2010 Spring National Meeting: Author Index R

Rabie, A.

58b A Process Integration Approach to the Optimal Scheduling of Unsteady State Material Recovery Networks

Rajab, A.

View Understanding the Other Side of Process Safety

Rajesh, R.

135f Catalyst Technology for the Removal of Acetylenes, NOx and Oxygen From Olefin Streams

Ralbovsky, IV, P. J.

82c New Benchtop Instrument for Process Safety and Development

Ramadan, O.

7e Combustion Testing of Hydrogen-Enriched Natural Gas (HENG)

Ramaswamy, R.

73c Journey towards PSM Excellence

Ramirez, D. D.

13a Adsorption and Desorption Dynamics of Hazardous Air Pollutants and Water Vapor On Engineered Nanomaterials

Ramirez, J. C.

76e The Hazards of Thermal Expansion

Ramkumar, S.

60c Evaluation of the Technical and Economic Performance of the Calcium Looping Process for CO₂ and H₂s Capture From Coal-Derived Synthesis Gas

Ramotowski, M.

41h Clean Combustion of Liquid Biofuels in Gas Turbines for Renewable Power Generation

Rangwala, A. S.

157a Utilization of Carbon Dioxide Towards Control/Suppression of Underground Coal Fires

Rao, T. V. M.

83b Effects of Feedstock and Catalyst and Oil Contact Time On ZSM-5 Cracking Chemistry in FCC Process

122d Effective Gasoline Production Strategies for the Catalytic Cracking of a Rapeseed Vegetable Oil Under Realistic FCC Conditions

Rasmussen, K. H.

37c Durable Model Predictive Control

Ratway, J.

115d Example of Design and Installation of Reactor Emergency Relief Device, Knock-out Tank and Vent Line System for a Vapor/Gas Hybrid System

Ray, S.

86e Comparative Study of the Photocatalytic Performance of An Immobilized TiO₂ Nanocatalyst and TiO₂ Nanoparticles in Slurries

Raybold, T. M.

148e Oxygen Enhanced Reforming: A Low Capital Cost Retrofit Solution to Debottleneck H2 Plant Production Capacity

Read, C.

7a Goals and Achievements of the US National Program On Hydrogen Storage Applied R&D

Reboucas, M.

135g Troubleshooting Silicon Contamination On Hydrotreatment Catalysts - Sources, Impacts and Mitigation

Reed, M.

156c Influence On Ambient Air Flow Due to Helical Straking On a Chemical Plant Stack

Reed, Jr., S.

136e Ultra Low NOx Burner Performance in An Ethylene Cracking Furnace

Remesat, D. R.

112d Innovative and Reliable Designs for Upgrading/Extraction

121a Improving Refinery Asset Utilization -through Low Cost Tower Internal Modifications

133e Dr. K. Chuang - From Heavy Water to the Superfrac(r) Tray

Remias, J. E.

60d Development of Freeze Granulated Oxygen Carriers for Chemical Looping Combustion of Solid Fuels

117b Vapor-Liquid Equilibrium (VLE) Study of CO2 with MEA and Ammonia Solvents

117d Enhancing Post-Combustion CO2 Capture in Power Plant – A Catalytic Approach

Repasky, J. M.

33a ITM Syngas: Ceramic Membrane Technology for Lower Cost Conversion of Natural Gas

Reppenhagen, R.

96c How to Optimize Your Control System - Reduce Variability and Discover Problems with Instrumentation and Valves

Resetarits, M.

55e Gamma Scanning of FRI Reboiler Vapor Return Lines

109a FRI Experimental Unit - Evaluation and Upgrade

133f Professor Karl Chuang Contributions to Separation Science

Reverdy, F. R.

11d Aim for Autothermal Operation in Diesel Production

Reyna, H.

45g Combined Effect of Catalyst Size and Metal-Carbon Interactions On the Growth of Single Wall Carbon Nanotubes

Reyniers, M.

88e From Biomass to Ethylene: Steam Cracking of Bio-Synfined Naphtha

Ribeiro, M. C.

66f Characterizing the Influence of Mn and K Promoters On the Carburization Rates and Performance Parameters of Fe-Based FT Catalysts by TPR-EXAFS/XANES and Catalytic Testing

Ribero, B.

50b Steam Cracker Optimisation through On-Line TOPNIR™ Analysis and Rigorous Kinetic Models

Richard, J.

52b Atmospheric Storage Tank Explosion Modeling

Richmond, P. C.

