470821 On the Limitations of Breakthrough Curve Analysis in Fixed-Bed Adsorption

Tuesday, November 15, 2016: 3:15 PM
Cyril Magnin II (Parc 55 San Francisco)
James C. Knox1, Armin D. Ebner2, M. Douglas LeVan3 and James A. Ritter2, (1)Marshall Space Flight Center, Huntsville, AL, (2)Department of Chemical Engineering, University of South Carolina, Columbia, SC, (3)Chemical and Biomolecular Engineering, Vanderbilt University, Nashville, TN

This work examined in detail the a priori prediction of the axial dispersion coefficient from available correlations versus obtaining it and also mass transfer information from experimental breakthrough data and the consequences that may arise when doing so based on using a 1-D axially dispersed plug flow model and its associated Danckwerts outlet boundary condition. These consequences mainly included determining the potential for erroneous extraction of the axial dispersion coefficient and/or the LDF mass transfer coefficient from experimental data, especially when non-plug flow conditions prevailed in the bed. Two adsorbent/adsorbate cases were considered, i.e., CO2 and H2O vapor in zeolite 5A, because they both experimentally exhibited significant non-plug flow behavior, and the H2O-zeolite 5A system exhibited unusual concentration front sharpening that destroyed the expected constant pattern behavior (CPB) when modeled with the 1-D axially dispersed plug flow model. Overall, this work showed that it was possible to extract accurate mass transfer and dispersion information from experimental breakthrough curves using a 1-D axial dispersed plug flow model when they were measured both inside and outside the bed. To ensure the extracted information was accurate, the inside the bed breakthrough curves and their derivatives from the model were plotted to confirm whether or not the adsorbate/adsorbent system was exhibiting CPB or any concentration front sharpening near the bed exit. Even when concentration front sharpening was occurring with the H2O-zeolite 5A system, it was still possible to use the experimental inside and outside the bed breakthrough curves to extract fundamental mass transfer and dispersion information from the 1-D axial dispersed plug flow model based on the systematic methodology developed in this work.

Extended Abstract: File Not Uploaded
See more of this Session: Experimental Methods in Adsorption
See more of this Group/Topical: Separations Division