689 Polymers in Additive Manufacturing

Thursday, November 19, 2020: 8:00 AM - 9:00 AM
Next-Gen Manufacturing (T6) (PreRecorded+)

Description:
This session will focus on the utilization of macromolecular systems in the emerging field of additive manufacturing. In particular, the session will focus on both experimental and computational efforts that utilize polymers in additive manufacturing. Contributions addressing all methods of polymer additive manufacturing, including fused deposition modeling, stereolithography, selective laser sintering, and direct write, are welcome.

Sponsor:
3D Printing
Co-Sponsor(s):
Materials Engineering and Sciences Division (08), Polymers (08A), Composites (08F)
Chair:
Nese Orbey Email: nese_orbey@uml.edu
Co-Chair:
Michael J. Bortner Email: mbortner@vt.edu


(689a) In Situ Nanometrology of Digital Light Processing Additive Manufacturing
Jason P. Killgore


(689b) Thermally Aged Poly(phenylene sulfide) Powder As a Feedstock for Powder Bed Fusion
Camden A. Chatham, Arit Das, Timothy E. Long, Michael J. Bortner and Christopher B. Williams


(689c) Upcycling Waste Polyesters to Polymers for Additive Manufacturing
Chen Wang, Ana R. C. Morais, Erika Erickson, Nicholas A. Rorrer, Scott Nicholson, Avantika Singh, Alberta Carpenter, Alberta Carpenter and Gregg T. Beckham


(689d) One-Layer Alkylated Poly(olefin) Water Vapor Barriers As Flexible Substrate Coatings
Manos Gkikas


(689e) Numerical Modeling of a Fused Deposition Modeled Embedded Polymer Fiber in a Micro-Dispensed Cladding for Optical Fiber Interconnects
Roger B. Tipton, Dianhao Hou, Thomas M. Weller and Venkat Bhethanabotla


(689f) High Tg and Toughness Materials for Mask-Projection Stereolithography Via in-Situ Sequential Interpenetrating Network
Anh Huynh, Nicolas J. Alvarez and Giuseppe Palmese


(689g) Fused Filament Fabrication of Hot Melt Adhesives
Amy M. Peterson and Masoumeh Pourali
See more of this Group/Topical: Topical Conference: Next-Gen Manufacturing
<< Previous Session | Next Session >>