510g
Towards Green Manufacturing of Biologically Inspired Nanomaterials: Degree of Mixing and Mixing Time Analysis
136b
Atomistic Study of Effect of Defects on the Thermal Conductivity of Metal-Organic Frameworks
200a
Effects of Adsorbates on Thermal Transport in Metal-Organic Frameworks
498c
Predicting Filtration Performance By Studying the Pore Network of the Filter Cake: The Case of Needle-like Crystals
View
Sponsored Technology Workshop - Instrumentation for Energy Device Research; from Material Studies to Cells to Full Stacks up to 1000V - Gamry Instruments
701g
Pilot Scale Osmotic Concentration Process for Reducing Injected Wastewater Volumes in Gas Field Operations
77h
Nanoporous Metal Soap Films Prepared By Interfacial Polymerization and Melt Processing for Gas Separation
758c
Structure of Fe(II) Sites Situated within the Nodes of Metal-Organic Framework Materials and Their Reactivity for Low Temperature Methane to Methanol Conversion
656f
Ab Initio Molecular Dynamics Reveals New Active Sites in Atomically Dispersed Pt1/TiO2 Catalysts
351bc
Carbon Molecular Sieve Hollow Fiber Membranes for High Purity Oxygen Production
184d
Separation of Azeotropic Refrigerant Mixtures Using Extractive Distillation with Ionic Liquid Entrainers
351af
Separation of Hydrofluorocarbon Azeotropic Mixtures Using Polymeric Membranes
514a
Project Earth: Environmentally Applied Research Towards Hydrofluorocarbons
544h
Separation of Hydrofluorocarbon Mixtures Using Ionic Liquids
617a
Azeotropic Fluorocarbon Refrigerant Mixture Separations Using Porous Material
157d
Biological Conversion of Methane into Polyhydroxybutyrate (PHB)
407c
Real-Time Monitoring of Powder Mass Flowrates for MPC/PID Control of a Continuous Direct Compaction Tablet Manufacturing Process
716b
A NMPC Strategy Applied to a Continuous Direct Compaction Tablet Manufacturing.
744g
Continuous Direct Compaction Tablet Manufacturing Characterization Using Data-Reconciliation and Residence Time Distribution Functions
126g
Materials Discovery: Non-Precious Metal Catalysts for the Oxygen Reduction Reaction
79b
Incorporation of Fine Powders into a Liquid with an in-Line Rotor-Stator
118b
Designer Mucus: Poolable and Tunable Airway Mucus for Biochemical, Biophysical, and Transport Studies
494g
Achieving High Retraction Velocity in a Bioinspired Resilient Hydrogel
159e
Dynamics of Cracking in Drying Saturated Colloidal Film
369b
Recrystallization Development for Small Molecule API (Active Pharmaceutical Ingredient) Islatravir
609b
Regenerative Engineering of the Rotator Cuff Tendon-to-Bone Interface Via Controlled Delivery of Insulin-like Growth Factor-1 and Its Mimics
423e
Anion Exchange Membranes with Maximized Combination of Durability and Conductivity
482e
Development of Polymer Electrolyte Membrane and Ionomer Binder Materials for Electrochemical Energy Conversion Technology
663c
Structure and Gas Transport Characteristics of Triethylene Oxide-Grafted Polystyrene-B-Poly(ethylene-co-butylene)-B-Polystyrene (SEBS)
532b
Programmable Shape-Morphing of Responsive Hydrogels and Hybrids
235d
A CFD-Based Process Design and Operation Analysis of Multi-Tube Membrane Reactor for Hydrogen Production
417c
Metal Loading Effects on the Stability of Ni-Ru Catalysts for Hydrogen Production from Liquid Hydrocarbons at High Pressure and Low Temperature
417d
Hydrogen Production By Liquid Fuel Reforming for on-Board Fuel Cell Applications
513bz
Study on Pressurized Steam Reforming Reactions of Cokes Oven Gas in Steel Industry
515i
Removal of Carbon Monoxide in a Post-WGS Gas Stream By Methanation Using Ni-Ru Catalysts
516h
Enhanced Water Gas Shift Reaction By Incorporating a Pd60-Cu40 Membrane Reactor
417d
Hydrogen Production By Liquid Fuel Reforming for on-Board Fuel Cell Applications
161ai
Composite Foams with SA Fillers to Increase Sound Absorption Efficiency
237a
Mechano-Evolution Results in Novel Cellular Phenotypes
714d
Framework Structures and Heteroatom Distributions in the Zeolite Catalyst SSZ-70
556d
MRI/S Based Assessment of Donor Efficacy in Stroke Treatment with Human Mesenchymal Stem Cells (Industry Candidate)
3fa
Biochemical and Cellular Libraries Reveal Cancer-Associated Histone Mutations That Perturb Nucleosome Structure and Inhibit Cell Differentiation
146c
Impacts of Relaxation Time and Cohesive Energy Density on Syneresis Time of Hydrogels Under Harsh Reservoir Conditions
3ce
An Optimized Polarization Model for Anode-Supported Solid Oxide Fuel Cells
View
Modelling of Droplet Combustion in Flame Synthesis of Nanomaterials
620g
Uncovering Hidden and Observable Features That Contribute to Tumor Aggression and Progression
330b
Multifunctional Nanoculture System for Studying Microbial Dynamics
22d
Inverse Emulsion Synthesis of Hydrogel-Coated Gold Nanoshells for Protein Biomarker Quantification
745c
Real-Time Optimization of a Reduced-Order Residue Fluidized Catalytic Cracker Model with Trust Region Method
18a
Predictive Modeling of Adsorption and Transport in Zeolites: From High-Throughput Screening to First Principles Simulations
92e
Creating Independent Researchers
201g
Assessment of the Two-Phase Thermodynamic Method for Calculating Adsorption Isotherms
653e
Computational Analysis of Aldol Condensation and Fission Reactions on Solid Acid Catalysts
147d
Dynamic Data Reconciliation, Parameter Estimation, and Plant-Wide Modeling of a Microwave (MW)-Assisted Direct Non-Oxidative Methane Dehydroaromatization (DHA) Process
384b
A Combined Experimental and Modeling Study of Thermal and Non-Thermal Effects of Microwave-Assisted Direct Natural Gas Conversion to Value -Added Chemicals
430b
Microwave-Assisted Methane Conversion on High Microwave-Sensitive Catalysts
562c
Catalytic Materials and Process Development for Microwave-Assisted Ammonia Synthesis
724e
Towards Elucidating Critical Properties of Fe-ZSM-5 for Methane DHA
724f
Mechanistic Study of Structured Gallium and Platinum Promoted ZSM-5 in Ethane Dehydroaromatization Including Characterization By Pyridine Drifts
734a
Direct Non-Oxidative Conversion of Shale Gas to Aromatics: Dynamic Data Reconciliation, Parameter Estimation, and Dynamic Modeling of a Fixed-Bed Reactor
544j
Functionalized Ionic Liquids Based on Vegetable Oils for Rare Earth Elements Recovery
513ew
Solvothermal Synthesis of Defect-Rich Mixed 1T-2H MoS2 Nanoflowers for Enhanced Hydrodesulfurization
424e
A Polyketide Synthase Platform to Produce Biofuels and Specialty Chemicals (Faculty Candidate)
91a
From Genes to Cell Types to Behavior: Molecular Classification of Zebrafish Retinal Ganglion Cells
598e
Preparation of Multifunctional Carbon-Supported Irru Catalyst By Novel Acidic Polyol Procedure for Fuel Cell Application
122b
Effect of Hydrogel Formulation on Vitamin E Uptake and in Vitro Drug Release Kinetics for Improved Drug Release from Contact Lenses
268c
On Demand Treatment of Wastewater Using 3D-Printed Membranes
162b
Bio-Inspired Pseudo SAMs Coating to Increase the Hemocompatibility of a Microfluidic Photoreactor for the Treatment of Neonatal Jaundice
26e
Predictive Approach to Understand and Eliminate Tablet Breakage during Film Coating
82b
Acidic Oxygen Evolution Reaction Activity-Stability Relationships in Ru-Based Pyrochlores
106f
Active-Learning Framework for the Discovery of Novel Materials for Catalysis
187e
Unraveling Selectivity Toward Multi-Carbon Products for Electrochemical CO(2) Reduction
513fj
The Relationship between Bulk Crystal Structure and Surface Reactivity for Machine Learned Iridium-Oxide Polymorphs
70e
Functionalizing Fe3O4 Nanoparticles for Local Luminescence Probing and Mediation of Heat Transfer in Induction Heating Catalysis
136e
Dual-Signal Downconversion Luminescent Nanoparticles Harnessing Changes in the Surface Dipole As a Novel Approach for Small Molecule Detection
158h
High-Throughput Generation and Study of 3D Spheroids in a Thiol-Acrylate Hydrogel Scaffold Using a Droplet Microfluidic Trapping Array
357h
Extraction and Characterization of Sodium Alginate Extract from Sargassum Natans
227b
Carbon Nanotube Photoluminescence in Chemical Biology
305c
Beyond Power: CO2 Capture from Industrial Sources with PolarisTM Membranes
187c
3D Flow Cell Simulation Via Accelerated Buffer Chemistry
233c
Microbial Electro-Methanogenesis Coupled with in-Situ Hydrogen Generation for Biogas Upgrading
326c
Gas to Liquid Flow Reactor for Conversion of Biogas or Waste Methane to Organic Acids with Hydrogel-Encapsulated Methanotrophs As Fixed Biocatalysts
398j
Electrochemical Systems Optimization Using Physics-Based Homogenization of the Microscopic Continuum Models
675h
Advanced Mass Transport Properties of 3D-Printed Porous Periodic Lattice Graphene Flow-through Electrodes
685a
Advanced Manufactured Carbonate Materials for CO2 Utilization in Algal Biomass Production
255c
Data-Driven Optimization of Microwave-Assisted Continuous-Flow Microreactor for Biomass-Derived Carbohydrates' Conversion
293c
A Wavelength-Induced Frequency Filtering Method for Extending Fluorescent Biological Assays In Vivo
395c
Atomically-Thin Sensing Surfaces from 2D Materials for Detecting Cellular Gaps
459a
Molecular Recognition and In Vivo Detection of Temozolomide and 5-Aminoimidazole-4-Carboxamide for Glioblastoma Using Fluorescent Nanosensors
334u
Lignin Depolymerization and Esterification By Carboxylic Acids to Produce Biodiesel
71b
Ecosystem Services As Unit Operations: Integrated Design of Constructed Wastewater Treatment Wetlands By Simulation Software
401a
Reaction Networks in Multi-Scale Modelling Frameworks for Sustainable Process and Product Design
471d
Spatially-Explicit Techno-Ecological Design for Sustainable Manufacturing Applied to a Power Plant
624a
Towards Sustainable Circular Economy: Design Framework and Application to Grocery Sacks
633b
Developing an Optimization Framework to Achieve Campus Carbon Neutrality with Both Technological and Ecological Solutions
658c
The Need for Convergence
718b
Climate-Resilient Process Design Using the Flexibility Analysis Approach
718c
Towards Integration of Design and Operation of Techno-Ecological Synergistic Systems
749c
Exploring a Computational Framework for Spatially-Explicit Absolute Sustainability Assessment Based on a Multi-Regional Hybrid Approach
352m
Development of a COSMO-Based Thermodynamic Model with Wertheim’s Thermodynamic Perturbation Theory
612i
Invited Talk: Understanding Radiative Transport in Flowing Particles Via Monte Carlo Ray Tracing and Data-Driven Techniques
314c
Bifurcation Analysis of Oxidative Coupling of Methane in Short Monolith/Gauze/Wire-Mesh Reactors
319g
Pressure Drop in Bubbly Gas-Liquid Flows in Packed-Beds in Zero Gravity: Analysis of Experimental Results from the International Space Station
513bw
Comparison of Autothermal and Cooled Tubular Reactor Designs for Odh of Ethane over Movtenbo Mixed Metal Oxide Catalyst
684g
Efficient Method for Real-Time Simulations of Monolith Reactors with Detailed Kinetic Models
352g
Experimental Determination of the Solubility of Eugenol in CO2, and CO2 + Supercritical Cosolvent up to 333 K
47h
Quantification of Total and Insoluble Hexavalent Chromium in Ambient Particulate Matter in Aktobe, Kazakhstan
566f
Characterization of Calf-20: A Water Stable Metal-Organic Framework for Humid Post-Combustion CO2 Capture
673k
The Role of Dimer Formation in the Nucleation of Superlattice Transformations and Its Impact on Disorder
461h
A Comprehensive Investigation of Dendrite Formation in Lithium Anode Batteries: A Computational Approach for Heterogenous SEI
467e
A Simulation Study of the Effect of CO on the Iron Particle and Nanotube Nucleation.
546a
Nucleation and Growth of Solid-Electrolyte Interphase Components at Electrode Surfaces: Role of Electrolyte Solution Chemistry and Concentration
637g
Solid Electrolyte Interphase Evolution and Passivation on Lithium Metal Anode
713a
Advanced Redox-Polymer Interfaces for Water Purifications: Electrochemical Reactive Separations
34f
Modeling and Optimization of Supply Chains of Perishable Products with Multiple Time-Varying Quality Attributes
340s
Moving Horizon Demand Response Scheduling Subject to Exogenous Uncertainties
471c
Optimization of a Spatially-Resolved Petrochemicals Manufacturing and Supply Chain Network
515s
A Rigorous Refinery Dynamic Model for Advanced Process Control and Operational Optimization
651b
Systems Analysis of Shale-Based Resources for Chemical Manufacturing
732f
Economic Optimization and Sensitivity Analysis of Ionic Liquid-Based Carbon Capture Plants
340s
Moving Horizon Demand Response Scheduling Subject to Exogenous Uncertainties
334w
Design of a High-Pressure Catalytic Photorreactor to Operate at Supercritical CO2 Conditions.
79a
High Shear (Rotor-Stator) Mixers, 25 Years Later
276d
Status of Modeling and Visual Observation of Mineral Scaling in High Temperature Aqueous Solutions
702e
Membrane Distillation Crystallization for Treating Mixed Salt Brines from Inland Desalination
163u
Scalable Synthesis of Ti3C2Tx Mxene
190f
Modernizing the Chemical Engineering Curriculum Via a Student-Centered Framework That Promotes Technical, Soft, and Tech-Savviness Skills: The Case of Unit Operations
245b
Characterization of Interfacial Films of Mucoid and Nonmucoid Pseudomonas Aeruginosa Isolates.
