Author Index: N

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
278f Efficient Bayesian Inference for First-Principle Simulation Via Adversarial Networks and Low-Complexity Surrogate Models
Nabavizadeh, S. A.
159d Active Colloidal Crystallites
Nabil, M.
295b Stokes Flow Past a Highly Deformed Sphere
Nacev, B. A.
3fa Biochemical and Cellular Libraries Reveal Cancer-Associated Histone Mutations That Perturb Nucleosome Structure and Inhibit Cell Differentiation
Nachtergaele, P.
339e Systematic Multivariate Analysis (sMVA) Strategy for Improved Process Understanding of Industrial Biorefinery Processes with Applications in Fatty Acid Production
759e Mechanistic Modelling of a Fatty Acid Distillation Plant: Iterative Approach for Component Lumping and Industrial Validation
Nachtigal, A.
263g Thermal Treatment of Granular Materials in a Rotary Drum Equipped with Baffles
Naclerio, A.
321g Visualizing Oxidation Mechanisms in Few-Layered Black Phosphorus Via in Situ Transmission Electron Microscopy
Nadeau, G.
254d Metabolic Regulation and Engineering in Red Yeast, a Basidiomycete of Biotechnological Interest (Industry Candidate)
Nadeau, M. L.
364b Exploring the Catalytic Combustion Mechanism of Hydroxylammonium Nitrate Using Rmg-Cat
432e Particle Mixing Measures in a Vertical Bladed Mixer Using X-Ray Computed Tomography (CT)
Nagao, D.
183f Design of Photocatalytic Particle Assemblies Applicable to a Continuous Water Purification Process
282d Design of Lipid-Nanoparticle Assemblies for High-Sensitive Lipid Membrane Analysis
Nagao, M.
387d Thermodynamic Modeling and in Situ Characterization to Understand Solid-State Synthesis Pathways
Nagaoka, Y.
3t Nobel Materials Created from Nanocrystals through Self-Assembly and High-Pressure Chemistry
Nagarajan, A. V.
233a Elucidating Doping Effects on the Catalytic Activity of Ligand Protected Gold Nanoclusters for the Electrochemical Reduction of CO2
Nagarajan, R.
650i Gelatin Microcapsules for Multifunctional Fabrics
Nagawkar, B.
630f An Index to Characterize Particle Mixing at Different Scales
131h Characterizing Graphene Oxide Suspensions with Rheological Testing and Modeling, Neutron Scattering, and Electrochemical Performance
163n Salt-Templated Transition Metal and Metal Oxide Aerogels
265e Combustion Products from Thermal Treatment of Polymers Containing per- and Poly-Fluoroalkyl Substances
487c Bottom-up All Aqueous Assembly Approach for the Synthesis of Lightweight 3D Carbon Nanocomposite Aerogels for Electrochemical Energy Storage and Conversion Applications
675g Low-Cost 3D Ni-Based Electrocatalysts for HER and Oer for Fuel Cells
View Ni-Foam Layered Double Hydroxide Electrocatalysts for Fuel Cells
View Conductive Poly(vinyl alcohol)/Multi-Walled Carbon Nanotube Nanocomposite Fiber Electrodes for Lightweight and Energy Dense Supercapacitor Applications
View Synthesis of Graphene/Platinum Nanoparticle Composite Aerogels By Self-Assembly
View Conductive Graphene/Noble Metal Nanoparticle/Silk-PMMA Composite Thin Film Biomaterials
Nagy, Z. K.
121b Novel Integration of Continuous Crystallization Platforms for Control of Crystal Size Distribution and Polymorphic Form
235e Pharmapy: A Process Synthesis Framework for Hybrid Pharmaceutical Manufacturing Systems
322d Condition Monitoring of Pharmaceutical Processes Under a Probabilistic Framework
377c Integrated Use of Digital Twin-Based Framework for the Development of a Lomustine Manufacturing Pathway
407c Real-Time Monitoring of Powder Mass Flowrates for MPC/PID Control of a Continuous Direct Compaction Tablet Manufacturing Process
478f Digital Design of an Intensified Filtration-Drying Unit for Continuous Manufacturing
545f Morphological Population Balance Modeling of a Pharmaceutical Compound for Size and Shape Prediction for in-Silico Experimental Design
576b Experimental Investigation of Wet-Mill Integrated Crystallization with Temperature Cycles for Size and Aspect Ratio Control of a Commercial Pharmaceutical Ingredient
642e Process Design and Development of a Small Scale Hybrid Manufacturing System for the Cancer Drug Lomustine
646c Utilization of Quality-By-Control for Rapid Process Design of Agrochemical Crystallization
716b A NMPC Strategy Applied to a Continuous Direct Compaction Tablet Manufacturing.
744g Continuous Direct Compaction Tablet Manufacturing Characterization Using Data-Reconciliation and Residence Time Distribution Functions
Nahid, A.
512j Model Predictive Control Performance Analysis to Driving Force Based Reactive Distillation Columns
Naik, A. R.
94a 'Transitioning from Graduate School to Your Future' panel discussion
Naik, A.
327a Kinetics of Friedel Crafts Acylation of 2-Methylfuran with Octanoic Anhydride and Al-MCM-41.
513m Kinetics of Acylation of 2-Methylfuran with Fatty Acid Anhydride and AlMCM41.
Nair, G.
151d Human Pluripotent Stem Cell Expansion and Endoderm Differentiation in an Automated Stirred-Suspension Bioreactor
Nair, N. U.
534e Directed Evolution of Phenylalanine Ammonia-Lyase (PAL), a Key Enzyme for the Treatment of Phenylketonuria (PKU)
Nair, S.
180e Continuous Separation of Multicomponent Aromatic/Aliphatic Mixtures By Simulated Moving Bed Adsorption: Combined Modeling and Experimental Approach
400b Tunable and Robust Graphene Oxide Membranes for Fractionation and Recycle of Kraft Black Liquor Components
570e Separation and Purification of 2,5-Dimethylfuran: Process Design and Comparative TEA and Sustainability Evaluation of Advanced Adsorption and Conventional Distillation
595f A Generalized High-Viscosity Gel Conversion Method for Highly Selective Small-Pore and Medium-Pore Zeolitic Hollow Fiber Membranes
666f Graphene Oxide Nanofiltration Membranes for Desalination at Realistic Conditions
820t Project 7.5 - Robust Membranes for Black Liquor Concentration
Najem, A.
686a Analysis and Optimization of Cyclopentadiene Dimerization Using Reactive-Distillation Modeling
Najimu, M.
View Modelling of Droplet Combustion in Flame Synthesis of Nanomaterials
Najm, H.
86d Accelerated Saddle Point Refinement with Sella
488b Including Anharmonicity in Adsorbate Partition Functions and How It Affects Theoretical Parameter Estimates for Desorption of Methanol from a Cu(111) Surface
Najman, J.
101a Deterministic Global Dynamic Optimization of Hammerstein-Wiener Models
218d Design with Equilibrium Processes Embedded: Global Optimization with Guaranteed Phase Stability
Najmi, S.
50c Investigating the Role of Solid Acid Sites in Surface Reactions of a Model Sugar
111h Understanding Solvent and Pretreatment Effects on the Surface Chemistry of Small Oxygenates on Molybdenum Trioxide
Nakagawa, S.
