Author Index: T

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Tabernero, A.
40b An Attempt to Scale-up a Biodiesel Production Plant from a Microalgae Heterotrophic Culture - Economic Feasibility and Future Industrial Potential
Tacchini, E.
31c De-Bottleneck a PP Splitter with 4 Pass VGPlus Trays
Tadepalli, S.
87e Cycloaddition of Isoamylene and α-Methylstyrene in a Microreactor Using Filtrol-24 Catalyst
Taheri, H.
143a A Breakthrough Reactor Technology to Improve Process Efficiency, Reduce Energy Consumption, and Lower Greenhouse Gas Emissions
Taira, T.
115b Development of Nozzle Plate for Granulation Process
Takase, C.
26e Distillation Columns Risk Assessment: When the Regular HAZOP Evaluation Is Not Enough
Takashima, K.
95a Hydrogen Production From Residual Heavy Oil
95g Production of Hydrogen From Sugar by a Liquid Phase Electrical Discharge
Talapatra, S.
92c Fischer Tropsch Synthesis On CNT Based Catalysts
Tam, J. M.
97a The Kinetically-Controlled Formation of Biodegradable Gold Nanoclusters
Tam, J. O.
97a The Kinetically-Controlled Formation of Biodegradable Gold Nanoclusters
Tamakloe, E.
112a Development of a Model for the Prediction of Fouling in Heat Exchangers Processing Crude Oil
Tamhankar, S.
113g Integrated Hydrogen Production, Purification and Compression Demonstration Project
Tampy, G.
87e Cycloaddition of Isoamylene and α-Methylstyrene in a Microreactor Using Filtrol-24 Catalyst
Tan, H.
16e Molecular Simulation of Ion Transport in the Quaternized Chitosan/Poly(vinyl alcohol) Blend Membrane
Tang, M. J.
52c Update of “Guidelines to Vapor Cloud Explosion, Pressure Vessel Burst, BLEVE and Flash Fire Hazards”
Tao, C.
66g Effect of Isomorphic Substitution of Zirconium On Mesoporous Silica as Support for Cobalt Fischer-Tropsch Synthesis Catalysts
Tatoulian, M.
95f Fluidized Bed Plasmas Reactor for Catalyst Preparation. Application for SCR NOx by Hydrocarbons in Mobile Sources
52b Atmospheric Storage Tank Explosion Modeling
63b New Natural Gas Storage and Transportation Capabilities Utilizing Rapid Methane Hydrate Formation Techniques
Taylor, D.
160a Designing for an LNG Loading Arm Failure
Tedeschi, F.
26e Distillation Columns Risk Assessment: When the Regular HAZOP Evaluation Is Not Enough
39a Cogeneration Options in LNG Liquefaction
91c The Third C in CCS - Compression
141a Automation of Batch and Procedural Control through Standards Based Design
Tepke, B.
95h Forming Small Organic Molecules From CO2 Using a Dielectric Barrier Discharge (DBD) Plasma
Ternes, M. E.
35a EPA Mandatory GHG Reporting Rule, 40 C.F.R. Part 98, Subpart Y – Petroleum Refineries, Subpart C – Stationary Fuel Combustors and Subpart MM – Suppliers of Petroleum Products
43a Workshop: CO2e Emission Reporting in Ethylene Plants - Part I
43b Workshop: CO2e Emission Reporting in Ethylene Plants - Part II
62a Greenhouse Gas Legislation, Regulation and Litigation
90a Complying with the EPA Mandatory GHG Reporting Rule, 40 C.F.R. Part 98
Tew, R.
107c Elements of Human Factors Missing From Process Safety
27b Thermal Stability of Chemicals Based On Kinetics and Vessel Parameters
53f Semi-Automated Work Process for Capturing Relief Valve Proof Test Data to Support Failure Rate Analysis
View Understanding Data Requirements
Thomas, M. L.
111d SUNFUEL: Conversion of Waste Biomass to Biofuels – Initial Spectroscopic and Small-Scale Continuous Flow Reactor Investigations in Supercritical Water
Thomas, S.
60b Novel Polymer Membrane Process for Pre-Combustion CO2 Capture From Coal-Fired Syngas
155f “Compression System Check Valve Failure Hazards”
Thompson, J. R.
108e Challenges in Hosting An NEP Inspection
15c Constrained Model Identification - Use Knowledge of the Process to Get Better Models From Less Data
Tibaduiza, A. D. P.
View Experimental Determination of Phase Envelope Data for Synthetic Natural Gas Mixtures
Tiwari, R. K.
116f Methodology for SMART Chemical Process Development: Synergy of Statistics, Simulation and Science (S3)
Todd, T. A.
32a Recent Advances in the U.S. Fuel Cycle R&D Program
Tora, E.
144h Optimal Design and Operation of Solar-Based Cooling, Heating, and Power Generation Systems for Industrial Processes
Torres, R.
100d Failure Mode, Effect and Criticality Analysis (FMECA) for Planning Maintenance Using Risk and Reliability Criteria
Toulhoat, H.
139c Fixed Bed Residue Hydroprocessing: Modeling Hydrotreating Performances and Catalyst Deactivation
Tourigny, G.
61e Catalytic Gasification of Pinewood Sawdust and Peat in a Pilot-Scale Air-Blown Fluidized Bed Gasifier
Toutain, J.
118a Scale-Down of a Condensation Polymerization Process in a Millifluidic Device
103c Learning the Lessons From Buncefield
Trepanier, M.
66e Microemulsion Synthesis of Co Nanoparticles Supported On CNT: Effects of Nanoparticles Size On Reducibility, Activity and Selectivity in FTS
Trinh, T. D.
114c Elastic Layered Metal-Organic Framework Absorbents for Carbon Dioxide Capture
Trombly, D. M.
View Dispersion of Polymer-Grafted Nanoparticles in Polymer Thin Films
Tromp, S.
55b HIDiC as A Retrofit Technology
Trotz, M.
56e A Model for the Photocatalytic Oxidation of Cell Membranes During Water Disinfection
67f Reconciling Mass and Energy Balances in An Ethylene Complex
Trujillo-Vazquez, A.
139b Molecular Reconstruction of Heavy Petroleum Residue Fractions
View Correlating Tracer Particle Diffusivity with Excess Entropy
View Composition and Concentration Anomalies for Structure and Dynamics of Gaussian-Core Mixtures
84e A Dimensionless Model for Predicting the Mass Transfer Area of Structured Packing
Tübke, J.
113a Hydrogen Production by Reforming of Logistic Diesel Fuel in Supercritical Water
Tula, A.
159b Simulating Industrial Ethylene Flares
Tungal, R.
111a Catalytic Subcritical Hydropyrolysis of Waste Biomass and Selective Enrichment of Hydrocarbon Fuels
Turner, P.
15e APC Sustainability and Performance Management – A New Paradigm with Integrated Adaptive Modeling Technology
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z