337k
Monitoring Inconsistent ELP Surface Modification By Thiol Desorption
52g
A Unifying Biomaterial for Constructing Chimeric Ex Vivo Neurovascular Tissue Structures
127f
CO2 Electroreduction on Modified Cu Catalysts: Using Subsurface Dopants to Enhance Catalytic Performance
715c
Rational Formulation Design of Multicomponent Membranes for Carbon Dioxide Separation
294h
Oxidative Coupling of Methane (OCM) By Dispersed-Phase Silica-Supported Tungsten Oxide Catalysts
506d
Utilization of Insoluble Mg Minerals As an Alternative Mg Source for Struvite Crystallization from Wastewater
513s
Probing the Role of H2s on CO2 Hydrogenation on MoS2
712f
Roles of Different Oxide Phases Present in Na- and Mn- Promoted W/SiO2 Catalysts during Oxidative Coupling of Methane (OCM)
731d
Conversion of Recycled Drywall into Nitrogen Efficient Fertilizers
740e
High Selectivity of Modified γ-Al2O3 for Propane Dehydrogenation Under H2s Treatment and Co-Feed
753f
Modular Plate Cold DBD Plasma Reactors for Dry Methane Reforming
191f
Effects of Flexibility and Ionic Strength on Membrane Filtration of Poly(dT60) Single-Stranded DNA
644c
Development of High-Solids, Quick-Set Pharmaceutical Tablet Coatings.
724g
Evolution and Control of Active Sites in Methane DHA: Insights from Ab Initio Simulations Guiding the Choice of Catalyst Precursor and Pre-Treatment Protocols
65d
Interactions between Surfaces Mediated By Polyelectrolyte Dispersants
738e
Mars Van Krevelen Catalytic Methane Combustion Via Formate Intermediates over Hematite: Atomistic Surface Studies and DFT
19b
Superacid Polymer Catalysts for Hydroxymethylfurfural Production
250a
Optimizing Filling of Anisotropic Templates in UV Nanoimprint Lithography
363c
Ion Gels from Polymerization of Self-Assembled Block Copolymer/Ionic Liquid/Monomer Mesophases
627b
Development of High-Throughput Cell Screening Toolkit for the Directed Evolution of Glycosynthase Enzymes for Bespoke Oligosaccharides Synthesis (Industry Candidate)
35d
Elucidation of Trophic Interactions in an Unusual Single Cell Nitrogen-Fixing Symbiosis Using Metabolic Modeling (Industry Candidate)
8f
AMBR®250 Scale-DOWN MODEL Limitations and MASS Transfer Characterization
518h
Influence of Additives on the Performance and Failure Mechanisms of the Rechargeable Alkaline Zinc Electrode
518k
Reducing Zinc Redistribution and Extending Cycle Life with Electrochemically Synthesized Zinc Oxide Anodes in Rechargeable Alkaline Batteries
592d
Molecular-Level Insights into the Defect Structures and Dynamic Electronic Properties of ZnO Formed in Rechargeable Zn-Alkaline Batteries
453f
Novel Porous Ternary Mg-Al-Ti Oxide Composite Nano-Adsorbents with Extremely High Arsenic Removal Capacity
68b
Transient Reacting Flow Simulation of Biomass Combustion in a Pilot-Scale Circulating Fluidized Bed Combustor
351aa
Self-Diffusion of Small Alcohols inside ZIF/Polymer Hybrid Membranes By Pulsed Field Gradient (PFG) NMR
682c
A Novel, Thrombo-Inflammatory Model to Study Platelet Adhesion and Thrombogenesis in Vitro
28b
Investigating Primary Nucleation in Polymer Melts Using GPU-Accelerated Wang-Landau Simulations
389a
Use of Agile and Scrum in Product Development
162m
Multifunctional Poly(vinyl alcohol) Nanocomposite Hydrogel Beads for Transarterial Chemoembolization
584f
A Numerical Investigation into the Correlation Function of Inelastic Hard Spheres Using Event Driven Particle Dynamics
131g
Particle Characterization in Blood Plasma Using Nanoparticle Tracking Analysis
346bg
Gmso: A Flexible, Python-Based Representation of Chemical Topologies for Molecular Simulation
694b
Partial Substitution of Phenol in Phenol-Formaldehyde (PF) Resin By Plant Biomass for Wood Adhesives
157bi
Engineering the Bioavailability of Sulfur to Control Iron Redox States in Acidithiobacillus Ferrooxidans
371d
Area 15C Bioengineering Plenary Award: Adventures in the Engineering of Oxidoreductase Enzymes
574a
Development of a Novel Bioprocess for CO2 Conversion to Biochemicals Using Synthetic Designed Proteins and Non-Growing Cells
752c
Glycerol-Based Intelligent Copolymer Film for Real-Time Monitoring of Food Spoilage
388f
Minimizing Surface Turbulence in Casting
557f
Hydrogen Adsorption- and Hydrogenation-Triggered Orientational Transitions of Liquid Crystals Adsorbed on Palladium Surfaces
151f
Chemically-Defined Generation of Aorta-Gonad-Mesonephros (AGM)-like Hematopoietic Stem and Progenitor Cells from Human Pluripotent Stem Cells
731g
Synthesis of Nitrogen-Containing Carbon Dots As Fe (III) Probe after Extracting Humic Acid from Compost of Sludge and Leaf
135a
Inducing Molecular Ordering of Polymer Semiconductors in a Secondary Insulating Polymer Matrix to Enable Efficient Charge Transport
210a
(Invited) Skin-like Wearable and Implantable Sensors
266d
Molecular-Level Redesign of Solid Polymer Electrolytes to Enable High Ion Conductivity and Electrochemical Stability
324i
Assembling Polymer Chains into Hierarchically Ordered Supramolecular Nanofibers
325i
Stretchable and Fully Degradable Semiconductors for Transient Electronics
351aw
The Effect of Extensional Flow on the Evaporative Assembly of Donor-Acceptor Semiconducting Polymers
373i
Conductive Hydrogels for Next-Generation Bio-Electronic Interfaces: Stiffness, Stretchability, and Dimensionality
440j
Rational Design of Capacitive Pressure Sensors Based on Material Properties and Architecture of Pyramidal Microstructures
347g
A Supramolecular Metal-Organic Framework with Permanent Porosity for Xe/Kr Separation
453b
CoNi Alloy Nanoparticles Embedded in Metal-Organic Framework-Derived Carbon for the Highly Efficient Separation of Xenon and Krypton via a Charge-Transfer Effect
513cm
Facile Fabrication of Hierarchically Porous MOF-Metal Nanoparticle Tandem Catalysts for the Synthesis of Bioactive Quinoline N-Oxides
530g
Role of Transition-Metal Dopants in the Activation of MoSe2 for Hydrogen Evolution Reaction
3cq
Unprecedented Polymeric Ionic Liquids (PILs) Membranes for Energy-Saving Separation Technology and Environmental Green Energy Applications
29c
Electrostatic Potential of Ionic Liquids As an Effective Screening Approach for CO2 Capture
348h
Fine-Tuning of Ionene Backbones with High-Free-Volume Elements for High-Performance CO2 Separation Membranes
526b
Designing Sophisticated Imidazolium Ionenes: A Structurally and Functionally Tailorable Platform for High-Performance Engineering Applications
526i
Effect of Molecular Architecture on Photopolymerization and Gelation of Coordinated Ionic Liquids
587g
Design of Robust, High-Performance Ionenes and Ionic Composites for Membrane-Based Gas Separations
618c
Tailoring Dual Anionic-Cationic Poly(ionic liquid) Composite Membranes for Advanced CO2 Separation
375d
CO2 Injection Monitoring with a Scalable, Automated Sparse Seismic Array
357f
Selective Separation and Recovery of Ionic Liquids (ILs) As Pretreatment Solvents for an Effective Recycling Approach
281g
High-Performance Base Oils with Unique Branching Structure through Hydroisomerization of Paraffinic Feedstocks
407b
Prediction of Entire Tablet Compositions from Pure Powder Spectra Using a Nonlinear Iterative Optimization Method
10b
Co-delivery of VEGF and BMP2 from gelatin microribbon scaffolds enhance endogenous cranial bone repair in vivo
270e
Multi Scale Flow Observation and Stability Measurement for Environmentally Friendly Waterless Fracturing Using Supercritical CO2 Foam
612c
CFD Modeling and Performance Evaluation of the Synhelion Absorbing Gas Solar Receiver for Process Heat at 1500°C and Beyond
112a
Emissions Control Technologies for RTI’s Non-Aqueous Solvent for Carbon Capture
View
Fuel Cells
694b
Partial Substitution of Phenol in Phenol-Formaldehyde (PF) Resin By Plant Biomass for Wood Adhesives
355d
Probing Metabolic Changes in Cancer with Raman Spectroscopy in Response to Treatment, and Validated with Mass Spectrometry
229c
Driving the Value from Digitalization
554g
Early-Stage Evaluation Procedure for CO2 Utilization Technologies at Low Technology Readiness Levels: A Case Study for Electrochemical Production of Ethylene
570d
Optimal Solvent Selection in Co-Solvent-Based Biomass Conversion Processes
680a
Bio-Based Pyrrolidone from Succinic Acid: Process Design and Life Cycle Assessment
633d
Predictive Life Cycle Assessment with Limited Training Data: Artificial Neural Networks Vs. Gaussian Process Regression
233e
Engineering of Ruthenium-Iron Oxide Colloidal Heterostructures Leads to Improved Yields in CO2 hydrogenation to Hydrocarbons
586g
Catalyst Changes at the Atomic Level Studied Using Nanocrystal Catalysts
631e
Systematic Identification of Active Site for Propene Combustion Using Pd/Pt Bimetallic Nanoparticle Catalysts and Theoretical Insights
691c
Using Atomic Layer Deposition to Understand Support Effects on Co2c Formation in ZnO-Modified Co Catalysts during Syngas Reaction
691d
Observation and Elucidation of the Bimetallic Structure of MoO3-Promoted Rh Catalysts for Syngas Conversion to Alcohols Using in-Situ xas
758c
Structure of Fe(II) Sites Situated within the Nodes of Metal-Organic Framework Materials and Their Reactivity for Low Temperature Methane to Methanol Conversion
100a
Modelling of 3D Particle-Liquid Flows Using a Data-Driven Lagrangian Stochastic Approach
380e
Experimentally Validated Numerical Lagrangian Particle Tracking Simulations in a Mechanically Agitated Solid-Liquid Suspension
380g
Quantifying Mixing in Multiphase Flows Via Lagrangian-Recurrence Tracking
513as
Bifunctional Nickel and Copper Electrocatalysts for CO2 Reduction and the Oxygen Evolution Reaction
581c
Nanoparticle-Based Growth of Chalcogenide Perovskites for Photovoltaics
337j
Ultrastretchable Conductive Polymer Complex As a Strain Sensor with a Repeatable Autonomous Self-Healing Ability
266g
Thiol-Ene Polymer Electrolytes: Polymer and Electrochemical Properties
8e
Process Development, Characterization, and Understanding in an Integrated Continuous Monoclonal Antibody Manufacturing Testbed
157aa
Process Analytical Technologies for Recombinant Adeno-Associated Virus-Based Gene Therapy
157v
A Mechanistic Analysis of Recombinant Adeno-Associated Virus Productivity in Biomanufacturing
367d
Process Control Strategy Development for an Integrated Continuous Platform for Monoclonal Antibody Manufacturing
542e
First-Principles Dynamic Simulation of an Integrated Continuous Biomanufacturing Platform
667d
Mathematical Modeling of Gene Therapy Manufacturing
271f
Meeting Unit Operations Laboratory Learning Outcomes in the Era of Covid-19
322f
Web Deployment of Mechanistic Models for Pharmaceutical Applications: Case Studies in Spray Drying and Distillation
377e
Digital Design of an End-to-End Drug Manufacturing Process Using Mechanistic Modeling
377f
Digital Design of a Dry Granulation-Based Drug Product through Integrated Manufacturing Process and Product Performance Modeling
561e
Towards a Generic Model for Twin-Screw Wet Granulation: Calibration and Validation of an Improved PBM for Multiple APIs.
617d
Adsorption Separation of Methane and Carbon Dioxide for the Production of Renewable Natural Gas Using Activated Carbons
160a
Whey Proteins and Whey Derivatives in the Production of Emulsions and Biodegradable Packaging Materials.
11e
Peptidomimetic Drugs: In Vitro, In Vivo & mechanistic Studies of 5-12mer Antimicrobial & Antiviral Peptoids to Treat Respiratory Infections
99g
Inhibiting Bacterial Surface Colonization Using Peptoid-Loaded Polyelectrolyte Microgels
182h
A Systems-Level Hypothesis for How Innate Immune System Dysregulation May Cause Alzheimer’s Dementia, and How We May be Able to Prevent It
390c
Biomimetic Drugs: In Vitro, In Vivo & mechanistic Studies of 5-12mer Antimicrobial & Antiviral Peptoids to Treat Respiratory Infections at the Airway Interface
55e
Development of an Equation Oriented Model Applied to a Hydrodesulfurization (HDS) Process
317c
Thermal Atomic Layer Deposition of Gold Nanoparticles for Catalysis: High-Precision & Scalable Production
398h
Strategies for Performance Improvement of Polyoxometalates in Non-Aqueous Redox Flow Batteries
350y
Enabling Nano-Insecticides: Biodegradable Nanoparticle Biodistribution in Aedes Aegypti Mosquitoes
312c
Automated Detection of Yeast Genetic Engineering in Whole Genomes and Metagenomes with Prymetime
513au
Unprecedented Catalytic Photoprotection with an Earth-Abundant and Non-Toxic Material
719a
Trend-Based Assessment of Industrial Rotating Equipment Health
185h
In Situ Synthesis of Nanostructures in Microfluidic Devices for Pressure-Driven Studies of Fluids in Confinement
157bn
Deep Learning-Aided Intelligent Flow Cytometry for Label-Free Cell Detection
203g
An Approach to Measurement of Volumetric Fill and Flow Rate in a Discharging Hopper Using Helmholtz Resonance
205c
Cost-Effective Technology Identification & Uncertainty Quantification of Stranded Sour Gas Desulfurization Processes
564a
Correlating Polyamide Powder Flow Properties to Mechanical and Physical Properties of 3D Printed Parts
570e
Separation and Purification of 2,5-Dimethylfuran: Process Design and Comparative TEA and Sustainability Evaluation of Advanced Adsorption and Conventional Distillation
78e
Measuring Student Academic Motivation Toward Process Safety Decision Making within a Virtual Digital Environment
471a
Spatially Explicit Optimization of Cellulosic Biofuel Supply Chains Considering Landscape Design and Biomass Yield Uncertainty
157e
Extracellular Carotenoid Production from Microalgae Under Increased CO2 Concentrations
657h
Extending the Reach of Particle-Based Simulations with Machine-Learned Models
439a
Supramolecular Soft Material Formation through Polyelectrolyte-Templated Polymerization
69a
Redesigning a First Year Introduction to Chemical Engineering Course to Integrate a Laboratory Component
View
Detection of Various Biomolecules and Targets in a Novel Electrochemical Biosensing Platform Essence
494c
Polymer Architecture Plays a Crucial Role in Structure Formation during in-Situ growth of Microgels in Mixed-Matrix Polymer-Polymer Membranes
View
AIChE K-12 Module, Grades K-2 (3) - Putting a Stop to Viruses!