517h Autonomous Monitoring of Wellbore Integrity Applying Time Reverse Nonlinear Elastic Wave Spectroscopy (TR NEWS) and Fiber Optic Sensing and Communication
Nakagawa, T.
623g Study on CO Conversion from CO2 By Chemical Looping Process
Nakajima, M.
162a Topical Application of Choline-Based Ionic Liquid (CAGE) to the Treatment of Oral Infectious Disease
Nakajima, N.
162a Topical Application of Choline-Based Ionic Liquid (CAGE) to the Treatment of Oral Infectious Disease
280h Constraint-Based Regularization for Nonlinear Interior Point Solvers
Nakamura, H.
131e Enhancement of Battery Performance of All-Solid-State Lithium-Ion Battery with Structural Control of Dry Coated Particls
263b CFD-Dpm Simulations of Spray Drying Process: Drying Kinetics of Individual Droplets in Water Droplet Group
315f Control of Gate Adsorption Characteristics of Flexible Metal-Organic Framework Particles By Crystal Defect
350q Coarse-Grained DEM Simulation of a High Shear Mixer
350r Numerical Simulation of Packing Structure and Compression Process of Cohesive Bimodal Particles.
Nakanishi, H.
366f Design Method for Injectable Manufacturing Processes Considering Continuous and Batch Compounding
Nakazawa, R.
315f Control of Gate Adsorption Characteristics of Flexible Metal-Organic Framework Particles By Crystal Defect
Nakouzi, E.
183c Interplay between Short- and Long-Range Forces in Self-Assembly of Silver Nanoparticles
Nallamothu, S. K.
380c Optimization of Dissolution Time in a Stirred Tank: A Case Study Using the Population Balance Method
Nam, J.
740d Investigation of Coke Formation Mechanism on Platinum Surface during Ethane Dehydrogenation
Nam, J.
450b Invited Talk: Entropy Source Analysis for Ferrites in Two-Step Thermochemical Splitting of Water and Carbon Dioxide
166n Machine-Learning Driven Potential Energy Surface for Nanoparticles Alloy System
Nambiar, A. M. K.
438a Robotic Platform for Execution, Analysis, and Optimization of Multistep Reactions in Continuous Flow
Namgung, K.
341g Energy-Efficient Production of Butyl, Amyl, and Hexyl Acetates in a Single Reactive Distillation
Namigata, H.
183f Design of Photocatalytic Particle Assemblies Applicable to a Continuous Water Purification Process
Nan, Y.
308a Roles of Alcohol As a Cosurfactant at Brine-Oil Interface Under a Typical Reservoir Condition
333h Slip Length of Methane Flow Under Shale Reservoir Conditions: Effect of Pore Size and Pressure
Nance, E.
49a Organotypic Brain Slices As a Platform for Measuring Response to Biological Stimuli
118h Multiple Particle Tracking Detects Changes in Brain Extracellular Matrix Structure
153h Creating an Inclusive Chemical Engineering Community for Womxn through Allyship and Advocacy
291b Surfactant Effects on Nanotherapeutic Fate within the Brain
291g Enzymatic Protection and Biocompatibility Screening of Enzyme-Loaded Polymeric Nanoparticles for Neurotherapeutic Applications.
355c Engineering Nanomedicine to Overcome Brain Biological Barriers for Improved Treatment of Pediatric Brain Diseases
359g Graduate Student Award Session: Surfactant Effects on Nanotherapeutic Fate within the Brain
403e Ffiber: Framework for Fluorescent Neuroimaging Based Experimental Routines
650a Exploring Structure and Dynamics of PLGA-Based Materials in Solvents Relevant to Nanoparticle Formulation
Nande, I.
249d Modelling Amorphous Solid Dispersions: The Role of Supersaturation, Nucleation and Crystal Growth
160j Development of a Plant-Made Therapeutic to Treat Spaceflight Osteopenia
166aj Monolithic Chromatographic Purification of Plant Viral Nanoparticles
577i Computational Modeling of Therapeutic Glycoproteins
591d Multipurpose Automated Optimization Platform for Reactions Involving Solids
Nandy, A.
106a Molecular Design Blueprints: Catalysts and Principles from New Simulation and Machine Learning Tools
285e A Database with Automated Quantum Chemistry Calculations and Machine Learning for Functional Transition Metal Complex Discovery
346m Navigating Combinatorial Challenges in High-Throughput Transition Metal Complex Discovery
427c Breaking the Rules: Open Shell Systems Break Strong Scaling Relations and Allow Discovery of Materials with Improved Multiple Property Targeting
477b Leveraging Experimental Transition Metal Complex Information to Improve Generalizability of Machine Learning Models
346w Generating Potential Energy Landscapes for Membrane Proteins Using High-Throughput Simulations
433a High-Throughput Screening of Small-Molecule Libraries in Search of New Antibiotics
723e Understanding Molecular Machinery of Life: A Study of Histone Protein Dynamics
471b Optimal Design of an Integrated Thermal Energy Conversion System for Sustainable Energy and Desalinated Water Production
Narang, K.
566c A Porous Copper Metal Organic Framework with Highly Nucleophilic Amine Links for CO2 Gas Separation from Biogas
Naranjo, E.
167d Functional Properties and Physicochemical Characterization of Native Starch from Andean Crops for the Production of Sustainable Bioplastics
Narasimhan, B.
350y Enabling Nano-Insecticides: Biodegradable Nanoparticle Biodistribution in Aedes Aegypti Mosquitoes
Narasimhan, M.
237b Stiffness Induces Metabolic Dysfunction in Primary Hepatocytes
Narasingam, A.
172h Data-Driven Stabilization of Nonlinear Dynamical Systems: A Koopman Operator Approach
299c Deep Learning Based Koopman System Identification of Nonlinear Controlled Systems
434d An Offset-Free Control Framework for Koopman Lyapunov-Based Model Predictive Control
Narayan, R.
60c Can Bioplastics Alleviate Plastic Waste Issues?
Narayanan, E.
88c Molecular Engineering of a Colorimetric Nanogel Sensor for Clinical Radiotherapy and Trauma Monitoring
Narayanan, P.
521b Self-Supported Branched Poly(ethyleneimine) Scaffolds for CO2 Capture
Narayanan, R.
250c Nonlinear Instability of Resonance in Thin Films with Patterned Walls: Theory and Experiments
418c Surface Tension Measurement Using Resonance of Levitated Molten Droplets
474f Pattern Formation in Electrostatic Instability: Weakly Nonlinear Analysis
Narayanan, S.
166a Radiation-Controlled Drug Release Formulation with Improved Therapeutic Index for Treatment of Head and Neck Cancer
Narita, K.
View Simulation of Battery Cycling of Different Electrode Architectures Using Porous Electrode Theory
Narita, K.
585c Analysis of Green Ammonia Production Responding to Fluctuating Renewable Energy By Using Dynamic Simulation
262d Prediction of Storage Modulus of Starch Suspensions during Granule Swelling
478b Data-Driven Process Development and Scale-up of an Acetal Protection Reaction and Crystallization
262d Prediction of Storage Modulus of Starch Suspensions during Granule Swelling
296c Outside-in Hemodialysis: A Study of Toxin Clearance
346bh Exact Sampling of Stochastic Process from Brownian Bridge
381c Deformation and Burst of a Liquid Droplet with Viscous Surface Moduli in a Linear Flow Field
381f Vesicle Dynamics in Large Amplitude Oscillatory Extension, Simulations and Microfluidic Experiments
483c Theoretical Studies of Cross-Stream Migration Non-Spherical Particles in an Arbitrary Quadratic Flow of a General Second-Order Fluid
Narváez Rincón, P. C.
