448 Poster Session: Particle Technology Forum

Tuesday, November 15, 2016: 6:00 PM - 8:00 PM
Grand Ballroom B (Hilton San Francisco Union Square)
Description:
TBD

Sponsor:
Particle Technology Forum

Co-chairs:
Ray Cocco
Email: ray.cocco@psri.org

Manuk Colakyan
Email: manuk.colakyan@renmatix.com

- indicates paper has an Extended Abstract file available on the online proceeding.


(285e) CFD Simulation of a Laboratory-Scale Spray Dryer Fitted with Ultrasonic Nozzle for Production of Skim Milk Powder
Mahsa Naghshineh, Harry E.A. Van den Akker, Emmet O‘Reilly, Akeem Olaleye, Mustafa Sajjia and Gavin Walker

(448aa) Computational Modeling of Large Aspect Ratio, Fibrous Particles
Yu Guo, Carl R. Wassgren and Jennifer Sinclair Curtis

(448ab) Simulations of Flow Behavior of Particles in a Liquid-Solid Fluidized Bed Using a Second-Order Moments Model
Xu Wang, Qinglin Cheng, Shuyan Wang and Shuren Yang

(448ac) Measurement of Permeability of Powder with Reference to Flow Behaviour
Reza Baserinia and Csaba Sinka

(448ae) Multi-Scale Approach to Developing Non-Spherical Particle Models for Realistic Granular Flow Simulations
Kevin E. Buettner, Yu Guo, Dana Lobmeyer, Ranjan Mehta, Manuel Gale, Peter Liever and Jennifer Sinclair Curtis

(448af) Intra- and Inter-Particle Resolved Simulations and Experiments on Thermal Transport in Confined Particle Beds
Thomas Forgber, Federico Municchi, Thomas Puffitsch and Stefan Radl

(448ag) Experimental Study on the Velocity Distribution in a Hydrocyclone with a Highly Viscous Fluid
Thomas Senfter, Martin Pillei and Michael Kraxner

(448ah) Investigation of the Effects of Humidity on Powder Flow By Experimentally Validated Computational Methods
Raj Mukherjee and Bodhisattwa Chaudhuri

(448ai) A Population Balance Based Model to Describe the Rheology of Thixotropic Suspensions with a Yield Stress
Paul M. Mwasame, Antony N. Beris and Norman J. Wagner
File available
(448aj) Analysis about Effects of Operating Parameters on Fine Particle Grinding Process with Vertically Stirred Media Mills
Yang Yang

(448al) Solids mixing in bubbling fluidized beds: CFD-based analysis of BubbleDynamics and Time Scales
Akhilesh Bakshi, Christos Altantzis and Ahmed F. Ghoniem

(448am) Steam-Blown Biomass Gasification in Fluidized Beds:Gas-Flow Distribution for Advanced Reactor Network Models
Akhilesh Bakshi, Christos Altantzis, Addison K. Stark, Richard B. Bates and Ahmed F. Ghoniem

(448b) Cyberinfrastructure Enabled Parallelization of Population Balance Models for Efficient Simulation of Granulation Processes
Anik Chaturbedi, Franklin Bettencourt, Srinivas Mushnoori, Subhodh Karkala, Shantenu Jha, Marianthi Ierapetritou and Rohit Ramachandran

(448c) One-Pot Peptide Synthesis Assisted By Hydrophobic Magnetic Nanoparticles
Hitomi Asama, Yohei Okada and Hidehiro Kamiya

(448d) Multicomponent Particle Granulation in Spray Drying
Satoru Matsuda, Masato Suzuki, Hiroshi Takeda and Hiroki Oka

(448e) Scale-up of Fluidized Reactors Based on Choas Analysis Approch and New Scale-up Methodology
Haidar Taofeeq and Al-Dahhan Muthanna

(448f) Platelet Aggregation at Sites of Vascular Injury
Suresh Ahuja

(448h) Numerical Simulations of the Effect of Ionic Surfactant/Polymer on Oil-Water Interface Using Dissipative Particle Dynamics
Shuyan Wang, Xu Wang, Qinglin Cheng, Ruichen Wang, Shuren Yang and Qun Dong

(448i) Uneven Distribution of Particle Flow in the Riser of Rfcc: Effect of the Number of Feed Injector
Hyungtae Cho, Junghwan Kim and Il Moon

(448j) Synthesis of Fe3O4 and Au-Fe3O4 Dumbbell Nanoparticles By Thermal Decomposition Using Different Reducing Agents
Erdem Alp and Nihal Aydogan

(448k) CFD Simulation of Gas and Solids Mixing in FCC Packing Strippers
Guojing Zhao, Xingying Lan and Jinsen Gao
File available
(448l) The Application of Powder Rheology for Evaluating the Flow Behaviour of Powders for Additive Manufacturing Applications
Jamie Clayton, Tim Freeman, Katrina Brockbank and Robert Deffley
File available
(448m) Process Analytical Technology for High Shear Wet Granulation: Wet Mass Consistency Reported By in-Line Drag Flow Force Sensor Is Consistent with Powder Rheology Measured By at-Line FT4 Powder Rheometer
Tim Freeman, Ajit Narang, Valery Sheverev, Douglas Both, Vadim Stapaniuk, Doug Millington-Smith, Kevin Macias, Ganeshkumar Subramanian and Mike Delancy

(448n) Comparison and Validation of Coupled CFD-DEM and CFD-TFM Simulation Predictions for a Laboratory-Scale Wurster-Coating Process
Peter Böhling, Dalibor Jajcevic, Matej Zadravec, Conrad Davies, Alan Carmody, Pankaj Doshi, Mary T. am Ende, Johannes G. Khinast and Avik Sarkar

(448o) Enhanced Performance of Lithium-Ion Batteries By Atomic Layer Deposition
Rajankumar Patel, Sai Abhishek Palaparty and Xinhua Liang

(448p) Microfluid-Aassisted Hollow Silica Nanoparticle Synthesis for Inkjet-Printed Antireflective Coating
Yujuan He, Ki-Joong Kim and Chih-hung Chang

(448s) Incorporating the Effect of Fluidized-Bed Temperature in CFD Simulation through Particle-Particle Interaction Coefficient
M Helal Uddin and Charles Coronella
File available
(448t) Synthesis and Characterization of Nickel-Cobalt Oxide for Ethanol Decomposition
Anchu Ashok, Anand Kumar and Faris Tarlochan

(448v) Mechanical Characterization of Pollen Grains By Atomic Force Microscopy
Zihao Qu, Zifu Li, Haisheng Lin and J. Carson Meredith

(448x) Understanding Ligand–Nanoparticle Interactions for Silica, Ceria, and Titania Nanopowders
De-Hao Tsai
File available
(448y) Comparing the Flow Behaviour of FCC Catalysts Using the FT4 Powder Rheometer®
Tim Freeman, Jamie Clayton, Ray Cocco, S.B. Reddy Karri and Katrina Brockbank

(448z) Insights from Dem Simulation in Comparative Studies of Granular Material and Its Liquid Counterpart
Chenguang Zhang, Mayur Sathe, Chunliang Wu, Krishnaswamy Nandakumar and Jyeshtharaj Joshi
See more of this Group/Topical: Particle Technology Forum
<< Previous Session | Next Session >>