50d Support Practices for Advanced Process Control Part 2 - RTO

50e Support Practices for Advanced Process Control Part 1 - MVC

Richter, S.

115d Example of Design and Installation of Reactor Emergency Relief Device, Knock-out Tank and Vent Line System for a Vapor/Gas Hybrid System

Ricotta, J.

133b Liquid Phase Resistance to Mass Transfer in Structured Packing

Ridder, B. J.

86d Optimization of Ball-Milled Ni-InVO4-TiO2 Photocatalyst for the Degradation of Methyl Orange

Riley, P. C.

136e Ultra Low NOx Burner Performance in An Ethylene Cracking Furnace

Risseeuw, I. J.

138d Design of Ultra-Low NOx Critical Furnaces

Rita, D. J.

26e Distillation Columns Risk Assessment: When the Regular HAZOP Evaluation Is Not Enough

Rivas, R. C.

132d Citrus Waste Biorefinery: Pretreatment and Enzymatic Hydrolysis Processes

Roberts, C. B.

33b Diesel Length Aldehydes From Iron-Based Fischer Tropsch Synthesis

Robertson, G. M.

67b A Multi-Level Simulation Approach for the Crude Oil Loading/Unloading Scheduling Problem

Roby, R. J.

41h Clean Combustion of Liquid Biofuels in Gas Turbines for Renewable Power Generation

Rochelle, G. T.

84e A Dimensionless Model for Predicting the Mass Transfer Area of Structured Packing

117c Stripper Configurations for CO2 Capture by Aqueous Amines

Rochelle, S. G.

20b Fire Study of Melting Fiberglass Using FLUENT CFD Software

Rodgers, S. A.

20a A Fuel Ratio Method for Estimating the MESG of Nitrogen-Diluted and Oxygen-Enriched Fuels, Including the Brandes-Redecker Method to Estimate the MESG of Mixed Fuels

51b Practical Issues with Marginally Explosible Dusts - Evaluating the Real Hazard

Rodriguez Rivero, C.

40c Development of New Technologies for Biomedical Applications

Rogers, S.

67e Enterprise Inventory Management in Volatile Markets

Rolfe, S. A.

113h Perovskite Sorbents for Removal of Sulfur, Arsenic and Phosphorus

Romagnoli, J. A.

59b An Integrated Framework for Enterprise Management—A Synergistic Approach towards Sustainable Biorefineries

67b A Multi-Level Simulation Approach for the Crude Oil Loading/Unloading Scheduling Problem

84c Online Dynamic Parameter Estimation, Data Reconciliation and Transition Planning for a Packed Distillation Column within a Model-Centric Process Support System

Romeo, E. M.

113e PRODUCTION of HYDROGEN and CARBON Nanotubes by CATALYTIC Decomposition of Methane USING Co-Mg-Al Catalysts

Rosi, N. L.

142e Metal-Adeninate Porous Materials for Selective CO2 Capture

Rowsell, L.

36c On-Line Studies of Pd Based Sorbents for the Removal of Gaseous Metal Contaminants: Capture and Regeneration

Royo, C. J.

113e PRODUCTION of HYDROGEN and CARBON Nanotubes by CATALYTIC Decomposition of Methane USING Co-Mg-Al Catalysts

Rubel, A. M.

60d Development of Freeze Granulated Oxygen Carriers for Chemical Looping Combustion of Solid Fuels

Rudolph, E. S. J.

63a Gas Hydrates in Porous Media

Rumbold, K.

138b Effects of Nitrogen Ions Concentration On South African Fresh Water High CO2 Tolerant Microalgae Growth

Ruoff, R.

16c Graphene Based Electrodes for Ultracapacitors

97f Graphene-Based Materials and Their Applications

Rupp, E. C.

36a Real Time Detection of Gaseous Metal Contaminants in Coal Flue and Fuel Gas

36c On-Line Studies of Pd Based Sorbents for the Removal of Gaseous Metal Contaminants: Capture and Regeneration

36d Qualitative Prediction of Sorbent Performance for Mercury Capture by Lab-Scale Tests

157b Possible Use for CO2 Captured from Coal Derived Flue Gas: Reforming of Methane in Electric Discharge Plasma

157c Survey of Potential Uses for Carbon Dioxide Captured From Coal-Burning Power Plants

Rush, S.

69f Power Recovery in LNG Regasification Plants

Ryan, T.

34a Magnetic Bearings in Turboexpander Applications

Author Index: R