162g Starch Derivatives Having Anionic Groups As Viscosity Modifying Agents for Cement Pastes
633c Decision Methodology for the Conceptual Design of a Sustainable Energy Supply System for the Leticia Campus of Universidad Nacional De Colombia.
Nascimento, C. A. O.
157d Biological Conversion of Methane into Polyhydroxybutyrate (PHB)
157e Extracellular Carotenoid Production from Microalgae Under Increased CO2 Concentrations
362e A Metamodeling Approach to Support Design Optimization in the Sugarcane Industry.
Nascimento, S.
121f Liquid-Liquid Extractions in API Manufacturing Processes: Is Continuous the Way to Go?
426g Coupling Reaction Kinetics, Calorimetry and Mixing Studies for Successful Scale-up of Exothermic Reactions
Nascu, I.
353e A Combined Computational-Fluid-Dynamics Model and Advanced Control Strategies for Direct Perfusion Bioreactor Systems
Naseem, N.
160e Nutritional Safety of the Oxidized Compounds of Ultra-Processed Foods in the Western Diet
Naserifar, S.
86f Explicit Solvent Hybrid QM Simulations Embedded in the Quantum-Based Polarizable Reactive Force Field
Nasser, M.
701g Pilot Scale Osmotic Concentration Process for Reducing Injected Wastewater Volumes in Gas Field Operations
Nataraj, A.
646f Detection of Morphology and Modality Changes during Crystallization Using in Situ Chord Length Monitoring and Inference System Model.
Natesan, P.
277d Photocatalytic Degradation of Pesticide with TiO2 Anchored on g-C3N4/Exfoliated g-C3N4 Under Visible Light Irradiation
Nath, A.
533d Palmitate Induced Desmoplakin Loss and Enhanced Migration of Breast Cancer Cell Mediated By the IRE1α-XBP1-ZEB1 Pathway
Nathan, G. J.
511g Opportunities to Enhance Sustainability of Copper Production with the Hys Cycle
559a Keynote: Opportunities and challenges for CST in high temperature industrial processes
Nathan, S.
691c Using Atomic Layer Deposition to Understand Support Effects on Co2c Formation in ZnO-Modified Co Catalysts during Syngas Reaction
Naumann, A.
197d Perfluoroalkyl Substances (PFASs) Partition into Bacterial Cell Membranes and Cause Unexpected Lipid Ordering
Nautiyal, A.
639c Rapid Detection of Fentanyl Levels Via Electrochemical Approach for Point-of-Care Diagnostics
Navarathna, P.
75g Artificial Intelligence to Improve Blood Glucose Control for People with Type 1 Diabetes
Navarrete, D.
506e All for One and One for All Research: Moringa Oleifera Lam. in Food, Health and Environmental Applications
Nayar, G.
8d Using a High Throughput Cell Culture Workflow for Process Development and Process Characterization for Therapeutic Proteins
3hz Polymer Science in Developing Fibrous materials for Advanced Technical Applications
607i Interfacial Phenomena in Rheology of Cellulose/Ionic Liquid Solutions
Nazari, R.
605d Public Health Perspectives Associated with Waste Plastics
664c Overview and Assessment of Waste Plastics in the Ocean Environment
Nazemi, M.
3aa Electro-Synthesis of Value-Added Chemicals Via Designing New Catalysts, Systems, and Processes
188d Electrochemical Production of Ammonia Via Designing New Catalysts and Processes
562g Electrochemical Reduction of N2 to NH3 Using Porous Bimetallic Pd-Ag Nanoparticles in Liquid and Gas Phase Systems
143c Alterations in the Membrane Lipid Composition of Live Cells Affects the Ability of Cells to Internalize Nanomaterials
349d Lipid Chemical Structure Regulates the Interactions of Nanoparticles with Lipid Membranes
Nazemzadeh, N.
522e A Hybrid Modelling Framework for on-Line Data-Driven Modelling of Particle Processes
85b Sodium Tungstate-Promoted Perovskite Oxides As Effective Redox Catalysts for Redox Oxidative Cracking of Naphtha
326a Low-Temperature Chemical Looping Oxidative Dehydrogenation of Ethane for Modular Ethane to Liquids
350a Chemical Looping – Oxidative Dehydrogenation of Ethane Using Surface Modified Mixed Oxide Particles: Kinetic Studies and Process Demonstration
696b Promoted Perovskites for Low-Temperature Chemical Looping Reforming
706h Kinetic Studies on Chemical Looping – Oxidative Dehydrogenation of Ethane Using Surface Modified Mixed Oxides
820e Project 5.6 - Modular Conversion Of Stranded Ethane To Liquid Fuels
Neal, M.
56g A Physiologically-Based Pharmacokinetic Model of Endogenous Clotting in Obstetric Patients
Neale, D.
10g Biomimetic Fibronectin As Scalable Three-Dimensional Networks Enable Precise Extracellular Matrix Engineering
Neaton, J. B.
285c High-Throughput Discovery of Metal-Organic Frameworks for Cooperative CO2 Adsorption
391d Validation of the First Transition Velocities in Various Bubble Columns Based on Comparison of Several Sophisticated Identification Methods
518o New Approach for Gas Holdup Prediction in Bubble Columns Operated Under Imperfect Homogeneous Conditions
Nedoma, A.
28e Crystallization Dynamics of Thermally Quenched Linear Block Copolymers Comprising the Semicrystalline Block Poly-3-Hexylthiophene and the Amorphous Block Polystyrene
649i 2-Methyltetrahydrofuran (2-MeTHF) As a Versatile Green Solvent for the Synthesis of Amphiphilic Copolymers Via ROP, FRP and RAFT Tandem Polymerizations.
Neefe, S.
View Interesterification of Vegetable Oils Using Ferric Sulfate: Biodiesel Yield and Cloud Point Analysis.
Neerup, R.
754g Thermodynamic Modelling of FeCO3 Solubility Using the Extended Uniquac Model
Neeves, K. B.
613a 13c-MFA of Human Platelet Metabolism
Neeway, J.
344q A Multidirectional Approach to Understanding and Controlling Zeolite Crystallization
387c The Multifunctional Role of Zinc on Zeolite Growth
387g A Mutlidirectional Approach to Understanding and Controlling Zeolite Crystallization
Negahban, S.
3ax Determining the Phase Boundary of Gas Hydrates Using a Novel Unified Equation of State
632d Phase Behavior of High-Pressure CH4-CO2 Gas Hydrates in NaCl Solutions
Neglia, F.
263a Computational Fluid Dynamic Simulations of Experimental and Natural Granular Flows: First Insights into the Flow-Wall Interaction Dynamics
Negri, V.
34c Exploring the Economic and Environmental Potential of a Large-Scale Biomass Supply Chain for Carbon Dioxide Removal in the European Union.
194b Introducing Sustainability Criteria in the Chemical Engineering Design Projects: A Case Study of Green Ammonia
Neimark, A.
199f Pore Level Decomposition of Adsorption Isotherms in Metal Organic Frameworks
323b Deformation of Nanoporous Materials in the Process of Binary Adsorption: Methane Displacement By Carbon Dioxide from Microporous Carbons.