346ak
General-Purpose Coarse-Grained Toughened Thermoset Model for Aerospace Composites: Workflows, Parameterization, and Validation
582c
Interconversion of Agglomerated Pd Domains and Ion-Exchanged Pd2+ in CHA Zeolite Materials for Passive NOx Adsorption
677b
Solvation of Water and Alkanols Confined within Brønsted Acid Zeolites: Kinetic Effects of Protonated Clusters and Extended Networks
714a
Ab-Initio characterization of Water Clusters at Acid Sites in Microporous Zeolites and Their Influence on Ethanol Dehydration Kinetics
33a
Pyomo.GDP: An Ecosystem for Logic-Based Modeling and Optimization Development
111f
Oxygenate Reactions over PdCu/PdAg Catalyst: Role of Synergistic Effects
738e
Mars Van Krevelen Catalytic Methane Combustion Via Formate Intermediates over Hematite: Atomistic Surface Studies and DFT
358c
Inverse Emulsion of Poly(acrylamide-co-itaconic acid) Nanoparticles for the Oral Delivery of Protein Therapeutics
29k
Polymer Informatics: Current Status & Critical Next Steps
View
ASC Keynote Address
695c
Perspectives of Solar Thermochemical Fuels for Aviation
458d
Monitoring Protein Fouling on Patterned Membranes By Light Microscopy and Simulation
158o
Phosphatidylserine Expression as a Molecular Target in Listeria monocytogenes and Escherichia coli
102g
Understanding Atomic-Scale Compositions, Structures, and Properties of Pt-Zeolite Catalysts
699c
Influence of Nanofluid Instability on Thermodynamic Properties Near the Critical Point
564e
Dispersing Nano- and Micro-Sized Portlandite Particulates Via Electrosteric Exclusion at Short Screening Lengths
99j
Interfacial Protein Self-Assembly: An "Ironic" Approach Towards Generating Antifouling Coatings
View
Investigation of Advanced Adsorbents for Removal of Excess Iron from the Body
130d
Heat Exchanger Model for Predicting Temperature and Dissolution of API for a High-Throughput Temperature Shift Spray Drying Process
130e
Advancing Spray Drying Process Capabilities for Low Solubility Drug Compounds By Leveraging Temperature-Shift Solubility Enhancement: A Case Study with Alectinib
452h
Development of Polymer Monolith Pd Catalysts for Batch, Modular Continuous Flow and Novel 3-D Printed PEEK Reactor Platforms for Hydrogenation Reactions
644b
Comparative Evaluation of Dissolution Behavior and Bioequivalence of Various Capsules
43e
Influence of Nanoparticles on the Dynamics and Clustering of Active Colloids Proximate to a Boundary
341y
Investigation of the Effect of Design Parameters and Operational Conditions on a Hollow Fiber Vacuum Membrane Distillation Module
351at
Anti-Bacterial Chitosan-Copper Supramolecular Assembly for Coating Thin-Film Composite Membranes
701a
Poly(homopiperazine-amide) Thin Film Composite Nanofiltration Membrane for Heavy Metal Ions Removal
725a
Development of Membranes with Special Wettability for a Solar-Driven Water Desalination Scheme
387b
Metal Cation-Exchanged Zeolites with the Location, State and Size of Metal Species Controlled
30e
Comprehensive Characterization of the Water-Soluble Fraction Produced from Hydrothermal Liquefaction of Food Waste
161v
Templating Hydrogels Using Fractal Flow Processing
333g
Experimental and Numerical Study of Apparent Permeability in the Utica Shale
504d
Oxidation Kinetics of Hercynite Alloys for Solar Thermochemical Fuel Production
185g
Ion Transport in Charged Nanopores
398g
Electrochemical Kinetics of Degradation of Porous Graphite Electrodes in Lithium Ion Batteries
420d
A Scaling Law to Determine Phase Morphologies during Ion Intercalation
420g
Tuning the Stability of Electrochemical Interfaces By Electron Transfer Reactions
477d
Inverse Learning of Material Physics through Image Data and Continuum Modeling
702a
Continuous Separation of Ions and Particles from Water By Shock Electrodialysis
75f
Hybrid Electro-Plasmonic Neural Stimulation and Its Implications for Prosthetic Devices
444b
Status of Women and Men in Science and Technology Professions a data-driven review
75a
Bacterial Extraction from Blood through Lysis Filtration and Subsequent Removal from Filter
472g
Tuning the Composition of Silicon Oxide Overlayers to Control the Performance of Platinum Electrocatalysts
View
Conductive Poly(vinyl alcohol)/Multi-Walled Carbon Nanotube Nanocomposite Fiber Electrodes for Lightweight and Energy Dense Supercapacitor Applications
579d
Recovery Options for Iron and Sulphur Produced during Nickel Extraction from (bio)Leaching of Pyrrhotite Tailings
340t
Process Data Analytics and Representation Learning to Predict Arc Loss in an Electric Furnace
758c
Structure of Fe(II) Sites Situated within the Nodes of Metal-Organic Framework Materials and Their Reactivity for Low Temperature Methane to Methanol Conversion
346bu
Understanding the Homogeneous Ice Nucleation Process for Different Ice Polymorphs
346r
Discovery of Chemical Descriptors/Features in Predicting Protein-Ligand Binding Properties Using 3D Convolutional Neural Network
229d
Combining AI with Chemical Engineering First Principles Will Take Process Performance, Safety and Sustainability to New Levels
722d
Electrolyte Thermodynamics (EleTher JIP) : An Industrial Community for Developing a Best Practices Workflow
633d
Predictive Life Cycle Assessment with Limited Training Data: Artificial Neural Networks Vs. Gaussian Process Regression
50a
A Tuneable Process for the Conversion of Lignin to Jet Fuel over Molybdenum Carbide Catalysts
178b
A Heterogeneous System for Alkane Rearrangement: A Means to Depolymerize Polyethylene at Low Temperature (< 200°C)
357d
Developing a High-Throughput Reductive Catalytic Fractionation Method for Lignin Characterization in the Genome Wide Association Study of Poplar
437e
Mesoscale Reaction‐Diffusion Phenomena Governing Lignin‐First Biomass Fractionation
455e
Alkaline Oxidation of Lignin Using Reversibly-Soluble Bases
664d
Recent Advances in Plastics Upcycling
689c
Upcycling Waste Polyesters to Polymers for Additive Manufacturing
161i
Microcapsule-Based Self-Healing in High Impact Polystyrene Composites for Additive Manufacturing
161q
Transport Behavior of Polyether-Based Cation Exchange Membranes to Acetate in Co-Permeation with Methanol
351d
Comonomer Effects on Co-Permeation of Methanol and Acetate in Cation Exchange Membranes
352z
Tracking of Thiol/Epoxy-Based Crosslinking Kinetics Via Differential Scanning Calorimetry and Low-Field 1h NMR Spectroscopy
551g
Thermodynamic Mixing Rules for Block-Random Copolymers
565f
3D-Printing of Self-Healing Polymer Composites
587f
Transport Behavior of Crosslinked PEGDA Membranes to Methanol and Sodium Acetate
265e
Combustion Products from Thermal Treatment of Polymers Containing per- and Poly-Fluoroalkyl Substances
3eg
Engaging the Student Experiences of Rural Students in Chemical Engineering
7b
Long-Term Calibration Models to Predict Ozone Levels with a Metal Oxide Sensor
126h
Compositions, Structures, and Properties of Mesoporous-Fe,N-Containing Carbon Materials for Oxygen- and Sulfur-Reduction Electrocatalysts
347n
Removal of Metal Ions from Wastewater By Surface Activated Carbon Microsphere
635d
A New Methodology for Quantitative and Temporal Measurement of Autophagy.
535b
Heat Transfer in Clustered Gas-Solids Flows
16g
Molecular Modeling to Aid the Separation of Azeotropic Mixtures of High Global Warming Potential Hydrofluorocarbon Refrigerants Using Ionic Liquids
479g
Process Design Under Uncertainty for Novel Separations of Azeotropic High Global Warming Potential Hydrofluorocarbon Refrigerants Using Ionic Liquids
514a
Project Earth: Environmentally Applied Research Towards Hydrofluorocarbons
697c
Physical Property Prediction with Atomistic Simulations: What Might the Future Hold?
511b
Solar Pyrolysis Production of Self-Activated Bio-Derived Carbons for Supercapacitors
347o
Adsorption Characteristics of Hexavalent Chromium from Aqueous Solution Onto Biochars
349f
Characterization of the Polarizability of Metallodielectric Janus Particles and Its Relationship to Active Motion
425c
Acoustic Streaming Flows in Non-Newtonian Fluids: The Effect of Vibrating Objects and Fluid Types on the Flow Pattern.
519d
Numerical Simulation of the Extrusion Process in Fused Deposition Modeling: The Effects of Process Variables on the Pressure Drop in the Nozzle
646g
Industrial Scale Downstream Process Development for Low Concentration Amino Acid Product Using PAT
342e
Friction Theory & Free Volume Theory Coupled with Artificial Intelligence Algorithms to Estimate the Viscosity of Crude Oils
348d
Linking Microstructure of Membranes and Performance
553e
Multilayer Coextruded Polyolefin Films Improve Processability and Reduce Flammability
125d
Modeling the Size-Dependent Stacking Dynamics of Graphene Particles at a Water-Vapor Interface
257h
Ultrafast Relaxation Dynamics in Bimetallic Plasmonic Catalysts
126c
The Importance of Activation Barriers in Designing Optimal Active Sites for the Oxygen Evolution Reaction
731a
Catalytic Pyrolysis of Waste Automobile Tires to Low Sulfur Fuels
720b
Advanced Robust Catalysts for Producing Stable Biomass Pyrolysis Oils for Upgrading to Hydrocarbon Fuels
429c
A Cell-Free Pipeline for Rapidly Imprinting Complex Methylation Patterns on DNA to Enhance Plasmid Transformation in Bacteria (Industry Candidate)
230h
Synthesis and Characterization of Bactericide Activity of Cellulose Acetate Asymmetric NF Composite Membranes with Silver Nanoparticles and Silver Ion Exchanged Zeolite
650f
A Voyage in PHA Chemical Space to Design Bio-Advantaged Functional Polymers
506e
All for One and One for All Research: Moringa Oleifera Lam. in Food, Health and Environmental Applications
165i
Toxicity of Magnetic Nanocomposites Using Zebrafish As a Biological Model
154d
Kaya Identity analysis for Central Asia
440j
Rational Design of Capacitive Pressure Sensors Based on Material Properties and Architecture of Pyramidal Microstructures
94a
'Transitioning from Graduate School to Your Future' panel discussion
296f
Apohemoglobin Haptoglobin Complexes Attenuate the Hypertensive Response to Low Molecular Weight Polymerized Hemoglobin
298a
Exploring the Potential Role of Hemoglobin-Based O2 Carriers in a Pandemic Simulation of the Blood Supply Chain
533f
Polymerized Hemoglobin Facilitated Modulation of Tumor Oxygenation Is Dependent on Tumor Oxygenation Status and Oxygen Affinity of the Hemoglobin-Based Oxygen Carrier
3ch
Accelerating the Design, Development, and Implementation of Therapeutics and Materials for Diseases with Urgent Unmet Clinical Needs
731b
Probabilistic Analysis of Converting Marine-Borne Plastics into Usable Fuels
124d
Membrane Filtration with Liquids: A Global Approach with Prior Successes, New Developments and Unresolved Challenges
217d
Membrane Selectivity for Protein Filtration Probed By Atomic Force Microscopy
348d
Linking Microstructure of Membranes and Performance
379a
How Does Membrane Microstructure Affect Performance?
421e
SET-LRP Modification of Cross-Linked Polyimide Membranes for Organic Solvent Nanofiltration
627f
Engineering a Cell-Free System- Enzyme Fusion for Enhanced Production (Industry Candidate)
627f
Engineering a Cell-Free System- Enzyme Fusion for Enhanced Production (Industry Candidate)
62h
Multiscale Modeling of Membrane Electrode Assemblies (MEAs) for Vapor-Fed Electrochemical Reduction of CO2
111c
Theoretical Analysis of the Periodic Trends in the Aldol Condensation of Acetaldehyde over Isolated Metal Sites
111e
Computational Analysis of Kinetics of Ketonization and Aldol Condensation on Isolated Zirconium Sites
175e
Ethanol Conversion to Butadiene over Isolated Zinc and Yttrium Sites in Dealuminated Beta Zeolite
175g
Kinetic and Mechanism of Acetone Conversion to Isobutene over Hf/Silicalite-1 and Hf/SiO2
186e
Vapor-Fed Membrane Electrode Assemblies for Electrochemical Oxidation
403a
High-Throughput Approach to Studying Adsorption on Zeolite Surfaces
582a
Investigation of Passive NOx Storage on Pd/CHA: Effect of Water and Other Co-Adsorbates
582d
Computational Study of Active Site Structure and NOx Storage in Pd-Exchanged Zeolites
758f
Propane Dehydrogenation over Zn-Exchanged H-MFI Zeolites
747a
State-of-the-Art in Process Enthalpy and Free Energy Calculations
View
AIChE K-12 Module, Grades 9-12 (2) - Heron's Fountain at Home
643c
Novel Catalytic Chemical Looping Process Technology for Utilization of CO2 for Acrylonitrile Production
52g
A Unifying Biomaterial for Constructing Chimeric Ex Vivo Neurovascular Tissue Structures
431f
Parameter Sensitivity Analysis of a High-Shear Wet Granulation Model for Experimental Design and Parameter Estimation.
