132c Computational Modelling of Dimethyl Ether (DME) Steam Reforming in a Dual Fluidized Bed System
Man, Y. S.
76a Detailed Asset Optimization for Saudi Aramco Refineries
Mancha, N.
41b Smart Grid: You Are Not Alone – the Role of Curtailment Service Providers
Mandayo, G. G.
213a The Transport Phenomena within the Intasense Indoor Air Quality Monitor Design
Maness, M. J.
58c Evolution of Relief Sizing at an Operating Company
Manimegalai Sridhar, U.
166a Leapfrogging Optimization Applications to Model Predictive Control and Nonlinear Process Modeling
Mankin, K.
82c Cost Effective Control of Red Oil in Caustic Tower Systems
Mannan, D. S. M.
39c Mitigation Effect of High Expansion Foam on LNG Vapor Hazard
66c Experimental Study on Propane Jet Fire Hazards: Thermal Radiation
71ay An Optimization Formulation for Risk Reduction of the Layout of Offshore Platforms
79b Combustion and Explosion Related Properties of Carbon Nanofibers
137c Experimental Study and CFD Simulation on Bund Overtopping in Case of a Catastrophic Failure of Tanks Containing Water/Liquid Nitrogen/LNG
157b Quantification of Turbulence in Cryogenic Liquid Pool Using High Speed Flow Visualization
169a Mary Kay O’Connor Process Safety Center: A Catalyst for Enhanced Process Safety Competency and Knowledge
Manuel, L.
51a Propane Dehydrogenation Design for US Gulf Coast
Mao, Y.
72k Effect of the Grid Generation in Numerical Simulation of Spray Granulation Tower
Marcancola, F.
176a CFD Analysis of Gaseous Leaks with 80% CO2 on Offshore Facilities
Marei, N. N.
190b Effect of Nanosize on Adsorptive and Catalytic Properties of NiO Nanoparticles Towards Heavy Hydrocarbons: Kinetics, Thermodynamics and Mechanistic Insights
Marr, K.
71ad On the Use of Laminar Burning Velocities in Process Safety
Marsegan, C.
39a CFD Modeling of Large Scale LNG Pool Fires
Marszal, E.
50b Risk Analysis of Wired Versus Wireless Transmission of Process Measurements
Martin, A.
42b Making Sustainability Tangible: Resilience, Behavior Change, and Risk
martin Juez, J.
70n How Close Is My Operation to a Major Accident?
Martin, M.
194a Measurement of Internal Temperature of a Li-Ion Cell at Large Discharge Rates
Martin, P. F.
30c Engineering Credentialling
Mashuga, C.
79b Combustion and Explosion Related Properties of Carbon Nanofibers
Mason, C.
40a Influence of Overpressure in Pressure Vacuum Safety Valves on Emission Reduction and Explosion Risk Minimization of Atmospheric Storage Tanks
Masters, D.
51a Propane Dehydrogenation Design for US Gulf Coast
Masuku, C. M.
74u Application of Artificial Neural Networks to Modelling Vapour–Liquid Equilibrium in the Fischer–Tropsch Reaction
Mathew, N. T.
125a Probing Asphaltene Deposition Using Microfluidic Devices
Matsuoka, K.
117b Development of Dynamic Process Simulator on LNG Vessel Gas Management System
Matten, C.
206g Design of Tray Columns for Emergency Blow-Down Situations
May, E. F.
74i Flowloop Measurements of Hydrate Blockage Risk in 
Under-Inhibited Gas-Dominant Systems
74j A New Quantitative Approach to Assess the Risk of Hydrate Blockage Formation in Subsea Flowlines
94d Attributes and Behaviours of Crude Oils That Naturally Inhibit Hydrate Plug Formation
114c A New Application of Differential Scanning Calorimetry to Identify the Adsorption of Surfactants on Gas Hydrate Interfaces
114d Formation of Hydrate Plug in Water-Decane-Natural Gas Systems with Varying Watercut and Inhibitor Concentrations
125c Cohesive Force Measurement Between Precipitated Asphaltene Solids
213c Methane Recovery By Dual Reflux Pressure Swing Adsorption
Mc Cavit, J.
120b 1987 Celanese Pampa Butane Vapor Cloud Explosion
McBride, E.
103b Business Insight from Big Data in the Chemical Industry
McCarley, K. C.
4a Bibliography of Dr. Elzear Lemieux
28b Distillation Tray Fundamentals
28c Distillation Packing Fundamentals
144e High Pressure Distillation with Structured Packing - Friend or Foe
McClung, A.
204d Applying Statistical Methodology and Multivariate Analysis on Big Data to Improve the Data Quality and Process Operation
McCullough, D. D. W.
47b Petrochemical Technology Trends: Looking Beyond the Short Term Fix
McDaniels, J.
84b Crude Unit Desalting Operations: Techniques for Improving Fouling and Corrosion Control
McIlroy, C.