Neiro, S.
342b An MILP Formulation for the Short-Term Scheduling of Batch and Continuous Processes Presenting Heterogeneous Processing Times
Neithalath, N.
564e Dispersing Nano- and Micro-Sized Portlandite Particulates Via Electrosteric Exclusion at Short Screening Lengths
Nejahi, Y.
16j Unsupervised Optimization of Non-Bonded Parameters in Molecular Mechanics Force Fields Using the Particle Swarm Method.
346aw GPU Optimized Monte Carlo Version 2.50
Nejati, S.
325d Electrocatalytic Activity of Conjugated Polymers in Oxygen Reactions
341y Investigation of the Effect of Design Parameters and Operational Conditions on a Hollow Fiber Vacuum Membrane Distillation Module
351at Anti-Bacterial Chitosan-Copper Supramolecular Assembly for Coating Thin-Film Composite Membranes
495h Crystallization of Conjugated Polymers during Oxidative Polymerization from Vapor Phase
530d First-Principles Insight into Synthesis and Electrocatalytic Activity of Porphyrin-Based Covalent Organic Frameworks
649g Electrochemical Polymerization of Polyfunctional Macrocyclic Monomers: Bottom-up Synthesis of Porphyrinic Covalent Organic Frameworks
701a Poly(homopiperazine-amide) Thin Film Composite Nanofiltration Membrane for Heavy Metal Ions Removal
725a Development of Membranes with Special Wettability for a Solar-Driven Water Desalination Scheme
44a Mechano-Activated Shape Morphing of 3D Printed Ion Gels
Nelson, A. Z.
130c Embedded Droplet Printing for Spherical Crystallization of Pharmaceuticals
Nelson, C. M.
237d Quantifying the Effects of Elevated Hydrostatic Pressure on the Barrier Function of Mammary Epithelial Cells
334ar Quantifying the Effects of Hydrostatic Pressure on the Barrier Function of Mammary Epithelial Cells
549g 3D-Printed Models of Organ Development (INVITED SPEAKER)
473b Reverse Water-in-Perfluorocarbon Emulsions for Pulmonary Drug Delivery: Effects of Surfactant Concentration on Drug Mass Transfer and Droplet Coalescence
Nelson, P.
48a Tandem Metal Nanoparticle-Oxidase Catalysis for Selective Oxidation Reactions
Nelson, R.
444a The Science of Sexual Harassment
Nelson, T.
162ai Porous and Ultrasoft Membranes for Biomicroreactors with Modulated Stiffness Enabled By Soft Dendritic Colloid Nonwovens
Němec, J.
513dj Effectiveness Factor in Catalytic Particulate Filters
Neogi, P.
378d Convective-Diffusive Transport in Krogh Cylinders
369e Sensor Integrated Continuous Microfluidic Mixer for Protein Screening at Constant Supersaturation
435f Computational Approaches to Scale-up and Tech-Transfer in Agitated Filter Bed Drying
469d Temperature Control Approaches for Cooling Crystallization Using a Continuous Microfluidic Mixer
561c Continuum Simulations of Heat and Mass Transfer in Wet Granular Mixtures
576d Maneuvering Around Liquid-Liquid Phase Separation (LLPS) to Enable Development of Robust Crystallization Processes.
646d Dual Chamber and Membrane Embedded Continuous Microfluidic Device for MOFs Screening
Nesaei, S.
565e Liquid Metal Microparticle-Based Polymer Nanocomposites and Their 3D Printing
Nett, Z.
251e Nanophotonic Luminescent Solar Concentrator Design for High Efficiency, Low Cost Photovoltaics
Netze, L.
578a The Melon Toolbox: Machine Learning Models for Optimization
Neufeld, C.
157v A Mechanistic Analysis of Recombinant Adeno-Associated Virus Productivity in Biomanufacturing
667d Mathematical Modeling of Gene Therapy Manufacturing
Neurock, M.
111a Tracking the Elementary Kinetics and Dynamic Evolution of Molecular Structures during Biomass Pyrolysis
186a First Principle Insights into Molecular Transformations That Control Electrochemical Organic Synthesis in the Production of Pharmaceutical and Chemical Intermediates.
334ad Influence of Natural Catalytic Environments on the Activation of Cellulose Via Fast Pyrolysis
383d Mechanistic Insights into the Role of Alkaline Earth Metals in Primary and Secondary Reactions during Cellulose Pyrolysis
513r Understanding Ionic Liquid Assisted Selective CO2 Reduction over Bi Catalyst
677a Solvent Molecules Cocatalyze O2 Reduction through Proton-Electron Transfer Pathways on Pd Nanoparticles
704d Effect of Pd Coordination and Isolation on the Reduction of O2 to H2O2 over PdAu Bimetallic Catalysts
Neves, M.
168b Effects of the Subphase pH on the Isothermal Compressibility of Interfacial Molecular Films Containing Crude Oil Amphiphilics
Neveu, A.
84g Granular Material Characterisation at the Macroscopic Scale for the Validation and the Calibration of Numerical Models
564d Characterization of Powders Spreadability in the Framework of Additive Manufacturing Processes
Newby, P.
85a Batch-to-Continuous Transition in the Specialty Chemicals Industry:  A Case Study for Intensification of Dispersants Production
Newlon, Z.
312c Automated Detection of Yeast Genetic Engineering in Whole Genomes and Metagenomes with Prymetime
Neyerlin, K. C.
472a Improved Fuel Cell Performance Incorporating a Novel Ionic Liquid-Functionalized Electrolyte
485e Achieving High PEFC Performance at Rated Power through Modifications to Electrode Microstructure
Nezam, I.
365d Multi-Technique Study of Oxidative Degradation of Supported Poly(ethylenimine) sorbents for CO2 capture
Ng, C.
14f Keynote: Integrating Cybersecurity into PHA and PSM
Ng, K. Y. S.
164f Mg3N2 doped Li7P3S11 Solid Electrolytes with Improved Interfacial Compatibility in All Solid-State Li-S Battery
592b Effect of Thickness and Dopant on the Electrochemical Performance of Li3PS4 thin Glass Electrolyte for Solid State Lithium Sulfur Batteries
592c Mg3N2 doped Li7P3S11 Solid Electrolytes with Improved Interphase Compatibility in All Solid-State Li-S Battery
Ng, S.
97d Environmental Division: Student Awards
View Green Collar Engineering Opportunities for Chemical Engineers
Ngamsidhiphongsa, N.
3bd On the Pyrolysis Kinetics of Plastic Waste: Kinetic Analysis for Devolatilization Stage
Ngelale, R. O.
258b Low LET Gamma and High LET Alpha Degradation Studies of the Actinide Lanthanide Separation Process
334af Radiolytic Degradation of Organic Solvents in the Actinide Lanthanide Separation Process (ALSEP) for Nuclear Waste Treatment
Ngo, A.
157ai Foodborne Pathogen Detection: Identification of Protein Catalyzed Capture Agents Targeting E. coli O157:H7
Ngo, A. T.
637f Theoretical Evidence of Water Serving As a Promoter for the Cathode Reaction in Aprotic Li-O2 Battery
Ngo, D. T.