157r
Analyzing the Role of Chinese Hamster Ovary Extracellular Vesicles (CHO-EVs) in Extracellular Communication, Cellular State, and Protein Expression of CHO Cultures
760b
Bioethanol Production with Carbon, Capture and Storage: Potential As a Carbon-Negative Biofuel and Environmental Implications
120h
Mesoscale Simulation Approach for Dynamics and Assembly of Deformable Objects
566d
Hydrocarbon Recovery Using Ultra-Microporous Fluorinated MOF Platform Structure Properties Relationships for C2H2/C2H4 and C4 Olefins Separation Separations
334c
Understanding Second-Shell Catalyst Interactions for Enhancing the Performance of Arylborane-Catalyzed Epoxide Ring-Opening
653c
Strong Influence of the Nucleophile on the Rate and Selectivity of 1,2-Epoxyoctane Ring-Opening Catalyzed By Tris(pentafluorophenyl)Borane
704a
Increasing the Selectivity of B(C6F5)3-Catalyzed Epoxide Ring-Opening Using Hydrogen Bonding
197c
Fabrication and Characterization of Free-Standing Asymmetric Membranes
572d
Delivery of CRISPR/Cas9 Gene-Editing Systems By Cell-Penetrating Magnetite Vehicles: Synthesis, Characterization and in Vitro Testing
441d
Releases Estimation and Impact Assessment of a Novel Feedstock Biorefinery
161aq
Computational Reverse-Engineering Analysis for Scattering Experiments (CREASE) on Amphiphilic Block Polymer Solutions
513bm
Nonoxidative Methane Conversion with C5-Hydrocarbons of Different Classes
167g
Effect of an Antioxidant on the Gas-Phase Reactivity:an Experimental Study of 2,4-xylenol
295c
In-Situ Liquid Phase Electron Microscopy for Studying the Dynamics of Colloidal Nanoparticles at the Nanoscale
View
A Zinc-Based Alloy Anode Approach for Suppressing Hydrogen Evolution in Aqueous Battery Anodes
510a
Turbulent Flows of Complex Fluids
602f
Investigating the Impact of Texture Modifiers on the Flow Properties of Cosmetic and Personal Care Formulations
538g
Highly Selective Canal Ladder Polymers for Gas Separations: Tuning Backbone Conformation and Alkyl Functionalities
3k
Preserving the Exposed Facets Reveals the Higher Activity of Disordered Pt3sn Nanocubes Towards Electro-Reduction and Oxidation Reactions Compared to Ordered Counterparts
598g
The Counterintuitive Dependency of Bifunctional Effect on the Degree of Ordering in Alloy Electrocatalysts for Methanol Oxidation Reaction
670b
A New Noninvasive Method for Measuring the Size Distribution of Lung Metastases Vs Time in a Mouse Breast Cancer Model As an Input into a Mathematical Model of Tumor Size Evolution
423a
New Developments in Polybenzimidazole (PBI) Membranes for Electrochemical Devices
182i
Multi‐“Color” Delineation of Bone Microdamages Using Ligand‐Directed Sub‐5 Nm Hafnia Nanodots and Photon Counting CT Imaging
718g
On a Systematic Approach to Simultaneously Integrate Water and Energy Utilities in Multi-Product Biorefineries
334c
Understanding Second-Shell Catalyst Interactions for Enhancing the Performance of Arylborane-Catalyzed Epoxide Ring-Opening
653c
Strong Influence of the Nucleophile on the Rate and Selectivity of 1,2-Epoxyoctane Ring-Opening Catalyzed By Tris(pentafluorophenyl)Borane
704a
Increasing the Selectivity of B(C6F5)3-Catalyzed Epoxide Ring-Opening Using Hydrogen Bonding
67f
Latest Advancements in Midstream Technologies
112c
Optimization and Transport of CO2 from Refineries in Southeast Texas for Offshore Subsea Storage
148f
Development of Mean Ionic Activity Coefficients for Modification of the Krichevsky – Ilinskeya Equation for Methylimidazolim – Type Ionic Liquids
514j
Sustainable Treatment of Produced Water Using Algae
135e
Atomic Layer Deposition of Metal Oxides for More Stable Operation of Perovskite Solar Cells
691c
Using Atomic Layer Deposition to Understand Support Effects on Co2c Formation in ZnO-Modified Co Catalysts during Syngas Reaction
691d
Observation and Elucidation of the Bimetallic Structure of MoO3-Promoted Rh Catalysts for Syngas Conversion to Alcohols Using in-Situ xas
429f
Electrogenetic Design for Bidirectional Communication at a Bioelectronics Interface
281g
High-Performance Base Oils with Unique Branching Structure through Hydroisomerization of Paraffinic Feedstocks
304f
Influence of Hydrodynamics on BaSO4 Scale Deposition Kinetics on Steel Surfaces
189b
Simulating the Formation of Granular Jets
231b
A Simple Fix Addresses Severe Density Functional Theory Polymorph Ranking Problems in Pharmaceuticals
351bc
Carbon Molecular Sieve Hollow Fiber Membranes for High Purity Oxygen Production
437b
Effects of Hydrophilicity on Aldol Condensation and Esterification Reactions of Acetaldehyde and Ethanol over Ti-BEA Catalysts
577b
Discovering Molecules with Selective Membrane Partitioning Using Active Learning and Alchemical Transformation
6b
Homogeneous Megamolecules for Targeting Heterogeneity in Breast Cancer
527f
Relationship between Structural Properties and Self-Diffusion of Molecular Mixtures in Nafion By High Field Diffusion NMR in Combination with SANS and SAXS
439a
Supramolecular Soft Material Formation through Polyelectrolyte-Templated Polymerization
747a
State-of-the-Art in Process Enthalpy and Free Energy Calculations
458b
Conductive Antifouling Membranes: Preserving Nanoscale Features in Polymers during Laser-Induced Graphene Formation
View
Investigation of Advanced Adsorbents for Removal of Excess Iron from the Body
126h
Compositions, Structures, and Properties of Mesoporous-Fe,N-Containing Carbon Materials for Oxygen- and Sulfur-Reduction Electrocatalysts
705h
Low-Temperature Activity and Initiation in Reduced Supported Mo and W Olefin Metathesis Catalysts
714d
Framework Structures and Heteroatom Distributions in the Zeolite Catalyst SSZ-70
View
AIChE K-12 Module, Grades K-2 (5) - Polymer Bouncy Balls
177e
Deep Learning for Probabilistic Uncertainty Quantification of an Integrated Biomanufacturing System for Martian Colonization
224a
Data-Efficient Probabilistic Model Learning with Embedded High-Fidelity Knowledge for Biomanufacturing in Deep Space Manned Missions
436b
A Systems Engineering Approach to Biomanufacturing for Long-Duration Missions on Mars
534f
Combinatorial Chimeragenesis of Novel Lysins to Treat Antibiotic Resistant Infections
483h
Liposomal Encapsulation of Therapeutic Nanobioconjugates Enabled By Microfluidic Devices: In silico Analysis Via Comsol Multiphysics
3bk
Modern Computational Approaches to Nonlinear Discrete Optimization and Their Application to Process Systems Engineering
33a
Pyomo.GDP: An Ecosystem for Logic-Based Modeling and Optimization Development
173d
Pyosyn Graph: New Representation and Systematic Generation
177f
Use of Quantum Computing to Solve Optimization Problems in Process Systems Engineering
280b
Sample Average Approximation for Stochastic Nonconvex Mixed Integer Nonlinear Programming Via Outer Approximation
415g
Thermodynamic Properties of (N,K)-a-S-H Gels for Radioactive Waste Solidification
577i
Computational Modeling of Therapeutic Glycoproteins
489e
Conformationally Bioactive Bovine Serum Albumin As a Biomolecule in Tissue Engineering (Industry Candidate)
45a
Discovery of Light-Driven Hydrogen Evolution Catalysts Using High Throughput Simulation, Experiments and Machine Learning
View
Exploring New Sources of Silk Fibroin for Biomaterials Applications
184b
CFD Modelling of Thermal and Hydraulic Characteristics of a Rotating Packed Bed Reactor Used for CO2 Capture
135e
Atomic Layer Deposition of Metal Oxides for More Stable Operation of Perovskite Solar Cells
207a
Introductions of Panelists
22a
Investigating SERS of Electrogenic Bacteria Via Charge Transfer Enhancement By Graphene Quantum Dots (GQDs)
62f
Mechanistic Insight into CO2 Electroreduction over Single-Atom Catalyst Platform Via Operando Infrared Spectroscopy
321d
Graphene and MoS2 Gel for Aligned 3D Printing for Electronic and Mechanical Analysis
330i
Interfaceof Electrogenic Bacteria and Reduced Grapheneoxide: Energetics and Electron Transport
405b
Local Curvature Enables Spatially-Defined Properties in Graphene
565b
Electron Tunneling and Mechanical Compression of Aligned 3D Printed Structures of Graphene and MoS2/BN Gel
360b
Self-Organized Protein Arrays Guided By DNA Origami Lattices
46a
Dynamical-Systems-Guided Learning of PDEs from Data
299h
PDE+Pinn: Neural Identification and Solution of Partial Differential Equations on Partial Data
402g
Connections between Residual Networks and Explicit Numerical Integrators, with Applications to Identification of Noninvertible Dynamical Systems
470f
Learning the Dynamics of Coupled Oscillator Systems through the Discovery of Emergent PDEs Via Artificial Neural Networks and Manifold Learning
661f
On the Data-Driven Discovery and Calibration of Closures
752d
Simultaneous Extraction and Controlled Chemical Modification of Lignin from Hardwood
166e
Photothermal and Immunomodulatory Nanomaterials for Tissue Repair
292a
Temporal Delivery of Polypeptide Nanoparticles for Accelerated Wound Healing and Tissue Repair (Award Session)
334by
Photothermal and Immunomodulatory Nanomaterials for Rapid Tissue Repair and Wound Healing
622f
Temporal Delivery of Polypeptide Nanoparticles for Accelerated Wound Healing and Tissue Repair
534c
Chemical Biology Tools for Identification of Siglec Ligands in Cancer
47b
The Lake Michigan Ozone Study (LMOS 2017) Field Campaign and Ozone Control Strategy from It
380b
A Comparison of the Performance of Mixing Systems for Viscous Solid-Liquid Mixing Using CFD-DEM
271g
Got Water? : A Filtration Experiment for the Material and Energy Balance Course
627d
Laying the Foundation for Performing Drug Discovery on the Yeast Surface
424d
Shikimate Pathway Refactoring in the Non-Conventional Yeast Kluyveromyces Marxianus Enables High Titer Production of 2-Phenylethanol
443g
Phase Transitions of Water Confined in Nanopores
653h
Temporal Analysis of Products Study of Ethanol Dehydrogenation As a Decisive Reaction Step for Iso-Butanol Production
111e
Computational Analysis of Kinetics of Ketonization and Aldol Condensation on Isolated Zirconium Sites
View
Photocurable Poly(ethylene glycol) Diacrylate Resins with Variable Loadings of Functionalized Silica Nanoparticles
3cn
At the Interface of Ab-Initio Modeling and Data Analytics: A Hybrid Approach to Process Design, Control, and Optimization
339f
Data-Driven Optimization of Integrated Planning and Scheduling Problems Under Demand Uncertainty
339m
Modeling the Impact of Environmental Toxicants on the Estrogen Receptor Using Combined Image-Analysis, Big-Data Analytics, and Machine-Learning
166q
Fabrication of Polyelectrolyte-Surfactant Nanoparticles in T-Sensor Type Microfluidic Chips
407f
Monitoring Loss-in-Weight Pharmaceutical Feeders through State Estimation
334c
Understanding Second-Shell Catalyst Interactions for Enhancing the Performance of Arylborane-Catalyzed Epoxide Ring-Opening
653c
Strong Influence of the Nucleophile on the Rate and Selectivity of 1,2-Epoxyoctane Ring-Opening Catalyzed By Tris(pentafluorophenyl)Borane
704a
Increasing the Selectivity of B(C6F5)3-Catalyzed Epoxide Ring-Opening Using Hydrogen Bonding
564e
Dispersing Nano- and Micro-Sized Portlandite Particulates Via Electrosteric Exclusion at Short Screening Lengths
195a
Towards the Development of Digital Twin Framework for Continuous Pharmaceutical Manufacturing: Real-Time Model Maintenance and System Analyses
334ap
Dynamic Process Modeling and System Analyses for Continuous Pharmaceutical Manufacturing
377b
A Multi-Scale Hybrid Modeling Approach for Continuous Pharmaceutical Unit Operations
712e
Critical Role of Dispersive Transport during Absorptive Hydrogen Removal for Enhanced Aromatics Yield in Methane Dehydroaromatization on Mo/H-ZSM-5 Catalysts
712g
Tuning Ethylene-to-Propylene Ratio in Methanol-to-Olefins Conversion on Window-Cage Type Zeolites
758c
Structure of Fe(II) Sites Situated within the Nodes of Metal-Organic Framework Materials and Their Reactivity for Low Temperature Methane to Methanol Conversion
489f
Exploring Sequence-Function Space of a Template-Independent DNA Polymerase for DNA Data Storage and Biorecording Applications
399b
Design of Optimal Multi-Size Proppant Pumping Schedule to Enhance Shale Gas Production
545c
Modeling, Simulation and Design Strategies to Efficiently Apply Preferential Crystallization in a Continuous Process
136c
Size-Focused Growth of Indium Phosphide Nanocrystals By Tuning Precursor Reactivity
43d
Active Propulsion of Patchy Ellipsoids
53j
Adsorption of Myoglobin on Silica Nanoparticles
105h
Disordering Colloidal Crystals and Directing Structural Color
183h
Assembly and Reconfiguration of Clusters Formed By Isotropic and Anisotropic Colloids
473h
Self-Assembly and Foaming in Mixtures of Fatty Acid and Silica Nanoparticles
474a
Adsorption of Gold Nanospheres in Cylindrical Pores of SBA-15: From Packing to Catalytic Response
557e
Magnetostatic Convection for Overwriting Coffee-Ring Effect
557g
Reshaping Drying Droplets Using Rod-Shaped Particles
270f
Interactions of Proppant with Dynamically Complexing, pH-Responsive Viscosity Modifying Agents for Hydraulic Fracture Fluids
308f
Proppant Transport with a Reversible and pH Adjustable Supramolecular Material Used As Viscous Fracturing Fluid
308g
Dynamic Binary Complexes As Super-Adjustable Viscosity Modifiers for Hydraulic Fracturing Fluids
515d
Novel pH-Switchable Viscosity Modifiers to Improve Rheology and Cost Efficiency of Hydraulic Fracturing Fluids
378e
Numerical Simulation of Bubble Growth and Collapse in a Pool of Liquid
453f
Novel Porous Ternary Mg-Al-Ti Oxide Composite Nano-Adsorbents with Extremely High Arsenic Removal Capacity
477k
Interpretable Model for Molecular Data Fusion
View
Saw Dust Derived Activated Carbon in Different Impregnation Ratio and Its Application in De-Fluoridation of Waste Water Using Soft Computing Techniques.
