Author Index: J

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Jacobs, G.
159b Models for Multi-Phase & Single-Phase Flow in Pressure Relieving System Using Bernoulli Integration
Jacobsen, A.
107a A New Era in on-Purpose Butadiene Technology
Jacoby, J.
3a Large Steam Turbine Response Due to Sudden Coupling Failure
3c Refrigeration Compressor Recycle Quench Control
Jain, A.
194a Measurement of Internal Temperature of a Li-Ion Cell at Large Discharge Rates
Jain, M.
117c LNG Refrigerant Compressor Startup Torque Evaluation Using Dynamic Simulation
James, M. D.
110b Consequence Modeling of Dynamic Source Terms
Janjua, R.
170b Refinery Wastewater Treatment
Jap, C.
82b Advanced Aromatics Recovery Technology with AED-BTX Process
Jariwala, A.
186c Latest Innovation in Floating LNG Pretreatment Technology: Compact and Energy Efficient
Jatale, A.
111c CFD Modeling of Fouling in Crude Oil Refinery Heat Exchangers
Jawas, J.
70ae Process Safety Near-Miss Management System in Takreer Ruwais Refinery: An Effective Tool for Applying Prevention Strategies
Jeong, J. H.
73n An Efficient Anode for Lithium Ion Battery: Inverse Silicon Opal Prepared By Magnesium Thermal Reduction of SiO2
Ji, S. Y.
125a Probing Asphaltene Deposition Using Microfluidic Devices
Jiang, S.
72m Optimisation of Refinery Diesel Blending
Jilani, M.
24c Aqueous Ethylaminoethanol Blended Solvents: Promising Candidates for CO2 Capture
33b Solar Hydrogen Production Via Thermochemical Metal Oxide – Metal Sulfate Water Splitting Cycle
53c Thermochemical Conversion of H2O and CO2 into Solar Fuels Via Metal Oxide Based Redox Reactions
62b Computational Thermodynamic Analysis of Solar Fuel Production Via Metal Oxide Based H2O and CO2 Splitting Thermochemical Cycles
104a CO2 Capture Using Aqueous Ethylaminoethanol: Study of Oxidative Degradation
138b A Novel Two-Step Metal Oxide – Metal Sulfate Water Splitting Cycle for the Production of Solar Hydrogen
211c Solar Thermochemical Reforming of Natural Gas Via Metal Oxide Based Redox Reactions
Jin, H.
167a Dependent, Independent and Pseudo-Independent Protection Layers in Risk Analysis
Jobson, M.
59a Retrofit of Existing Heat-Integrated Crude Oil Distillation Systems for Energy Recovery
Johns, M. L.
74i Flowloop Measurements of Hydrate Blockage Risk in 
Under-Inhibited Gas-Dominant Systems
74j A New Quantitative Approach to Assess the Risk of Hydrate Blockage Formation in Subsea Flowlines
94d Attributes and Behaviours of Crude Oils That Naturally Inhibit Hydrate Plug Formation
114c A New Application of Differential Scanning Calorimetry to Identify the Adsorption of Surfactants on Gas Hydrate Interfaces
125c Cohesive Force Measurement Between Precipitated Asphaltene Solids
Johnson, A.
205d U.S. Chemical Safety Board's Final Investigation Report on the Chevron Richmond Refinery Pipe Rupture and Fire
Johnson, C.
122c Active Versus Passive Fire Protection - Getting the Balance Right
Johnson, E.
204d Applying Statistical Methodology and Multivariate Analysis on Big Data to Improve the Data Quality and Process Operation
Johnson, J. F.
45c Coking Mechanism in Refinery Fractionator Wash Beds
Johnson, J.
70ad Exploring Dependencies of Ignition Locations on Probabilistic Explosion Analysis
Johnson, M. R.
170c CFD Modeling of Air Emissions from Controlled Flare Tests
Johnston, D.
97b Reliability Based Operations and Maintenance in a Cracking Plant
Johnstone, J.
163c Surviving an OSHA PSM National Emphasis Program Audit
Jones, J. A.
View A Spreadsheet Application for Evaluating Two-Phase Emergency Venting Transients Utilizing an Interface to a Thermodynamic Property Package
Jones, S. B.
27c Opportunities for Co-Processing Biomass Derived Intermediates in a Petroleum Refinery
Jones, T.
70c Best Practice in Application of CAA CAP 437 Guidance for Offshore Helicopter Landing Areas
Jones, W.
92a Integrated Grid Modeling System: A Distributed Solar Power Case Study
Judzis, A. Jr.
151a FCC Gasoline Desulfurization and Tier 3 Solutions
Jung, E. S.
137b Methodology for Design of Knock out Drum Considering Internal Explosion in Flare System
Jung, G.
74l Design for Mechanical Integrity in Thermal Mixing Points
Jurtz, N.
195a Predicting Performance and Efficiency of Semi-Permeable Membranes with Simulation
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z