111d Aldol Condensation of Cyclopentanone and Acetone on MgO: A Mechanism Study By DFT
319f Micro-Scale Vof-CFD Model of Pressurized Air-Water Bubble Column: Effects of Bubble Flow Regime and Turbulence Model on Hydrodynamics
319h Hydrodynamics and Heat-Transfer Characteristics of H2-Vacuum Residue Slurry Bubble Column Reactor
535c CO2 Methanation Via Chemical Conversion in Bubbling Fluidized Bed and Biological Conversion in Stirred Bubble Column: Reactor Design Using CFD
Ngunjiri, J.
32c High Throughput Research to Evaluate and Balance Performance of Additives in Formulations
Nguyen, A.
513fd High-Throughput Determination of Active Site Nuclearity Distribution across Binary Intermetallics for Ethylene Hydrogenation
656g Towards Design of Active Site Requirements of Selective Hydrogenation of Different Functionalities
Nguyen, A.
514h Impact of Solvated Water on Adsorption of Selenium Oxo-Anion on <012> Hematite and Alumina Surface
Nguyen, B.
639c Rapid Detection of Fentanyl Levels Via Electrochemical Approach for Point-of-Care Diagnostics
Nguyen, C.
261b Regimes of Impact-Induced Erosion of Particles of Varying Strength
Nguyen, D.
452e 3D Printed Gyroid-like Structured Packings
Nguyen, D. H.
158k Engineering Vascular Cells and Macro-Fluidic Platforms for Physiological Organ and Tissue Culture
549f 3D Organotypic Cancer Model: Revealing Vascular Ablation during Pancreatic Cancer Invasion
Nguyen, F. T.
405c Nir-Fluorescent Carbon Nanotube Sensors: Form Factors and Applications
459a Molecular Recognition and In Vivo Detection of Temozolomide and 5-Aminoimidazole-4-Carboxamide for Glioblastoma Using Fluorescent Nanosensors
Nguyen, H. G. T.
323e High-Pressure Reference Adsorption Isotherms Using Reference Materials
Nguyen, J.
502d Thermochromic Fibers Via Electrospinning
Nguyen, K.
586e The Performance of PdxAu1-X RCT-SiO2 for the Partial Oxidation of Alcohols: Effects of Molecular Weight and Operating Temperature on Selectivity and Conversion.
Nguyen, L. X.
319f Micro-Scale Vof-CFD Model of Pressurized Air-Water Bubble Column: Effects of Bubble Flow Regime and Turbulence Model on Hydrodynamics
Nguyen, L.
556e Engineered CRISPR/Cas12a System As a Sensitive Diagnostic Tool for Detecting HCV, HIV, and SARS-CoV-2
Nguyen, L.
683c Optimal Packing of CO at High Coverage on Pt(100) and Pt(111) Surfaces
Nguyen, M. T.
597f Effect of Zwitterionic Molecules on Ionic Association and Transport in Single-Ion Conducting Polymers: A Molecular Simulation Study
Nguyen, M. T.
738c Tuning CO2 Reduction over Single Rh Atom on Fe3O4(001) Via Surface Hydroxylation
Nguyen, M.
160l Metabolic Engineering of E. coli for the Sustainable Production of Short-Chain Esters
Nguyen, N.
659f Solar-Thermal Ammonia Production: A Renewable, Carbon-Neutral Route to Ammonia
695f Invited Talk: Screening and Characterization of Reduction/Oxidation-Active Reactions of Mixed Ionic-Electronic Conducting Materials for Air Separation
Nguyen, P. T. T.
655h Advanced Fabrication and MULTI-Properties of Rubber Aerogels from CAR Tire Waste
700a Recycling Plastic Waste into High-Valued Engineering Aerogel Materials
Nguyen, P. T. T.
163k Metal Oxide Aerogels Development from Metal Scraps for High-Value Engineering Applications
Nguyen, Q. A.
487g Scalable Surface Application of Stabilized Lithium Metal Particles (SLMP) for Enhancing Silicon-Based Anode in Full-Cell Lithium-Ion Batteries
Nguyen, Q.
737c Assessing the Effect of Biomass Properties on Biomass to Biofuel System Performance Using Overall Operating Effectiveness
118c Hydrodynamic-Induced Stress Distribution Experienced By VWF Protein Models
Nguyen, R.
757f Algae Cultivation in a Space Station-Based Biorefinery
Nguyen, S. C.
666d Adsorption of Organic Micropollutants to Polymer Surfaces Probed By Second Harmonic Scattering Laser Spectroscopy
Nguyen, S.
334c Understanding Second-Shell Catalyst Interactions for Enhancing the Performance of Arylborane-Catalyzed Epoxide Ring-Opening
653c Strong Influence of the Nucleophile on the Rate and Selectivity of 1,2-Epoxyoctane Ring-Opening Catalyzed By Tris(pentafluorophenyl)Borane
704a Increasing the Selectivity of B(C6F5)3-Catalyzed Epoxide Ring-Opening Using Hydrogen Bonding
Nguyen, T.
408f Experimental Humid Post-Combustion CO2 Capture Using a Metal-Organic Framework, Calf-20 By Vacuum Pressure Swing Adsorption
566f Characterization of Calf-20: A Water Stable Metal-Organic Framework for Humid Post-Combustion CO2 Capture
Nguyen, T.
157aa Process Analytical Technologies for Recombinant Adeno-Associated Virus-Based Gene Therapy
157v A Mechanistic Analysis of Recombinant Adeno-Associated Virus Productivity in Biomanufacturing
667d Mathematical Modeling of Gene Therapy Manufacturing
Nguyen, T. D.
125c Viscosity Considerations for Accurate Coarse-Grained Simulations of the Interface between Immiscible Fluids in a Nano-Slit
484i Collapse of Particle-Laden Interfaces: Effects of Surfactants
484b Computational Study of Oscillating 3-Phase Contact Line on Flat Surfaces
Nguyen, T. V.
271d Immobilization of Invertase in Calcium Alginate Gel Capsules and Determination of Batch Kinetics
Nguyen, T. H.
161al Advanced Development of Elastic Polypropylene Aerogels for Thermal Insulation
Nguyen, T.
705c CO2 Assisted Oxidative Dehydrogenation of Ethane over Supported Metal Oxide Catalysts
Nguyen, T. D.
672b Codonadjust: A Software for in silico design of a Mutagenesis Library with Specific Amino Acid Profiles (Industry Candidate)
Nguyen, T.
46c Machine Learning-Based Prediction of Liquid Wettability of iCVD Polymers
Nguyen, T.
668d Spatially Controlled Stem Cell Differentiation Via Morphogen Gradients: A Comparison of Static and Dynamic Microfluidic Platforms
Nguyen, T.
66a Predictive Design of Biomimetic Nanomaterials Via Bottom­ up Approaches
673f Effects of Particle Polarizability in Their Two-Body and Many-Body Interactions
Nguyen, V. T. T.
723g Investigation of N-Terminal Segment Effects on α-Synuclein Aggregation through Discontinuous Molecular Dynamics
Nguyen, V.
304d Dispersivity in Porous Media Based on Lagrangian Scales
Nguyen, V. T.
714g Identification of Different Proton and Aluminum Species in H-ZSM5
756a Kinetic Role of Water on Evolution of Extra Framework Al Sites and Their Influence on Alkane Cracking
600e Oxide-Derived Tin Microspheres for Efficient CO2 Electroreduction to Formic Acid
Ngyuen, N. H. L.