110a
A Hysteretic Nonlinear Elastoplastic Contact Model for Discrete Element Modeling of Milled Woody Biomass
517d
Effects of Preprocessing Parameters on Material Attributes and Flow Behavior of Loblolly Pine
737b
Population Balance of Hammer Milled Loblolly Pine in ‘Once-through’ and ‘Fractional Milling’ Configurations
541h
A Flexible, Open-Source Framework for Data Reconciliation, Parameter Estimation, and Optimizing Operation: Application to Power Plants
17c
Nonlinear State and Parameter Estimation for Differential-Algebraic Equation Systems with Uncertain Algebraic Equations and Unknown Noise Covariance
46g
Reinforcement Learning Augmented Model Predictive Control with Fuzzy Subtractive Clustering and Fuzzy Cognitive Mapping
112d
Dynamic Modeling, Optimization, and Control Studies of a Moving Bed Process for CO2 Capture Using a Micro-Encapsulated Solvent
147d
Dynamic Data Reconciliation, Parameter Estimation, and Plant-Wide Modeling of a Microwave (MW)-Assisted Direct Non-Oxidative Methane Dehydroaromatization (DHA) Process
181a
Multiscale Modeling and Optimization of Wet Flue Gas Desulfurization
181b
Optimal Load-Following Operation of Natural Gas Combined Cycle (NGCC) Power Plants with Quantified Uncertainty of Equipment Health
181c
A Decision Framework for Integrating Energy Storage with Power Plants: Technology Selection, Design and Optimization
181f
Dynamic Modeling, Validation and Optimization of a Solvent-Based CO2 Capture Process Under Flexible Operation
192f
Multi Objective Optimization of a Photo-Catalytic CO2 Utilization Process
287a
Dynamic Data Reconciliation, Parameter Estimation, and Validation for the Dynamic Model of a Supercritical Pulverized Coal Power Plant
341b
Design of Experiments and Uncertainty Quantification for Adsorptive CO2 Capture Systems
342m
Development of a Multi-Scale Model with Quantified Uncertainty for a Chemical Looping Process
375c
Optimal Sensor Network Design and Nonlinear State Estimation for in-Situ Corrosion Monitoring in Coal-Fired Boilers
384b
A Combined Experimental and Modeling Study of Thermal and Non-Thermal Effects of Microwave-Assisted Direct Natural Gas Conversion to Value -Added Chemicals
399d
Development of Condition Monitoring and Prognostic Capabilities for a Vanadium Redox Flow Battery
430b
Microwave-Assisted Methane Conversion on High Microwave-Sensitive Catalysts
430e
Thermal-Microwave Hybrid Reactor Configuration for Energy Efficient Production of Aromatics from Natural Gas
461e
Identifying Optimal Kinetic Pathways of a Functionalized Solid Sorbent for CO2 Capture through Mathematical Programming
471i
Dynamic Optimization of Li-Ion Battery Systems for Grid-Connected High Current Density Operation
501a
A Systems Engineering Approach to the Optimal Measurement Network Design in Coal-Fired Power Plants By Incorporating Market Elasticity
541h
A Flexible, Open-Source Framework for Data Reconciliation, Parameter Estimation, and Optimizing Operation: Application to Power Plants
554e
Modeling and Optimization of High-Temperature Thermal Storage (HTTS) Integrated with Fossil-Fueled Power Plants
562c
Catalytic Materials and Process Development for Microwave-Assisted Ammonia Synthesis
617f
Modeling and Techno-Economic Optimization of a Rotary Packed Bed for Post-Combustion CO2 Capture Using a Diamine-Appended Metal-Organic Framework
643a
Multi-Objective Optimization of an Electrochemical CO2 Utilization Process
674d
Development of a Hybrid First Principles – Artificial Intelligence Approach for Dynamic Modeling of Complex Systems
707f
Multi Objective Optimization of a Photo Catalytic CO2 Utilization Process
717c
Optimal Dispatch of Energy Systems Considering Penetration of Renewables and Power Plant Health
719g
Monitoring the Stress and Oxide Layer Evolution Profile in a Supercritical Pulverized Coal Boiler
732e
Process Modeling and Techno-Economic Analysis of a Diamine-Appended Metal–Organic Framework for CO2 Capture
734a
Direct Non-Oxidative Conversion of Shale Gas to Aromatics: Dynamic Data Reconciliation, Parameter Estimation, and Dynamic Modeling of a Fixed-Bed Reactor
View
Estimating Interaction Energy of Organic Solvents in Water to Predict the Polymorphic Outcome of Curcumin during Liquid Antisolvent Precipitation
367e
Modulating Antibody Glycosylation Using Traditional and PAT Methods
75f
Hybrid Electro-Plasmonic Neural Stimulation and Its Implications for Prosthetic Devices
88f
Point-of-Care Cancer Biomarker Detection System Integrating Surface Acoustic Wave Streaming and Metal-Enhanced Fluorescence
152d
Acoustic Wave Sensor Based on Plasticized Polymer Films for Detection of BTEX Compounds in Air
160d
Degradable Catechin Particles As an Effective Antioxidant Material
337c
Point-of-Care Fungal Pathogen Identification Using Surface Acoustic Waves Coupled with Metal-Enhanced Fluorescence
378a
Acoustic Streaming in Second Order Fluids
513ak
SiO2 Supported La0.5Ba0.5FeO3 Composite Pellets for Low-Temperature Thermochemical Conversion of Carbon Dioxide
519a
An Additive Manufacturing Process for Producing Integrated Optoelectronic Flexible Electronics
689e
Numerical Modeling of a Fused Deposition Modeled Embedded Polymer Fiber in a Micro-Dispensed Cladding for Optical Fiber Interconnects
171c
Metal Oxide Based Solar Driven Thermochemical Water Splitting Cycle: Solar Reactor Efficiency Analysis
370c
Solar Fuel Production from H2o/CO2 Via Zr-Doped Ceria Based Thermochemical Cycles
513an
Thermochemical Conversion of CO2 Using Doped Ceria Materials
568e
Solar Thermochemical H2O/CO2 Splitting Cycle Using Ferrites
643h
Catalytic Conversion of CO2 into Solar Fuels Via Thermochemical Cycle Driven By La-Based Perovskites
706g
Solar Driven Iron Oxide Based Thermochemical Methane Reforming and Water Splitting for H2 and Syngas Production
34e
Integration of Modular Processing in Supply Chain Optimization
162ae
Mechanical and Thermal Properties of Electrospuned Polycaprolactone Nanofibers for Regeneration of ACL
350aa
Implementation and verification of numerical solution of the bivariate population balance equation in a finite-element open-source framework
166s
Structure and Dynamic Property of Electric Double Layer in Ionic-Liquid-Gated Transistor: The Anatomy of Enhanced Gating Performance
302e
Torrefaction of Biomass Residues in Pulsating Fluidized Beds for Pellet Production
431b
Understanding AUTO-Agglomeration of Dry ACTIVE Pharmaceutical Ingredients
197j
Investigating the Role of Calcium on Coronavirus Fusion with Host Cells
8a
Pre-Clinical Manufacturing and Process Intensification of a Subunit Vaccine for COVID-19 (Faculty Candidate)
33d
Toward Large-Scale Nonlinear Parameter Estimation with Mixed Effect Models
33g
High-Performance, Scalable Nonlinear Programming Algorithms with Pynumero and Pyomo
56c
Combined Heat and Mass Exchange Networks Synthesis Using a Hybrid Trust-Region Optimization Approach Including Optimal Detailed Unit Design
181a
Multiscale Modeling and Optimization of Wet Flue Gas Desulfurization
218f
Reactor Network Development for Multiple Rigid Polyol Productions
541c
Optimization of Chlorobenzene Process with High-Fidelity Reactor Models Under Trust Region Strategies
541e
An Mpcc Approach to Robust Optimal Sizing of Thermal Energy Storage with Bidirectional Flows
596a
Nonlinear Programming Strategies for Optimization of Dynamic Chemical Looping Reactor Models
603b
Recent Advances in Kinetic Parameter Estimation Toolkit (KIPET) with Spectra
716e
A First Principles Based Dae Model for Phase Change Heat Exchangers for Process Optimization
743e
Optimization of Syngas to Olefin (STO) Reactors Under Model Uncertainty
745c
Real-Time Optimization of a Reduced-Order Residue Fluidized Catalytic Cracker Model with Trust Region Method
466a
Matrix Rigidity Modulates Histone H3 Modifications during Epithelial-Mesenchymal Transition
157q
Cycling Aggregation and Planar Culture Extends in Vitro Expansion Potential of Human Mesenchymal Stem Cells
521a
Enhanced Selective Adsorption Desulfurization on CO2 and Steam Treated Activated Carbons: Equilibria and Kinetics
418b
The Effect of Step-Down Pressure and Wettability on Pressure-Driven Bubble Nucleation for Dissolved Gas Separation
88g
High-Throughput Quantification of Influenza A Virus RNA Using Novel Drop-Based qRT-PCR Analysis
69e
Some Reflections upon Project-Based Learning in a Traditional Fluid Mechanics Course at Njit
249c
A Semi-Theoretical Model for Simulating the Temporal Evolution of Moisture-Temperature during Industrial Fluidized Bed Granulation
261h
Mathematical Modeling of Continuous Milling Processes Using a Cell-Based PBM Approach: A Parametric Study
645a
Hybrid Nanocrystal-Amorphous Solid Dispersions (HyNASDs): A New Class of Materials for Bioavailability Enhancement of Poorly Soluble Drugs
272c
HTL and HTL upgrading process for a variety of wet waste feedstocks
185i
Fast Ion Diffusion in Carbon Nanotube Channels
385c
Swimming with Swirl in a Viscoelastic Fluid
668a
Gelpins: A New Strategy for Discrete Yet Cohesive Tissue Assemblies within ‘Cut & Assemble’ Organ-Chips
37d
Influence of Dissolved Carbon Dioxide on the Viscosity of Di-Isodecyl Phthalate
121c
A Scalable Membrane Pervaporation Approach for Continuous Flow Ring Closing Metathesis
579a
Circular Economy Systems Engineering: A Case Study on the Coffee Supply Chain
259d
Lanthanide Precipitation from Spent Ni-MH Battery Leachates: Kinetic Study and Phase Identification
644e
Influence of External Lubricants and the Environmental Conditions on the Puncturing Properties of Gelatin and HPMC Capsules for Inhalation
55e
Development of an Equation Oriented Model Applied to a Hydrodesulfurization (HDS) Process
235c
Novel Modular Design and Optimization Framework for Intensified Membrane Reactor Systems
341x
Development of an Equation Oriented Simulation Module for the Generation of Oil Lumps from Distillation Curves
55e
Development of an Equation Oriented Model Applied to a Hydrodesulfurization (HDS) Process
195c
Development of a Joint Infrastructure for Chemical Engineering Applications Related to Industry 4.0 and Digital Transformation
341x
Development of an Equation Oriented Simulation Module for the Generation of Oil Lumps from Distillation Curves
357h
Extraction and Characterization of Sodium Alginate Extract from Sargassum Natans
357h
Extraction and Characterization of Sodium Alginate Extract from Sargassum Natans
88c
Molecular Engineering of a Colorimetric Nanogel Sensor for Clinical Radiotherapy and Trauma Monitoring
334ax
Nucleation and Early Stage Growth of Lithium Electrodeposits
541d
Handling a Class of Non-Convexities in MINLP for Utility Optimization
148b
An Improved Method for Predicting Autoignition Temperatures Based on First Principles
629e
A Nicotinamide Mononucleotide (NMN+)-Dependent Redox Cofactor Cycling System Enables Aldehyde Accumulation in Escherichia coli
46e
Long-Term Hybrid AI-Expert Combustion Optimization System for Coal-Fired Electricity Generation NOx Reduction
108d
Comparison of State-of-the-Art Dynamic Machine Learning Methods for MPC of Coal-Fired Utility Generator Performance
596f
Machine Learning Based Real-Time Optimization of Multi-Cell Industrial Evaporative Cooling Tower
687a
Comparison of Dynamic and Steady-State Machine Learning Based Optimization of a Coal-Fired Boiler
99h
Fabrication of Oil-Infused Anti-Biofouling Coatings on the Surfaces of Flexible Polymer Tubing
127f
CO2 Electroreduction on Modified Cu Catalysts: Using Subsurface Dopants to Enhance Catalytic Performance
445c
Convection-Driven Intravascular Bioartificial Pancreas (iBAP) Enhances Solute Delivery to Macroencapsulated Human Islets.