181a Development of Adsorption-Based Process for Heavy Hydrocarbon Removal from Lean Natural Gas
McIntyre, D.
104c The Interactions of CO2/Brine/Rock Under CO2 Sequestration Conditions
McKechnie, W.
73o The Tribology of Bicycle Chain Lubricants (Electronic Poster Presentation)
McKinley, G. H.
114a Reducing the Adhesion of Hydrates Using Durable Hydrate-Phobic CVD Polymers
McLendon, R.
104c The Interactions of CO2/Brine/Rock Under CO2 Sequestration Conditions
McMillan, G.
212a Control Strategies and Parameters to Improve Reactor Performance
McNeely, M.
105a Dynamics of Direct Spring Operated Prv's with Inlet Piping in Gas Service
Medley, V.
47a The New World Order in the Olefins Industry - As a Result of Developments in Advantaged Feedstocks and Technology
Medrano, M. A.
153c Thermal Radiation Analysis from Large Pool Fires in an Existing Atmospheric Storage TANK Farm to Estimate the Maximum FIRE Water Demand
Medrano, M.
147a Evaluation of Technology Development for Direct Replacement Biofuels Using Thermochemical Processes
Meher-Homji, C. B.
64a Net Present Value in Gas Turbine Generator Selection for LNG Liquefaction Plants-a Case Study
Melhem, G.
60a Risk Ranking Criteria for Catastrophic Vessel Failures Due to Fire Exposure. Vessel Wall Dynamics & Consequence Analysis
71n Screening Tool for Runaway Reaction Characterization. Optimizing Efforts for Emergency Relief Systems Design
Meliefste, K.
126c Good till the Last Drop – Acceptable Valve Leakage Rates
Mendenhall, J. D.
210a Using modeling to control a chemical plant flare
Meng, Z.
100b Simulation of Gas-Solid Flow in a Modified Internally Circulating Fluidized Bed By Using a Multi-Scale CFD Approach
Mengel, M.
204d Applying Statistical Methodology and Multivariate Analysis on Big Data to Improve the Data Quality and Process Operation
Mentzer, R.
157b Quantification of Turbulence in Cryogenic Liquid Pool Using High Speed Flow Visualization
Mercedes, C.
101a Dimensional Analysis of Liquid Flow through Packed Columns
Merenov, A.
202a Expansion of Operating Range of Dividing Wall Columns
Meyer, P.
27c Opportunities for Co-Processing Biomass Derived Intermediates in a Petroleum Refinery
Meyer, T.
71l Predicting Thermal Behavior of Chemicals from Molecular Structure
Mezzano, V.
196a Regulators Versus Control Valves: What's the Best Fit?
Michelsen, W.
73o The Tribology of Bicycle Chain Lubricants (Electronic Poster Presentation)
Mike, M.
71ao Best Practice MOC and Pssr 2014
Miletic, I.
149a Using Production and Image Data for Real-Time Improvement of Process Operations
Miller, B.
206c NGL Unit Debottlenecked with UOP Enhanced Capacity MD™ Trays and High Flux™ Tubing for Significant Production Expansion and Energy Optimization
Miller, D.
31a Hydrogen Jet Vapor Cloud Explosion: Test Data and Comparison with Predictions
Miller, S.
194a Measurement of Internal Temperature of a Li-Ion Cell at Large Discharge Rates
Min, K. J.
186a Process Design of Acid Gas Removal Units Considering Liquid Mal-Distribution of Columns for LNG-FPSO Applications
Mindock, M.
3a Large Steam Turbine Response Due to Sudden Coupling Failure
Misra, S.
166b Adaptive Design of Rotated Inputs for Model Order Determination in Subspace Identification
Mitchum, S.
163c Surviving an OSHA PSM National Emphasis Program Audit
Mixon, W.
97f Identifying Fugitive Flare Flow Using Radioisotope Tracers
Miyake, A.
60c Risk Assessment for a Gas and Liquid Hydrogen Fueling Station
Mize, J.
58c Evolution of Relief Sizing at an Operating Company
108a How Does "Deviation" Become "Normal"?
View Do We Really Need More Process Safety Leaders?
Mizuta, Y.
7b Development of Quantitative Hazard Analysis Method for Inherently Safer Chemical Processes
Mohamed, N. M.
4e Troubleshooting and Solving a Gas Treater Downcomer Unsealing Problem
Mohammad, S.
94a Gas Evolution Rates in Crude Oil for Upstream Applications: A Literature Review
Mohammed, F. M.
48c Importance of Process and Flaring Data and Its Analysis for the Management of Abnormal Situations: An Ethylene Process Case Study
Mohammed, K.
99e Novel Methods to Separate Azeotropic Butanol-Water Mixtures without the Need for Extractive Distillation or Pervaporative Membrane Separation
Mohan, G.
43c Prevention or Mitigation of Major Accident Hazards through Early Identification of Safety Critical Elements
Mohan, L. S.