62f Mechanistic Insight into CO2 Electroreduction over Single-Atom Catalyst Platform Via Operando Infrared Spectroscopy
319f Micro-Scale Vof-CFD Model of Pressurized Air-Water Bubble Column: Effects of Bubble Flow Regime and Turbulence Model on Hydrodynamics
319h Hydrodynamics and Heat-Transfer Characteristics of H2-Vacuum Residue Slurry Bubble Column Reactor
Ni, C.
509b Metabolite-Responsive Transcription Factors for Feed Activated Pathway Expression in E. coli
513a The Catalytic Effect of Ash Content on CO2 gasification of Biochar
Ni, M.
208d Reaction Characteristics of Copper Oxides for Solar Thermochemical Energy Storage
Ni, Z.
35a Curating a Comprehensive Set of Enzymatic Reaction Rules for Efficient Novel Biosynthetic Pathway Design (Industry Candidate)
Niazi Ardekani, M.
117a Simulations of Red Blood Cells As Oxygen Sensors That Control Blood Flow in Microchannels
331g A New Phase Equilibrium Calculation Method at Volume, Temperature and Moles Specifications
352n Approximate Density-Based Phase Envelope Construction Including Capillary Pressure
352v Highly Robust and Efficient Reduction Method for Phase Stability Testing in a Minimization Framework
Nicholas, C.
345g Quality Improvement in Graduate Chemical Engineering Kinetics
Nichols, M.
374a Long-Term Heel Transformation during Cyclic Adsorption-Desorption of Volatile Organic Compounds in a Full-Scale Adsorber-Desorber
Nicholson, B.
33g High-Performance, Scalable Nonlinear Programming Algorithms with Pynumero and Pyomo
Nicholson, D. A.
161y Model of Nonisothermal Blown Film Extrusion Using the Perturbation Expansion Technique
553i Slip-Link Study of Partially Crystallized Industrial-Grade LLDPEs
Nicholson, D. M.
86j Entropy Calculation from Molecular Dynamics Simulation
Nicholson, M. A.
652d Design and Scale-up of Tvsa Cycle for CO2 Removal from Spacecraft Cabins Using a Structured Adsorbent
664d Recent Advances in Plastics Upcycling
689c Upcycling Waste Polyesters to Polymers for Additive Manufacturing
527f Relationship between Structural Properties and Self-Diffusion of Molecular Mixtures in Nafion By High Field Diffusion NMR in Combination with SANS and SAXS
Nickerson, J. M.
View Histochemical Analysis to Investigate the Efficacy and Safety of Suprachoroidal Injection in Rodents Using Microneedles
Nie, X.
36e Challenges in Implementing in2O3 Catalyst for CO2 Hydrogenation to Methanol: H2o Effect and Stability
Niederberger, J.
745c Real-Time Optimization of a Reduced-Order Residue Fluidized Catalytic Cracker Model with Trust Region Method
Nielander, A.
490a Electrolyte Engineering for Efficient Electrochemical Nitrate Reduction to Value-Added Products
513fn Methods for the Analysis and Promotion of Electrocatalytic N2 Reduction
Nielsen, C.
3es Numerical Method Development for Process Optimization and Design
334q Modeling and Optimization Approaches for Process Development
461g A Nonsmooth Approach to Multicontaminant Water Integration
Nielsen, C.
277c Decomposition of Organic Compounds in Water Using Photocatalyst and Mist
760a Optimizing Factors to Increase Soil Microbial Fuel Cell Performance
Nielsen, D.
253b Exploiting Inter-Strain Metabolic Cooperation for CO2 Recycling and Increased Carbon Conversion Efficiency during Biofuel Production
Nielsen, R. F.
17g A Hybrid Model Based Model Predictive Control Strategy for Particle Processes
522e A Hybrid Modelling Framework for on-Line Data-Driven Modelling of Particle Processes
Nieman, K.
687e Accounting for Equipment Stress in Economic Model Predictive Control
Niemann, V.
666e Synchrotron-Based X-Ray Spectroscopy of Foulants on Reverse Osmosis Membranes
Niepa, T. H. R.
245b Characterization of Interfacial Films of Mucoid and Nonmucoid Pseudomonas Aeruginosa Isolates.
330b Multifunctional Nanoculture System for Studying Microbial Dynamics
Nieves-Otero, P.
540h Using Photodegradable Hydrogels to Rapidly Screen, Isolate, and Characterize Cells with Rare Phenotypes
591d Multipurpose Automated Optimization Platform for Reactions Involving Solids
View Sponsored Technology Workshop - Engineering, Data Science and Open Access - Cambridge University Press
48a Tandem Metal Nanoparticle-Oxidase Catalysis for Selective Oxidation Reactions
317d Alloying and Ligand Effects in Supported Gold Nanoparticle Catalysts for CO Oxidation
751e Supported Gold Clusters with Modulated Environment As Highly Stable Catalysts for Propylene Epoxidation
Nijhuis, J.
642g Selection of Functional Solvent Factory for Automatic Aldehyde and Ketone Separation in Aldol Reaction: A Combined Simulation and Experimental Approach
Nikbin, N.
218f Reactor Network Development for Multiple Rigid Polyol Productions
Nikolakopoulou, A.
334v Automated Optimization and Control of Modular Chemical Systems
716c Polynomial Narmax-Based Nonlinear Model Predictive Control of Modular Chemical Systems
Nikolaou, M.
346af Machine Learning the Fundamental Tradeoffs between Conductivity and Voltage Stability in Solid State Electrolytes
Nikolic, H.
512z Using the Carbon Capture Simulation Initiative (CCSI) Tool to Design the Experiments in the Parametric Campaign of a Novel Compact Absorber for Carbon Capture
685b NH4oh Looping with Membrane CO2 Absorber and Distributed Stripper for Enhanced Algae Growth
Nikolla, E.
82f Engineering Catalysis at Solid–Solid Interfaces Using Non-Precious Mixed Metal Oxides for Energy Storage in Batteries
346i Predicting an Optimal Oxide/Metal Interface Catalyst for Hydrodeoxygenation Chemistry of Biomass Derivatives
472h Design Strategies for Efficient Mixed Metal Oxide Electrocatalysts: Correlating Measurable Oxide Properties with Electrocatalytic Performance
712d Transient Kinetic Characterization Surface Oxygen Species to Understand Steady-State Performance of Oxidative Coupling of Methane
Nikooei, E.
702b Investigating Effects of High-Speed Non-Condensable Gaseous Flow on Separation of Volatile Compounds from Wastewater
Nikzad, S.
325i Stretchable and Fully Degradable Semiconductors for Transient Electronics
Nikzad, S.
135a Inducing Molecular Ordering of Polymer Semiconductors in a Secondary Insulating Polymer Matrix to Enable Efficient Charge Transport
351aw The Effect of Extensional Flow on the Evaporative Assembly of Donor-Acceptor Semiconducting Polymers
Nilsson, A.
513dx Insights from Ultrafast Optical Pump - X-Ray Probe Studies of Adsorbate Excitation
Nilsson Lill, S.
231g Mitigating Punch Sticking Propensity of Celecoxib By Cocrystallization – an Integrated Computational and Experimental Approach
Nilsson, M.