380b
A Comparison of the Performance of Mixing Systems for Viscous Solid-Liquid Mixing Using CFD-DEM
364b
Exploring the Catalytic Combustion Mechanism of Hydroxylammonium Nitrate Using Rmg-Cat
123c
Bench- and Pilot-Scale Modular Pyrolysis Units to Derisk Process and Unit Operation Scale-up
475a
Hybrid Membrane-PSA System for Efficient Oxygen Generation for Transportable, Modular Gasification Systems
486g
Pilot-Scale Demonstration of Coal Waste and Torrefied Municipal Solid Mixtures with an Entrained Flow Gasifier
109e
Physics Informed Machine-Learning for Static Security Analysis of Optimal Power Flow Solutions
313d
A Comprehensive Hydrodynamic Assessment of an Agitated Fermenter
182b
Bacterial Separation from Blood through Sedimentational Clotting
23a
Post-Formulation 64-Cu Labeled Nanotracers to Investigate Size and Surface Property Effects on Biodistribution and Tumor Localization in a Mouse Pancreatic Cancer Model
View
Everything You Always Wanted to know about Being a STEM Ambassador
32d
Use of Schizophrenic Diblock-Copolymer-Functionalized Silica Particles As Thermoresponsive Emulsifiers
513ds
Pressure Drop and Conversion in Catalytic Particulate Filters Depending on the Washcoat Distribution
324c
Zwitterionic Hydrogels Modified By Gel-Liquid Interfacial Polymerization with Improved Water/Salt Selectivity
28c
Semi-Crystalline Polymer Dissolution, Recrystallization, and Morphology Response to Solvent Vapor Treatment
106f
Active-Learning Framework for the Discovery of Novel Materials for Catalysis
210e
Rapid Screening Platform for the Isotopic Determination of Radionuclides in Water
235f
A Surrogate Optimization Algorithm for Red Wine Reactor Simulation-Based Design
253d
Application of Robust Dynamic Flux Balance Analysis Framework to a Wine Fermentation for Understanding and Steering Aroma Formation
351as
Experimental Design Algorithm for Efficient Optimization of Culture Media
611e
CO2 Capture Using 3D Printed PEI Adsorbents Supported By Carbon Nanostructures
488b
Including Anharmonicity in Adsorbate Partition Functions and How It Affects Theoretical Parameter Estimates for Desorption of Methanol from a Cu(111) Surface
653f
Automatic Mechanism Generation Using Rmg, Linear Scaling Relationships, and Sensitivity Analyses Applied to the Catalytic Partial Oxidation of Methane
388a
Modeling and Simulation of 'fuzz' Formation Onset in Plasma-Facing Materials
148d
Universal Correlation for the Binary Interaction Parameter of Hydrogen with Petroleum Fractions in Refinery Hydroprocessing Applications
36d
Operando study of CO2 Hydrogenation Reaction Catalyzed By in2O3-Based Catalysts
489a
Solvent Tolerance of Freeze-Dried Cfps Reactions Enables Materials Applications (Industry Candidate)
559b
Invited Talk: Grid-Level Thermochemical Energy Storage Using the Magnesium-Manganese-Oxide Redox System
744f
Soil Water Map Construction Using Microwave Sensor and Agro-Hydrological Model
171a
The Important Role of Hydrogen in Synthetic Fuels
382b
Measuring Packing Length in Simulations for Different Polymer Architectures
345c
Collective Realities: A Discussion of Encultured Norms in the Context of Improving Learning and Workplace Justice
483d
The Measurement of Solute Mixing Rates in the Flow of Concentrated Suspensions through Straight Conduits
22f
Varying Oleylamine to Dibenzyl Ether Ratio for Fine-Tuning Manganese Oxide Nanoparticle Diameter and MRI Signal Intensity
476g
Oxidized Alginate Microgels for Drug Delivery and Cell Encapsulation
156l
Development of a Harvest Small Scale Model to Simulate Continuous Centrifugation
314f
Synthetic Packed Bed Generation and Contact Modifications for CFD Simulations of Industrial-Scale, Fixed-Bed Reactors
576h
Continuous Solid-State Deracemization Via Temperature Cycles – a Model-Based Process Development
541d
Handling a Class of Non-Convexities in MINLP for Utility Optimization
497e
Measurement of Cancer Cell Drug Response with Quantitative Phase Imaging
78e
Measuring Student Academic Motivation Toward Process Safety Decision Making within a Virtual Digital Environment
View
Identifying Predictors of Nanoparticle Uptake in Cancer Cells
220b
Minkowski Functionals for Phase Behavior Under Confinement
330a
Direct Imaging Methods Show Limitations of Traditional Biofilm Staining Techniques
22b
Near-Infrared Optical Detection of Dopamine Based on Xeno Nucleic Acid (XNA) Sensors
166l
Near-Infrared Optical Detection of Dopamine Using Xeno Nucleic Acid (XNA) Sensors
292c
Near-Infrared Optical Detection of Dopamine Based on Xeno Nucleic Acid (XNA) Sensors (Award Session)
293h
Templating Colloidal Sieves for Tuning Nanotube Surface Interactions and Optical Sensor Responses
513au
Unprecedented Catalytic Photoprotection with an Earth-Abundant and Non-Toxic Material
172d
A Multiple Model Predictive Control Approach Based on Dynamic Discrepancy Reduced Order Modeling
512r
Bio-Oilfield Chemicals for Upstream Oil and Gas Applications
148e
Distillation Curve and Vapor Pressure Predictions of Alcohol-Gasoline Mixtures Using an Advanced Equation of State
709b
Phase Separation Kinetics and Settler Design
580d
Biochar from Agricultural Waste Via Microwave-Driven Pyrolysis
372d
Optimized Mesostructures of Li-Ion Battery Electrodes Predicted from Particle-Based Simulations
163i
Molten Salt Synthesis of MgO and NiO Exposing Polar and High Index Facets
315i
Characterizing Open-Metal Site Density and Speciation in Metal Organic Framework Materials: The Case of MIL-100(Cr)
513bw
Comparison of Autothermal and Cooled Tubular Reactor Designs for Odh of Ethane over Movtenbo Mixed Metal Oxide Catalyst
513bx
Kinetic Study of Ethane Oxidative Dehydrogenation (ODH) over Bulk NiO-Based Catalysts
513cp
A Transient Kinetic Analysis of the Evolution of Cerium Oxide Towards Effecting Non-Oxidative Alkanol Dehydrogenation
513en
Characterization of M2+ Active Sites in MIL-100 Metal-Organic Framework Catalysts for Light Alkane Oxidation
513eo
Metal–Organic Framework MIL-100 Catalyzed Acetalization of Benzaldehyde with Methanol: Lewis or Brønsted Acid Catalysis?
677h
A Transient Kinetic Analysis of the Evolution of Cerium Oxide Towards Catalyzing Non-Oxidative Alkanol Dehydrogenation
705g
Molten Salt Synthesis of Metal Oxides Exposing Polar and High Index Facets
738b
Kinetics of Ethane Oxidative Dehydrogenation over Bulk NiO-Based Catalysts
758g
Characterization of M2+ Open-Metal Site Formation in MIL-100 Metal-Organic Framework Catalysts for the Direct Oxidation of Light Alkanes
279b
High Throughput Process Development for CEX Chromatography
506a
An Integrated Model for Food-Energy-Water Nexus to Study Global Sustainability
476c
Utilizing Variable Substrate Stiffness to Investigate Macrophage Response in Healthy and Fibrotic Pulmonary Microenvironment.
313a
Coupled Microbial-Conversion and Computational-Fluid-Dynamics (CFD) Models for Butanediol Production in Micro-Aerated Bioreactors
48c
Characterizing the Biocatalytic Properties of Cytosolically Expressed Penicillin G Acylase from E. coli for the Synthesis of Cephalexin and Comparison with βF24A Mutant
121a
Microfluidics-Based Biocatalyst-Product Separation for Continuous Enzymatic Processes. a Case Study on β-Lactam Antibiotics Manufacturing
204b
Crystallization Optimization By Enzymatic Control of a Reactive Crystallization
241g
Analysis of Continuous Reactive Crystallization Process to Beta-Lactam Antibiotics Via Green Chemistry Criteria
344b
Novel Approach for the Delamination of the Zeolite MCM-22
369a
Enzymatic Reactive Crystallization of Cephalexin Using Immobilized Penicillin G Acylase from E. coli
384g
Immobilization Optimization of α-Amino Ester Hydrolase from Xanthomonas Campestris Pv. Campestris for Enzymatic Production of β-Lactam Antibiotics
438c
Continuous Enzymatic Production of Enantiopure Amines in a Packed Bed Reactor with an Amine Dehydrogenase
478c
Model Development for Enzymatic Reactive Crystallization of β-Lactam Antibiotics: A Reaction-Diffusion-Crystallization Approach.
569c
Characterization of an α-Amino Ester Hydrolase from Xanthomonas Campestris Pv. Campestris suitable for Cephalosporin Synthesis but Not Amoxicillin Synthesis
646a
Monitoring and Detection of Byproduct Crystallization Using in-Situ Microscopy
711d
Sparged but Not Stirred: Enzyme-Catalyzed Deracemization of Alcohols in a Bubble Column
744g
Continuous Direct Compaction Tablet Manufacturing Characterization Using Data-Reconciliation and Residence Time Distribution Functions
690c
Targeting the Pro-Lymphoma Stromal Microenvironment
19d
Tuning Performance of Ketone Partial Oxidation over Supported VOx and Its Utilization: Selective Maleic Anhydride Production from Levulinic Acid Oxidative Scission.
19f
Noble Metal Catalyzed Ketone Hydrogenation with Microkinetic Modeling
334aa
Tuning Catalysts for Efficient Chemical and Energy Transformation
671c
Elucidating the Roles of Lattice and Molecular Oxygen during the Oxidative Scission of Methyl Ketones over Supported Vanadium Oxides
677g
A Spectroscopic Study of the Reaction Mechanism for Oxidative Scission of Methyl Ketones over Supported Vanadium Oxides
666e
Synchrotron-Based X-Ray Spectroscopy of Foulants on Reverse Osmosis Membranes
101a
Deterministic Global Dynamic Optimization of Hammerstein-Wiener Models
218d
Design with Equilibrium Processes Embedded: Global Optimization with Guaranteed Phase Stability
554g
Early-Stage Evaluation Procedure for CO2 Utilization Technologies at Low Technology Readiness Levels: A Case Study for Electrochemical Production of Ethylene
623a
Advanced Carbon Capture System for Power Plants
142b
Projecting Frequency Dependent Mechanical Properties of an Aromatic Polyimide at 4 Kelvin
57d
Spray Releases from Pressurized Piping in Nuclear Facilities
17f
Learning-Based MPC with State-Dependent Uncertainty Using Adaptive Scenario Trees
299f
Fast Approximate Multistage NMPC with Online Scenario Tree Generation Using Active Deep Learning
744d
Embedded Deep Learning-Based Robust Model Predictive Control for Fast-Sampling Atmospheric Pressure Plasma Jets Using Field Programmable Gate Arrays
462b
Hands-on Biochemical Production and Process Design
533b
Neutrophil Extracellular Traps and Extracellular Vesicles: Mediators of Metastasis in Breast Cancer?
18c
Towards Automated and Comprehensive Exploration of the Methane Physisorption Space Using an Iterative Mutation Search Algorithm
621b
Assessing the Impact of Allosteric Enzyme Regulations Limiting Ethanol Titer in Clostridium Thermocellum Using a Core Kinetic Model
163m
A Facile Preparation Method of Pd Thin Film on Porous Stainless Steel with Enhanced Smoothness and Optical Property
592f
Mechanistic Understanding and Rapid Electrochemical Reduction of Silica for Lithium-Ion Battery Anodes
727d
Correlation of the Formation Damage for Secondary Reservoir Pressure Maintenance
245d
Nanotopographical Amplification of Bacteria-Material Repulsive Interactions for Mitigating Bacterial Attachment and Biofilm Formation
98b
Using the Conical Screen Mill As a Practical and Effective Dry-Coating Process to Enable Direct Compaction for High Drug Loading Formulations
View
Electroadhesion of Polyelectrolyte Hydrogels to Plant Tissue
85e
Ethylene Production Using Oxidative Dehydrogenation: Effects of Combined Membrane-Based & Alternative Distillation Separation Technologies on Process Safety & Economics
263g
Thermal Treatment of Granular Materials in a Rotary Drum Equipped with Baffles
367f
Model Predictive in Vitro Dissolution Testing for Real-Time Release in Pharmaceutical End-to-End Integrated Continuous Manufacturing: An Equivalence Study
611c
Novel Polymeric Fiber Sorbents Embedded with Porous Organic Cages
684c
Dynamic Simulation of Metal Oxide Reduction Processes Using a Coupled Reactor-Particle-Continuity Model
311d
Rational Engineering of Clostridium for Efficient Production of Renewable Fatty Acid Esters
611e
CO2 Capture Using 3D Printed PEI Adsorbents Supported By Carbon Nanostructures
520g
Micro-Biogeography Matters Greatly for Competition: Continuous Chaotic Bioprinting of Spatially Controlled Bacterial Microcosms
28h
Effect of Tungsten Disulfide Nanotubes (WSNTs) on Flow-Induced Crystallization of Polylactide (PLA) for Thinner and Stronger Bioresorbable Vascular Scaffolds.
496g
Optimizing the Solvent for Extreme-Strength Two-Dimensional Polymers
435b
Utilizing Mechanistic Modelling to Support Scale-up of Fed-Batch Reaction Process
294b
Confinement Effects at the Interface between 2D-Silicates and Their Metal Supports
471f
Co-Optimized Power and H2 Infrastructure Planning for Multi-Sector Decarbonization
507b
Understanding Glycolaldehyde Formation from Various Monosaccharides
3ib
Designing biomaterials for immune modulation in tissue engineering and regenerative medicine
609e
Complex Tissue Regeneration 1
25d
Population Balance Model Comparison of Growth, Secondary Nucleation By Attrition and Ripening
88c
Molecular Engineering of a Colorimetric Nanogel Sensor for Clinical Radiotherapy and Trauma Monitoring
333c
Understanding the Impact of Formation Properties on Stress Shadow in Multistage Hydraulic Fracturing through Modeling and Simulation
375d
CO2 Injection Monitoring with a Scalable, Automated Sparse Seismic Array
754f
Improving CO2 Enhanced Oil Recovery Performance through Data Analytics and Next-Generation Controllable Completions
3o
Poly- and Perfluoroalkyl Substances (PFAS) Bind to Proteins and Stiffen Membranes: Using Physicochemical Properties to Characterize Human and Environmental Effects
197d
Perfluoroalkyl Substances (PFASs) Partition into Bacterial Cell Membranes and Cause Unexpected Lipid Ordering
265c
Dominant Entropic Binding of Perfluoroalkyl Substances (PFASs) to Albumin Protein Revealed By 19f NMR
265f
Binding of Perfluoroalkyl Substances (PFAS) to Serum Albumins: A Comparison of Human and Bovine Serum Albumins
308j
Using Microemulsion Phase Behavior As a Predictive Model for Lecithin-Tween 80 Marine Oil Dispersants
395h
Carbon Black-Gold Nanoparticles for Detection of Analytes Using Surface Enhanced Raman Scattering
514i
Perfluoroalkyl Substances (PFAS) Affect the Membrane Fluidity of Alcanivorax Borkumensis but Do Not Delay Growth
367f
Model Predictive in Vitro Dissolution Testing for Real-Time Release in Pharmaceutical End-to-End Integrated Continuous Manufacturing: An Equivalence Study
732a
Electrochemical Control of the CO2 Capture Capacity of Amine Sorbents Using Cu (II)/Cu (I) Redox Chemistry
278h
From Partial Data to out-of-Bounds Parameter and Observation Estimation with Diffusion Maps and Geometric Harmonics
576d
Maneuvering Around Liquid-Liquid Phase Separation (LLPS) to Enable Development of Robust Crystallization Processes.
