472875 Trace Levels of Copper in Carbon Materials Show Significant Electrochemical CO2 Reduction Activity

Wednesday, November 16, 2016
Grand Ballroom B (Hilton San Francisco Union Square)
Yanwei Lum1,2, Youngkook Kwon1, Peter Lobaccaro1,3, Ezra L. Clark1,3, Alexis T. Bell1,3 and Joel W. Ager III1,2, (1)Joint Center for Artificial Photosynthesis, Lawrence Berkeley National Laboratory, CA, (2)Department of Materials Science and Engineering, University of California, Berkeley, Berkeley, CA, (3)Department of Chemical and Biomolecular Engineering, University of California - Berkeley, Berkeley, CA

Carbon materials are frequently used as supports for electrocatalysts because they are conductive and have high surface area. However, recent studies have shown that these materials can contain significant levels of metallic impurities that can dramatically alter their electrochemical properties. Here, the electrocatalytic activity of pure graphite (PG), graphene oxide (GO), and carbon nanotubes (CNT) dispersed on glassy carbon (GC) are investigated for the electrochemical CO2 reduction reaction (CO2RR) in aqueous solution. It was observed that PG, GO, and CNT dispersed on GC all exhibit significant electrochemical activity that can be ascribed to impurities of Ni, Fe, Mn, and Cu. The level of Cu in GO can be particularly high and is the cause for the appearance of methane in the products produced over this material when it is used for the CO2RR. Washing these supports in ultrapure nitric acid is effective in removing the metal impurities and results in a reduction in the electrochemical activity of these forms of carbon. In particular, for GO, nearly all of the catalytically relevant metals can be removed. Electrochemical deposition of Cu on GO and PG supported on GC, and on GC itself, increased both the electrochemical activity of these materials and the production of methane via CO2RR. Particularly high rates of methane formation per unit of Cu mass were obtained for Cu electrodeposited on GO and PG supported on GC. We suggest that this high activity may be due to the preferential deposition of Cu onto defects present in the graphene sheets comprising these materials.

Extended Abstract: File Not Uploaded