258b Low LET Gamma and High LET Alpha Degradation Studies of the Actinide Lanthanide Separation Process
334af Radiolytic Degradation of Organic Solvents in the Actinide Lanthanide Separation Process (ALSEP) for Nuclear Waste Treatment
Nimlos, C. T.
102b Influencing Aluminum Proximity in MFI Zeolites Using Mixtures of Structure-Directing Agents and Consequences for Brønsted Acid-Catalyzed Methanol Dehydration
628a Effects of Cu-Zeolite Pore Size, Shape, and Connectivity on the Selective Catalytic Reduction of NOx with NH­3
714b Assessing the Kinetic Effects of Al Siting on Methanol Dehydration in Different Zeolite Void Environments Using Density Functional Theory
Ning, B.
260c (Invited Talk) Quantitative and Ultra-Sensitive Saliva Test with Cellphone for COVID-19
483d The Measurement of Solute Mixing Rates in the Flow of Concentrated Suspensions through Straight Conduits
Nisal, A.
118d Personalized Medicine for in Vitro Fertilization (IVF) Procedure with Ganirelix Protocol
506a An Integrated Model for Food-Energy-Water Nexus to Study Global Sustainability
Nisbet, A.
466c Biomimicry of the Hypoxic Tumour Microenvironment of Pancreatic Cancer in 3D – on the Design of Novel Studies of Radiotherapy Combined with a Static Magnetic Field
635f Developing a Dynamic (PERFUSION BASED) Multicellular Pancreatic Cancer MODEL
Nissinen, T.
162aj From Biowaste Originated Nano SiO2 to Biogenic Graphite – from Scratch to High Value Product
Nitiyanandan, R.
476b Molecular Engineering of Aminoglycoside-Derived Hydrogel Platform for 3D Organoid Generation As a Cancer Dormancy Model
497f Synergistic Combinations Using APE1 Inhibitors for Ablation of Advanced Melanoma
Nitta, H.
346ao Full-Atomistic Entangled Polymer Structure Generation Using Reverse-Mapping from Breads-Spring Models.
Niu, A.
260c (Invited Talk) Quantitative and Ultra-Sensitive Saliva Test with Cellphone for COVID-19
461d Designing and Optimizing Energy Policies through a Novel Energy Price Predictive Framework
Nkosi, D.
682d Three-Dimensional Dynamic Culture Improves Extracellular Vesicle Production and Cargo Profile of Human Mesenchymal Stem Cells through Altered Biogenesis
Noble, R. D.
196b Novel Materials for Membrane Applications
Nockett, A. J.
646e In Situ Polymorph Transformation of a Pharmaceutical Intermediate
Noël, T.
642g Selection of Functional Solvent Factory for Automatic Aldehyde and Ketone Separation in Aldol Reaction: A Combined Simulation and Experimental Approach
Noel, V.
270a Reactive Imbibition of Acidic Hydraulic Fracture Fluids into Unconventional Shales
Noguera, D. R.
517b Upgrading Chemically Depolymerized Lignin into Value-Added Products: Maximizing Feedstock Utilization
621e Tandem Chemical and Biological Catalysis: Production of 2-Pyrone-4,6-Dicarboxylic Acid Via Lignin Valorization
Noguera, M. J.
165i Toxicity of Magnetic Nanocomposites Using Zebrafish As a Biological Model
3bf Kinetic, Spectroscopic, and Theoretical Approaches to Developing Structure-Function Relations for Heterogeneous Catalysts
Noh, J.
27g In-Situ Simulation of Jagged Pt Nanowire for Hydrogen Evolution Reaction
428h Theoretical Insights into the Potential-Dependent Competition between Electrochemical Nitrogen Reduction Reaction and Hydrogen Evolution Reaction
101b SDP-Quality Bounds Via Convex Quadratic Relaxations for Global Optimization of Mixed-Integer Quadratic Programs
Nokhayeva, D.
337e Evaluations of Three Low-Cost PM Monitors Against a Reference PM Instrument
Noll, D.
526b Designing Sophisticated Imidazolium Ionenes: A Structurally and Functionally Tailorable Platform for High-Performance Engineering Applications
Noll, L.
686e Economic Comparison of Reactive Distillation (RD) to a Benchmark Conventional Flowsheet: Regions of RD Applicability and Trends in Column Design.
Nomngongo, P.
514m Exploration of Iron Functionalized Biochar and Activated Carbon for Cr(VI) Aqueous Sequestration
Nomura, C.
289e Production of Polyhydroxyalkanoates from Brewer's Spent Grains: Biodegradable Bioplastics from Agro-Industrial Waste
Noor Alam, A.
727f Application of Innovative Low-Cost Bio-Flocculants for Enhanced Wastewater Treatment
Nopens, I.
561e Towards a Generic Model for Twin-Screw Wet Granulation: Calibration and Validation of an Improved PBM for Multiple APIs.
674f Coupling Mechanistic and Data-Driven Models By Means of Neural Differential Equations to Incorporate Unmodeled Dynamics
Nordin, G. P.
445f Droplet Generation in 3D Printed Microfluidics Using a Hydrophobic Resin
Nordstrom, F.
409e Formation of Solid Solutions As a Key Impurity Retention Mechanism in Solution Crystallization in the Presence of Structurally Similar Impurities
Norgard, R.
549f 3D Organotypic Cancer Model: Revealing Vascular Ablation during Pancreatic Cancer Invasion
375e What Makes Sensors the Basis of Any Digital Transformation?
3n A Weak Formulation for Supercooled Stefan Problem in Horizontal Ribbon Growth
461c Weak Formulation of Supercooled Stefan Problem for Solidification of Pure Silicon in Horizontal Ribbon Growth
Norouzi Darabad, M.
425e Predicting the Traffic of Confined Microfluidic Droplets Using Machine Learning
Norouzi, S.
252g Microfluidic Flow of Blue Phase Liquid Crystal
352c The Effect of Flow on Frustrated Polymer-Stabilized Blue Phase Liquid Crystals
443e Stabilizing Blue Phase Liquid Crystal Under Spherical Confinement
Norris, E.
350y Enabling Nano-Insecticides: Biodegradable Nanoparticle Biodistribution in Aedes Aegypti Mosquitoes
Nørskov, J.
513fj The Relationship between Bulk Crystal Structure and Surface Reactivity for Machine Learned Iridium-Oxide Polymorphs
Norskov, J.
82b Acidic Oxygen Evolution Reaction Activity-Stability Relationships in Ru-Based Pyrochlores
126f Effect of Electric Field on Kinetic Modeling of the ORR: Rationalizing pH Behavior of Metal and Oxide ORR Catalysts
126g Materials Discovery: Non-Precious Metal Catalysts for the Oxygen Reduction Reaction
127h Insight into Electrolyte and Ion Effects in Carbon Dioxide Reduction Electrocatalysis
186c Insight into Nonaqueous Solvent Transition Metal Interfaces from First Principles Calculations
427a Scaling Relations in Homogeneous Catalysis: Analyzing the Buchwald-Hartwig Amination Reaction
428f Theoretical Insight into the Surface Dynamics of Lithium-Mediated Nitrogen Activation
428g Cyclic Stabilization Method for Lithium Mediated Electrochemical Nitrogen Reduction
472d Accelerated Discovery of Stable and Active Materials for Oxygen Electrocatalysis
488c Free Energy Surface of Nitrogen Dissociation on Ru(0001) from First Principles Molecular Dynamics with Enhanced Sampling Methods
586b Pt Single-Atom Formation and Nano-Clustering Triggered By Dynamic Surface Reconstructions of an Oxide Support
599d Novel Approaches to Efficient Pourbaix Stability Analysis of Multicomponent Systems
599f Unified Approach to Implicit and Explicit Solvent Simulations of Electrochemical Reaction Energetics
656h Screening the Performance of Silver Bimetallic Systems for the Oxygen Reduction Reaction in Alkaline Electrolyte
750f Metal-Organic Frameworks for Oxygen Electrochemistry
Northcutt, L.