33f
An Algorithmic Toolbox for Surrogate-Based Optimization of Mixed- Integer Nonlinear Problems
101g
Convergent Simulation-Optimization Using Machine-Learning, Branching, Bounding and Data-Driven Convex Underestimators
109e
Physics Informed Machine-Learning for Static Security Analysis of Optimal Power Flow Solutions
224c
Data-Driven and Hybrid Modeling of Integrated Paper Production Systems
334i
Data-Driven Parameter Estimation of Hybrid Models
578e
Simulation-Based Optimization with Embedded Dynamic Models Using a Data-Driven Spatial Branch-and-Bound Algorithm
674b
Indirect Parameter Estimation of Dynamic Mechanistic Models via Hybrid and Neural Differential Equations.
323f
Prediction of Adsorption of CO2 and Hydrocarbons in Zeolites: A Strong Test of Atomically Detailed Models
293h
Templating Colloidal Sieves for Tuning Nanotube Surface Interactions and Optical Sensor Responses
510f
Modeling of Indoor Airborne COVID-19 Transmission Via Human Expiratory Activities
513cj
Atomically Precise Design of Heterogeneous Catalysts for Enhanced Pairwise Selective Addition of Parahydrogen to Unsaturated Hydrocarbons
8f
AMBR®250 Scale-DOWN MODEL Limitations and MASS Transfer Characterization
View
Histochemical Analysis to Investigate the Efficacy and Safety of Suprachoroidal Injection in Rodents Using Microneedles
View
Clarkson University - Northeast Region
550e
Reflections on Karl Jacob and Some New Results on Powder Flow Enhancement Using Magnetically Assisted Impact Coating
513am
Metal Phosphides As Highly Active Catalysts for CO2 Hydrogenation Reactions
16d
Development of Accurate Surrogate Models for Crystal Structure Prediction: Bridging the Gap between Force Fields and DFT
446d
Internal Liquid Crystal Structures in Nanocarriers Containing Drug Hydrophobic Ion Pairs Dictate Drug Release
135e
Atomic Layer Deposition of Metal Oxides for More Stable Operation of Perovskite Solar Cells
483b
Dual Hydrodynamic Trap
256f
Agitation in Suspension Polymerizers: Comparison of Impeller Configurations Using LES-CFD
513o
Mechanisms and Control of Industrial Multistage Chemical Reactions from Renewable Resource
78g
Bringing ChemE-Sports, a Safety and Optimization Competition, to the Chemical Engineering Profession
8e
Process Development, Characterization, and Understanding in an Integrated Continuous Monoclonal Antibody Manufacturing Testbed
367d
Process Control Strategy Development for an Integrated Continuous Platform for Monoclonal Antibody Manufacturing
542e
First-Principles Dynamic Simulation of an Integrated Continuous Biomanufacturing Platform
686c
Determination of Minimum Catalyst Mass Requirements for Heterogeneous Reactive Distillation Columns
3ci
Optimal Design and Control of Advanced Biomanufacturing Systems
8e
Process Development, Characterization, and Understanding in an Integrated Continuous Monoclonal Antibody Manufacturing Testbed
157aa
Process Analytical Technologies for Recombinant Adeno-Associated Virus-Based Gene Therapy
157v
A Mechanistic Analysis of Recombinant Adeno-Associated Virus Productivity in Biomanufacturing
161av
Heterogeneous Nucleation Mechanisms in Polyolefins: Experiments Linked with Molecular Simulations
161y
Model of Nonisothermal Blown Film Extrusion Using the Perturbation Expansion Technique
195e
Digitalization of Biopharmaceutical Manufacturing
224b
Recognizing and Avoiding Big Data Analytics Traps in Applications
334v
Automated Optimization and Control of Modular Chemical Systems
367d
Process Control Strategy Development for an Integrated Continuous Platform for Monoclonal Antibody Manufacturing
477d
Inverse Learning of Material Physics through Image Data and Continuum Modeling
542e
First-Principles Dynamic Simulation of an Integrated Continuous Biomanufacturing Platform
620b
Modeling of Copy Number Variability in Pichia Pastoris
667d
Mathematical Modeling of Gene Therapy Manufacturing
716c
Polynomial Narmax-Based Nonlinear Model Predictive Control of Modular Chemical Systems
452g
Coupled Numerical and Experimental Analysis of Transport Properties in 3D-Printed Periodic Cellular Media to Enable Catalytic Reactors Design
522h
Constrained Reinforcement Learning for Process Optimization and Control
View
Structural Characterization of Nematic Colloids at Liquid Crystal-Air Interfaces Prepared Via Photopolymerization
638e
Thermodynamic Analysis of Multivalent Binding of Functionalized Nanoparticles to the Membrane Surface
720a
Developing Performance-Advantaged Chemicals Utilizing Bioprivileged Molecules: Organic Corrosion Inhibitors
668a
Gelpins: A New Strategy for Discrete Yet Cohesive Tissue Assemblies within ‘Cut & Assemble’ Organ-Chips
352m
Development of a COSMO-Based Thermodynamic Model with Wertheim’s Thermodynamic Perturbation Theory
365c
Multiscale Screening of Adsorbents for Post Combustion Capture: Effect of the Vacuum Swing Adsorption Process Configuration on the Adsorbent Performance
709e
Advanced Process Designs and Operating Modes of the TAPPIR®-Technology for Continuous Aqueous Two-Phase Extraction
357d
Developing a High-Throughput Reductive Catalytic Fractionation Method for Lignin Characterization in the Genome Wide Association Study of Poplar
437e
Mesoscale Reaction‐Diffusion Phenomena Governing Lignin‐First Biomass Fractionation
455e
Alkaline Oxidation of Lignin Using Reversibly-Soluble Bases
664d
Recent Advances in Plastics Upcycling
346ag
Computational Modeling to Understand the Spatiotemporal Cholinergic Modulation of Hippocampal Synaptic Plasticity
150e
Model for Intrinsically Disordered Proteins with a Strong Dependence of Liquid-Liquid Phase Separation on Sequence
652h
New Adsorptive PSA Separation Process for Production of Isopentane and Di-Methyl Branched Paraffins from C5/C6 Light Straight Naphtha Feeds
719a
Trend-Based Assessment of Industrial Rotating Equipment Health
175h
Vapor Phase Ethanol Selective Oxidation to Acetaldehyde and Acetic Acid on Gold Catalysts
383c
Selective Production of Glycolaldehyde Via Hydrothermal Pyrolysis of Glucose: Experiments and Microkinetic Modeling
437b
Effects of Hydrophilicity on Aldol Condensation and Esterification Reactions of Acetaldehyde and Ethanol over Ti-BEA Catalysts
513bv
Tuning Electronic Properties of Active Sites for Alkene Epoxidations with H2O2
704b
The Shape of Water in Zeolites and the Impact on Alkene Epoxidations
714h
Micropore-Mediated Interactions Among Surface Intermediates: Role of Oxidant Structure and Pore Size on Alkene Epoxidation in Titanium Silicates
741c
Linear Free-Energy Relationships Describe Alkene Epoxidations over Groups 4-6 Lewis Acid Zeolite Catalysts
758b
Influence of Copper Site Structure and Proximity in Cu-CHA Zeolites on Partial Methane Oxidation to Methanol
83e
Process Intensified Spray Drying of Milk in a Counter Flow Dryer: Experimental Investigation of Evaporation and Deposition Zones
695b
Invited Talk: From Carbon Dioxide and Water to Carbon-Neutral Fuels and Chemicals
296e
Combinatorial Discovery of Ligand-Fucntionalized Microbeads for Selective Enrichment of Methylated and Unmethylated DNA
271f
Meeting Unit Operations Laboratory Learning Outcomes in the Era of Covid-19
29f
Building Block and Self-Assembly Design with Magnetic Handshake Materials
162i
Effect of Electrode Surface Coating with a Biodegradable Copolymer on Biofuel Cell Performance.
174c
Oxidative Stress Response in Human Pulmonary Cells Following Titanium Dioxide Particulate Exposure
350s
PLA-paclitaxel Nanoparticles in Lung Cancer Nano-Delivery Systems
577e
Machine Learning for the Prediction of Glass Transition Temperature of Biodegradable Polymers
616h
Kinetic Analysis of Degradable Resins in Digital Light Processing
644b
Comparative Evaluation of Dissolution Behavior and Bioequivalence of Various Capsules
30e
Comprehensive Characterization of the Water-Soluble Fraction Produced from Hydrothermal Liquefaction of Food Waste
38b
A Study on Chemistry and Fractionation of Guayule Resin As a Source of Secondary Metabolities and Energy
194g
Development of Middle School STEM Classroom Lesson Plans and Afterschool Program Activities to Support USDA-Sponsored Project on Alternative Crop Bioenconomy
446f
Silicone Hydrogel Contact Lenses Loaded with Unsaturated Fatty Acids for Extended Release of Cationic Drugs
360a
Scaffolded DNA-Dye Complexes: Theory of Molecular Interactions for Synthetic Light Harvesting Applications
316d
Aerosol Therapeutic Delivery in 3D Printed Pediatric Airway Replicas
165a
Electrospun Carbon/Iron Composite Nanofibers and Their Utilization As Nanoadsorbents for Enhanced Cr(VI) Removal from Water
230a
Catalytic Effects of Iron on the Carbonization Process of Electrospun Carbon/Iron Nanofibers and Their Utilization As Nanoadsorbents for Enhanced Cr(VI) Removal from Water
460b
Pharmacy on Demand: An End-to-End Approach to Developing a High-Dose, Poorly Flowing API into a Robust Continuous Manufactured Formulation
253a
Increasing Isoprenol Production in Engineered E. coli through Medium Optimization and Different Fermentation Strategies.
537e
Cloud-Based Control of a Robotic Manufacturing Process for Personalized Medicines
70g
Cycled Organophosphate (DMMP) Decomposition over Plasmonic Copper TiO2 Aerogels
162e
Incorporation of Bio-Inspired Polymeric Coatings for Schwann Cell and Mesenchymal Stem Cell Development in Neural Tissue Engineering.
458e
Thiol-Affinity Immobilization of Casein-Coated Silver Nanoparticles on Polymeric Membranes for Biofouling Control
350aa
Implementation and verification of numerical solution of the bivariate population balance equation in a finite-element open-source framework
35a
Curating a Comprehensive Set of Enzymatic Reaction Rules for Efficient Novel Biosynthetic Pathway Design (Industry Candidate)
334c
Understanding Second-Shell Catalyst Interactions for Enhancing the Performance of Arylborane-Catalyzed Epoxide Ring-Opening
344n
Effects of Ni Site Density on Deactivation Rates and Mechanisms during Ethene Oligomerization on Ni-Beta Zeolites
344r
DFT Analysis of Ethene Oligomerization on Metal Exchanged Zeolites
346ad
Monomer-Based Kinetic Monte Carlo Simulation for Multifunctional Polymerization
383c
Selective Production of Glycolaldehyde Via Hydrothermal Pyrolysis of Glucose: Experiments and Microkinetic Modeling
597e
Kinetic Monte Carlo Simulation to Study the Initial Curing Phase of Model Paint Films
653c
Strong Influence of the Nucleophile on the Rate and Selectivity of 1,2-Epoxyoctane Ring-Opening Catalyzed By Tris(pentafluorophenyl)Borane
704a
Increasing the Selectivity of B(C6F5)3-Catalyzed Epoxide Ring-Opening Using Hydrogen Bonding
756h
Olefin Oligomerization on Acidic Zeolites: A Mechanistic Model for Catalyst Optimization
326a
Low-Temperature Chemical Looping Oxidative Dehydrogenation of Ethane for Modular Ethane to Liquids
350a
Chemical Looping – Oxidative Dehydrogenation of Ethane Using Surface Modified Mixed Oxide Particles: Kinetic Studies and Process Demonstration
706h
Kinetic Studies on Chemical Looping – Oxidative Dehydrogenation of Ethane Using Surface Modified Mixed Oxides
122e
Sprayable, Thermoreversible Hydrogels for Improved Treatment of Burn Wound Infections
12e
How Temperature during Fermentation Affects Quality and Flavor in Cocoa Liquor
754e
SMART: A New Initiative to Transform Subsurface Visualization and Prediction through Machine Learning
270a
Reactive Imbibition of Acidic Hydraulic Fracture Fluids into Unconventional Shales
151a
From Skin to Nervous System – Epidermal Neural Crest Stem Cells, a Novel Autologous Candidate for Therapeutic Applications
491c
A SOFC-Based Multi-Energy System for the Efficient Production of Hydrogen and Power from Natural Gas for Hydrogen Refuelling Station Applications
117f
Toward a Biological Toolkit: Systematic Characterization of Double Emulsions for Screening Applications
120g
Stability of the Alternating Gyroid Morphology Formed By a Triblock Copolymer Increases By Adding Homopolymer
260a
(Invited Talk) Development of Lateral Flow Tests for Sars-Cov-2 Antibody and Antigen Detection
116i
Finite Element-Based Calibration of Effective Interphase Properties in Composites Reinforced with Randomly Distributed Spherical Particles
546h
Electrospun Infrared-Transparent Solar-Reflecting Nanofibers for Direct Radiative Cooling
588a
A Low Affinity Humanized CD-19 Targeted Chimeric Antigen Receptor Efficiently Controls B-Cell Malignancy
398b
Quantification of Lithium Plating and Sources of Capacity Loss during Fast Charging of Graphite Electrodes
256a
Obtaining Relevant Rheological Data and Its Application to Single and Multiphase Mixing Processes - Suspension of Solids in Non-Newtonian Fluids
270a
Reactive Imbibition of Acidic Hydraulic Fracture Fluids into Unconventional Shales
594a
Using CFD to Simulate Tank Clean-in-Place Process
13d
Orthogonal Methods Are Critical for Characterizing Nanoscale Colloids
28b
Investigating Primary Nucleation in Polymer Melts Using GPU-Accelerated Wang-Landau Simulations
424c
De Novo biosynthesis of a Nitro-Containing Amino Acid
418a
Self-Propelling Bubbles
696h
Using CexTi1-XOδ Supported Ni for Dry Reforming of Ethane
3dx
Oxidative Depolymerization of Lignin in Perfluorodecalin
104a
Adventures in Autothermal Processing
334u
Lignin Depolymerization and Esterification By Carboxylic Acids to Produce Biodiesel
416g
On CFD-DEM modeling of fluidized beds for bioenergy applications
555b
Separation of Lignocellulosic Sugars from Pyrolytic Bio-Oil Using Simulated Moving Bed
570b
Application of Hydroprocessing, Fermentation and Anaerobic Digestion in a Pyrolysis Refinery to Maximize Economic Value
77c
Wafer-Scale Synthesis of Monolayer Organic-Framework Films
513fl
Thermal & Microwave-Assisted Synthesis of Ammonia with a Chemical Looping Approach
8c
Continuous Protein Purification: Utilizing Multi-Stage Liquid-Liquid Extraction
285d
Gaussian Process-Based Model Order Reduction for the Prediction of Gaseous Storage in Metal-Organic Frameworks.