17d Detailed Flow Modeling of Erosion in Subsea Equipment
37a CFD Modeling of Mixed Flow Regimes and Regime Transitions in Gas-Liquid Systems
111c CFD Modeling of Fouling in Crude Oil Refinery Heat Exchangers
Mohiuddin, K.
52b Big Data
Moideenkutty, K.
71ap Application of Risk Analysis in Pilot Plants and Research Labs
Molina, A.
123b Data Standardization Using an Extensible Mark-up Language (XML) to Estimate Kinetic Parameters for Refinery Processes. Case Study: Hydrocracking
Moll, J.
206c NGL Unit Debottlenecked with UOP Enhanced Capacity MD™ Trays and High Flux™ Tubing for Significant Production Expansion and Energy Optimization
Moncalvo, D.
40c Overfilling Protection for Weak Tanks
Moncalvo, D. I. D.
40a Influence of Overpressure in Pressure Vacuum Safety Valves on Emission Reduction and Explosion Risk Minimization of Atmospheric Storage Tanks
Mondal, P.
198c Assessment of Defluoridation of Drinking Water Using Novel Adsorbent Nano-Crystalline Magnesium Amended Hydroxyapatite (M-HAP)
Monroe, C. W.
208a Transport in Constrained Polymer-Electrolyte Membranes
Moon, H.
171a Application of Marine Standard Vs Offshore Standard for FLNG Design and Construction
Moore, A.
73o The Tribology of Bicycle Chain Lubricants (Electronic Poster Presentation)
Moore, D. A.
8c Essential Practices for Developing, Strengthening and Implementing Process Safety Culture
Moore, W.
185a Recent Trends in the Removal of Sulfate through Precipitation
Moran, J.
90b Biochar Production and Application on Treatment of Flowback Water from Hydraulic Fracturing
Morgado, C.
71ab Application of Risk Prioritization Matrix of Nonconformities in the Offshore Industry
Morgan, B.
71k Process Safety in Gas/Oil Transport Implementing Best-in-Class Procedure Management Practices - a Case Study
Morita, M.
131a Development of Highly Selective and Stable DTP Catalyst for Propylene Production from Methanol
Morris, J.
16b Autonomous Remote Gas Detection Using Optical Imaging Technology
Morrison, D.
25b Guidelines for Creating a Process Safety Culture Assessment Tool
66b The Hazard We Know: Comparing Transportation Risk of LPG and LNG
205a Fire from the Cascading Failure of an Oxygen Supply System
Morrissy, S. A.
125c Cohesive Force Measurement Between Precipitated Asphaltene Solids
Mosca, G.
45f Maximize Performance & Run Lenght of a CDU Main Fractionator with Advanced Mass Transfer Components
Moser, M.
20c Chloride Management in Naphtha Reforming with Continuous Catalyst Regeneration: A Method to Reduce Chloride Emissions and Consumption
Mossop, R.
92a Integrated Grid Modeling System: A Distributed Solar Power Case Study
Mostofi, R.
123a Computational Fluid Dynamics (CFD) for Process and Equipment Design and Development
Motomiya, A.
131b On-Purpose Propylene Production from Light Hydrocarbons with MFI-Zeolite/Metal-Oxide Composites
Mshelia, A.
122c Active Versus Passive Fire Protection - Getting the Balance Right
Mu, Z.
153b Blast Resistant Design and Retrofit of Buildings at Petrochemical Facilities
Mukai, C.
95b BACT in Air Pollution Control
Mukherjee, A.
74v Role of Surface Properties in Predicting Viscosity of Concentrated Coal-Water Slurries
Mumm, J.
117c LNG Refrigerant Compressor Startup Torque Evaluation Using Dynamic Simulation
Mumm, J.
140a Ensuring Operability and Controllability of a Natural Gas Plant Using Dynamic Simulation
Muñoz Giraldo, F.
71e Optimal Sectioning of Hydrocarbon Transport Pipeline By Volume Minimization and Environmental Vulnerability Assessment
Murphey, J.
2b Use of CFD in Evaluating Pyrolysis Furnace Design
Murphy, B.
142b Practical Considerations in Debottlenecking of Sour Water Stripper Units for Revamps
Murphy, M.
189a Chemical Incompatibility Matrices
Murty, M. S. N.
150b Wall-to-Bed Mass Transfer in a Fluidized Bed Electrochemical Reactor in the Presence of Angled Disc Promoter
Muscroft, T.
71k Process Safety in Gas/Oil Transport Implementing Best-in-Class Procedure Management Practices - a Case Study
Mustafa, M.
125b Evaluating Effect of Compositional Gradients on Asphaltene Stability in Reservoirs with CPA and PC-SAFT
Musto, D.
116c Collecting, Organizing, and Presenting Data from Small Scale Systems
Myers, T. J.
71ad On the Use of Laminar Burning Velocities in Process Safety
79c Unconfined Deflagration Testing for the Assessment of Combustible Dust Flash Fire Hazards
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z