162au Stiffness in a Bone Marrow Mimetic Microenvironment Alters Breast Cancer Cell Invasiveness and Proliferation
Northern, T.
312g Using Fabricated Ecosystems to Develop Approaches for Microbiome Engineering (Invited Speaker)
Norton, M. G.
233d Ethanol Steam Reforming on SOFC System with Internal Catalyst Reforming Layer
Norwood, S.
406f Accelerated Prediction of Atomically Precise Cluster Structures Using on-the-Fly Machine Learning
162ax Insitu 3D Printing of Adhesive and Conductive Bioink
162s Bioinspired Hydrogels for Development of Implantable Energy Storage Devices
Notario-López, A. M. Sr.
632c Experimental Determination of the Hydrate Phase Equilibria for H2o + C14H30 + C6H14 + C3H8o + CO2 System
Notebaart, R. A.
253d Application of Robust Dynamic Flux Balance Analysis Framework to a Wine Fermentation for Understanding and Steering Aroma Formation
Notestein, J.
334c Understanding Second-Shell Catalyst Interactions for Enhancing the Performance of Arylborane-Catalyzed Epoxide Ring-Opening
334l Elucidating Structure-Function Relationships of Metal Oxides and Sulfides for Rational Catalyst Design
346k Leveraging Quantum-Chemical Screening Methods to Guide the Discovery of Promising Metal−Organic Frameworks
384f Tandem Oxidative Chemical Transformations Using Electrochemically Produced Hydrogen Peroxide
631f Tuning the Reactivity of Metal−Triazolate Frameworks for the Catalytic Oxidation of Strong C−H Bonds
653c Strong Influence of the Nucleophile on the Rate and Selectivity of 1,2-Epoxyoctane Ring-Opening Catalyzed By Tris(pentafluorophenyl)Borane
704a Increasing the Selectivity of B(C6F5)3-Catalyzed Epoxide Ring-Opening Using Hydrogen Bonding
705d Generating Acidity in Metal Oxides with SiO2 Overcoats
738g Elucidating Structure-Function Relationships of Molybdenum Oxides for Catalytic Alkane Dehydrogenation
Noto, A.
348i Mixed-Gas Sorption of Ternary Mixtures of CO2, CH4 and C2H6 in PIM-1: Experimental Measurement and Thermodynamic Modelling
Nouar, F.
652h New Adsorptive PSA Separation Process for Production of Isopentane and Di-Methyl Branched Paraffins from C5/C6 Light Straight Naphtha Feeds
Nounou, H.
375b Designing Data-Based and Model-Based Methods for Process Monitoring and Equipment Degradation Tracking
Nounou, M.
375b Designing Data-Based and Model-Based Methods for Process Monitoring and Equipment Degradation Tracking
185d Nano-Confinement of Ionic Liquids for the Enhanced Performance of Gas Separation Membranes
484j Thermodynamics of Mineral Extraction from Martian Regolith Using Ionic Liquids: Insights from Molecular Dynamics Simulation
159d Active Colloidal Crystallites
295b Stokes Flow Past a Highly Deformed Sphere
483f Large-Scale Directional Motion By Symmetry Breaking in Active Magnetic Suspensions
Nouri, H.
191f Effects of Flexibility and Ionic Strength on Membrane Filtration of Poly(dT60) Single-Stranded DNA
Nowrin, F.
355b Ammonia Production at Milder Conditions for Distributed Manufacturing
Nowshad, F.
76d Gut Bacterial Product of Flavonoid Metabolism Exhibits Enhanced Aryl Hydrocarbon Receptor Agonist Activity in Caco2 Human Intestinal Epithelial Cells
758f Propane Dehydrogenation over Zn-Exchanged H-MFI Zeolites
Ntekas, Y.
218h On the Systematic Integration of Metabolic and Processes Engineering: The Case of Kerosene-Producing Saccharomyces Cerevisiae
Ntuli, L. M.
152f Ink Synthesis and Screen-Printing of Graphene Oxide Ink for Paper Based Electrochemical Sensors.
Numayama, M.
690e Synergistic Effect of Polyamines Against Lipid Oxidation As in Vitro Model Aging System
Nunes, P.
645d Insight into Amorphous Solid Dispersion Dissolution Behavior: Laser-Diffraction and Raman Spectroscopy Holding Hands
Nunes, P. D.
249d Modelling Amorphous Solid Dispersions: The Role of Supersaturation, Nucleation and Crystal Growth
Nunes, S. P.
348d Linking Microstructure of Membranes and Performance
Nuñez-López, J. M. Sr.
341c Resilience Approach at the Water-Energy-Food Nexus Optimization
341e Sustainable Crop Scheduling: Economics, Environmental and Occupational Health Aspects
341l Fair Solutions for the Optimal Design of Integrated Residential Complexes
Nunn, C.
414c Embedding Automation in the Pharma Research Laboratory to Enable Drug Substance and Product Development
Nunoura, T.
30a Hydrothermal Hydrogenation of Crotonic Acid over Activated Carbon and Nickel Catalysts
513dz A Green Process for Facile One-Pot Synthesis of Nickel Ferrite Anchored on Reduced Graphene Oxide for Water Treatment
514f Gas Separation Properties of Poly(Ethylene) Terephthalate Derived Carbon Adsorbents
Nuti, K.
540a Synthesis and Optimization of Hyaluronic Acid-Methyl Cellulose Thermogel for the Controlled Release of Viable Mitochondria
Nuxoll, E.
193b Thermally Triggered Biofilm Dispersion
688c The Role of Chemical Engineering in Sustainable Energy Policy
Nwaokorie, C. F.
106d Improving the Reusability of Machine Learning Models for Materials
513br Exceeding the Volcano Plot Maximum on Alloy Surfaces By Breaking Scaling Relations
710f Oxophilicity and Carbophilicity: Predictions across the Periodic Table
Nyambura, C.
650a Exploring Structure and Dynamics of PLGA-Based Materials in Solvents Relevant to Nanoparticle Formulation
Nyce, M.
518h Influence of Additives on the Performance and Failure Mechanisms of the Rechargeable Alkaline Zinc Electrode
518k Reducing Zinc Redistribution and Extending Cycle Life with Electrochemically Synthesized Zinc Oxide Anodes in Rechargeable Alkaline Batteries
Nyffeler, K. E.
99h Fabrication of Oil-Infused Anti-Biofouling Coatings on the Surfaces of Flexible Polymer Tubing
Nykypanchuk, D.
360b Self-Organized Protein Arrays Guided By DNA Origami Lattices
Nystrom, S. V. Jr.
714b Assessing the Kinetic Effects of Al Siting on Methanol Dehydration in Different Zeolite Void Environments Using Density Functional Theory
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z