431f
Parameter Sensitivity Analysis of a High-Shear Wet Granulation Model for Experimental Design and Parameter Estimation.
471h
Techno-Economic Analysis of Electricity Storage Technologies for behind-the-Meter Applications
471k
Optimal Electric Vehicle Charging Schedule: Impact of User Travel Behaviour and Distributed Energy Resource Availability
425i
Forced Imbibition in Stratified Porous Media
38a
Enhanced Hardness and Strength of Zero-Coalescent Waterborne Acrylic Coatings with Cellulose Nanocrystals
514u
Challenges to Combating Waste Plastic Accumulation Globally with the Production of Plastic Derived Fuel Oil (PDFO)
592i
Operando Energy-Dispersive X-Ray Diffraction of Sulfur-Based All Solid-State Lithium Batteries
161ao
Exploring the Synthesis-Structure-Property of Dye Incorporated Liquid Crystalline Polymers within Unique Polymeric Templates
426f
Implementation of a Vapor-Liquid Equilibrium and Vapor Purge Model for Scale-up of a Transfer Hydrogenation
255d
Scalable Synthesis of Selective Hydrodeoxygenation Core-Shell Pd@TiO2 Nanocatalysts
334ay
Jet-Mixing Reactor for Nanomaterial Synthesis and Scale-up Considerations
344y
Enhancing Hydrophobicity and Catalytic Activity of Nano-Sn-Beta through Post-Synthetic Treatment with Fluoride
513ee
Tuning the Design of Aminosilica Materials for Enhancing Acid-Base Cooperative Interactions for the Aldol Reaction and Condensation
741a
Selective Glucose Isomerization to Fructose Using a Heterogeneous Immobilized Tertiary Amine with Tuned Molecular Design
741f
Elucidating Structure-Function Effects of Pore Architecture for Aminosilane Functionalized SBA-15
537f
Advances in Industry 4.0 - Development of a Smart Robotic Platform for Autonomous Synthesis of Downstream Processes
673i
Designing Shape-Changing Nanoscale Building Blocks for Self-Assembly Via Surface-Charge-Patterning of Deformable Nanoparticles
220d
Size-Selective Dynamics of Large Hetero-Epitaxial Islands on FCC(001) Surfaces
538c
Cross-Linking of Matrimid/Porous Organic Cage Molecularly Mixed Composite Membranes Using Cycloaddition Click Chemistry
3cz
Composite Polymer-Ceramic Membranes for Redox Flow Batteries
257b
Flow Reactors for Rapid Screening of Reaction Parameters to Synthesize Molybdenum Carbide Catalysts for Biomass Conversion Processes
142c
Tuning the Assembly and Photonic Properties of Perovskite Nanoparticles
158b
Unveil Epigenetic Memory Conferring Parkinson’s Disease Risks Arising from Exposure to Environmental Chemicals
166d
Impact of Pore Size on Catalytic Behavior in Mesoporous Au@SiO2 Core-Shell Nanoparticles
257d
Mechanism of Nanoparticle Synthesis in Reversible Ionic Liquid Systems
513ez
Switchable Surfactants for the Preparation of Monodisperse, Supported Nanoparticle Catalysts and the Effects of Calcination
741h
Mesoporous Au@SiO2 Core-Shell Nanoparticles for Highly Active Solvent-Free Benzyl Alcohol Oxidation
80e
Controlling Spatiotemporal Properties of Hydrogels to Improve Tissue Engineering
11j
Quantifying the Adsorption Dynamics between Mabs and Surfactants at the Air/Water Interface
334bk
Redesign and Develop Effective Liposomal Formulation for Prodrug Delivery through Synchrotron X-Ray Studies of Molecular Interactions
349c
Study of the Orientation of Mabs at the Air/Water Interface
639e
Ice Engineered Cellular Plastics
8d
Using a High Throughput Cell Culture Workflow for Process Development and Process Characterization for Therapeutic Proteins
View
Virtual Student Chapters: How to Communicate and Engage Students Effectively
622a
Development of Synexomes: Next Generation Lipid-Based Drug Delivery
120g
Stability of the Alternating Gyroid Morphology Formed By a Triblock Copolymer Increases By Adding Homopolymer
513g
Evaluation of a Novel Nickel-Ceramic Filter for Hot Gas Removal of Tars and Particulates from Biomass Syngas
401e
Integration of Techno-Economic and Life Cycle Assessment: Defining and Applying Integration Types for Chemical Technology Development
346au
Machine Learning Using the Guest/Host Energy Histogram to Predict the Adsorption of Chain Molecules
397d
The Effect of Wood Composition and Supercritical CO2 Extraction on Fast Pyrolysis Products
227b
Carbon Nanotube Photoluminescence in Chemical Biology
477h
Explainability Based Fault Detection and Diagnosis Using Deep Learning
271g
Got Water? : A Filtration Experiment for the Material and Energy Balance Course
320h
Effects of Particle Size and Shape on Granular Shear Flows in Shear Cells
560b
Single-Cell Immune Landscape of Influenza Infection in the Mouse Lung: Implications of Aging and Genetic Background
423d
High Performance Anion Exchange Membranes Based on Block Co-Polymers for Energy Conversion Applications
386b
Stimuli-Responsive Carbon Nanotube Membranes for Chemical Warfare Protection
176d
A Cation-Driven Bioinspired Approach to Actuate DNA Bonds in Colloidal Crystals
428g
Cyclic Stabilization Method for Lithium Mediated Electrochemical Nitrogen Reduction
166ak
A Simple Evaporative Deposition-Photopolymerization Approach for Facile Fabrication of Polymeric Hydrogel Films Containing Micropatterned Opal Structures
3v
Computational Engineering of Catalysts Beyond the Active Site
529f
High-Throughput Screening of Alkane and Organophosphate Diffusion in Metal-Organic Frameworks
677b
Solvation of Water and Alkanols Confined within Brønsted Acid Zeolites: Kinetic Effects of Protonated Clusters and Extended Networks
714a
Ab-Initio characterization of Water Clusters at Acid Sites in Microporous Zeolites and Their Influence on Ethanol Dehydration Kinetics
View
Workshop: Effective Teaching for New or Prospective Faculty
668e
The Progression and Zonation of Non-Alcoholic Fatty Liver Disease on a Chip
673b
Thermodynamic Phase Diagram of Amyloid-β (16–22) Peptide
497i
Point-of-Care Low-Cost Cancer Therapeutic Production and Monitoring Efficacy in Human Serum with Cell-Free Protein Synthesis: Toward on‐Demand Treatment of ALL
534a
Optimizing Protein-Polymer Conjugation through Course Grain Simulation and Cell-Free Protein Synthesis: Toward Better 2nd Generation Biologics
556b
Biosensing of Human Hormone Disruptors in Blood and Urine with Protein Folding Using Cell-Free Protein Synthesis
723c
Rational Design of Protein Devices: Predicting How Functionalization and Unnatural Amino Acid Mutations Affect Protein Stability Using Molecular Simulation and Experiment
573c
Collagen Type I and Aldehyde/Hydrazide-Modified Hyaluronic Acid Hydrogels for Tissue Engineering
329a
Model-Based Approach for Multivariate Signaling Regulation of Epithelial-Mesenchymal Transition in Pancreas Cancer Cells
121b
Novel Integration of Continuous Crystallization Platforms for Control of Crystal Size Distribution and Polymorphic Form
322f
Web Deployment of Mechanistic Models for Pharmaceutical Applications: Case Studies in Spray Drying and Distillation
469a
Digital Design Via Mechanistic Modelling of a Continuous Crystallization Process with Periodic Wet Milling
52f
Influence of Microgel Fabrication Technique on Granular Hydrogel Properties
158f
α2,3 Sialylated Colon and Breast Cancer Cell Extracellular Vesicles Bind to L-Selectin Under Flow Conditions
25b
Multiscale Computer Modeling to Investigate Polymeric Micelle Based Nanocarriers for Anticancer Drug Delivery
288f
Using Artificial Neural Network As a Predictive Tool for Critical Quality Attributes (CQAs) of Continuous Processing of Liposomes
346an
Multiscale Computational Study of Continuous Manufacturing of Polymeric Micelle Based Nanocarriers
82h
S-Modified Mxenes for Hydrogen Evolution Reaction - a Computational Approach
190d
Hands-on in the Online Classroom: Transitioning a Hands-on Pedagogy to a Virtual Format
536e
ATESA: An Automated Aimless Shooting Workflow
296d
Study of the Spike (S) Glycoprotein from the Sars-Cov-2 As a Possible Source of Translocating Peptides of Biomedical Interest
573g
Surface Functionalization of Silk Protein Films to Control Bioadhesion
78e
Measuring Student Academic Motivation Toward Process Safety Decision Making within a Virtual Digital Environment
513et
Continuous Synthesis of Pd-Carbon Catalysts Using a Spinning Disk Reactor: A Platform for Continuous Catalyst Production
737e
Locating Nth-Plants for Blended Feestock Conversion and Preprocessing Nationwide: Biorefineries and Depots
460b
Pharmacy on Demand: An End-to-End Approach to Developing a High-Dose, Poorly Flowing API into a Robust Continuous Manufactured Formulation
594d
Solvent-Polymer Interactions of Ethylcellulose Films for Pharmaceutical Applications
474b
Selective Flow through Membrane Pores with in Situ Change of Wettability
57d
Spray Releases from Pressurized Piping in Nuclear Facilities
610e
A Variable Height Microfluidic Device for Traumatic Brain Injury Diagnosis and Prognosis (Industry Candidate)
131h
Characterizing Graphene Oxide Suspensions with Rheological Testing and Modeling, Neutron Scattering, and Electrochemical Performance
163n
Salt-Templated Transition Metal and Metal Oxide Aerogels
265e
Combustion Products from Thermal Treatment of Polymers Containing per- and Poly-Fluoroalkyl Substances
487c
Bottom-up All Aqueous Assembly Approach for the Synthesis of Lightweight 3D Carbon Nanocomposite Aerogels for Electrochemical Energy Storage and Conversion Applications
675g
Low-Cost 3D Ni-Based Electrocatalysts for HER and Oer for Fuel Cells
554g
Early-Stage Evaluation Procedure for CO2 Utilization Technologies at Low Technology Readiness Levels: A Case Study for Electrochemical Production of Ethylene
706c
Feasibility Analysis of Chemical Looping Ammonia Synthesis from Stranded Natural Gas.
270d
Improving CO2-EOR in Shale Using Dilute Amounts of CO2-Soluble, Wettability-Altering Surfactants
639c
Rapid Detection of Fentanyl Levels Via Electrochemical Approach for Point-of-Care Diagnostics
666b
Resilient Hollow Fiber Nanofiltration Membranes Fabricated from Crosslinkable Phase-Separated Copolymers
View
Cleaner Production: A Tool for Sustainability in Chemical Industries
446c
Spatial Control of Probiotics Assisted By Magnetic Particles
10c
Fabricating Scaffolds with Gradients in Fiber Alignment and Chemistry for Interfacial Tissue Engineering
436g
"Invited Talk" the Response of Food-Related Pathogens to Natural Antimicrobials Coupled with Non Thermal Novel Processing Technologies in Structured Food Model Systems
346y
Introduction of Alchemical Variables in Metadynamics to Enhance Configurational Sampling
600b
Implementation of Ion Exchange Processes for CO2 Mineralization Using Produced Water Streams
34g
An Efficient Solution Strategy for Solving Large-Scale Dynamic Supply Chains Problems with Modular Production Units
424c
De Novo biosynthesis of a Nitro-Containing Amino Acid
131h
Characterizing Graphene Oxide Suspensions with Rheological Testing and Modeling, Neutron Scattering, and Electrochemical Performance
7b
Long-Term Calibration Models to Predict Ozone Levels with a Metal Oxide Sensor
190b
Incorporating Diversity Equality & Inclusion Training into First-Year Chemical Engineering Curriculum
448a
Manageable Teaching and Service Cheat Codes for Young Faculty
View
AIChE K-12 Module, Grades 9-12 (1) - Air Quality Data Visualization
63g
Impact of Fluidic Oscillation on Solid Oxide Electrolysed Performance
644e
Influence of External Lubricants and the Environmental Conditions on the Puncturing Properties of Gelatin and HPMC Capsules for Inhalation
51a
Xanthan Gum Digestion By Human Gut Microbiota
3a
Robust Decision Support Methodologies, Based on Smart Machine Learning, for Healthcare, Energy Systems and Food Processing
421f
Fundamental Origin of Flux Non-Linearity in Organic Solvent Reverse Osmosis and Organic Solvent Nanofiltration
33g
High-Performance, Scalable Nonlinear Programming Algorithms with Pynumero and Pyomo
View
Ingestible Carbon Monoxide-Loaded Foams to Treat Inflammation
360b
Self-Organized Protein Arrays Guided By DNA Origami Lattices
517m
Stoachastic Techno-Economic Analysis for an Integrated Strategy to Coproduce Jet Fuel Range Alkenes and Pentanediols