461364 Tuning of Carbon Molecular Sieve Membranes for Separation of the C3H6-C3H8 Pair

Wednesday, November 16, 2016: 12:48 PM
Plaza B (Hilton San Francisco Union Square)
Oishi Sanyal, School of Chemical and Biomolecular Engineering, Georgia Institute of Technology, Atlanta, GA, John Hessler, Chemical Engineering, Georgia Institute of Technology, Atlanta, GA and William Koros, Chemical & Biomolecular Engineering, Georgia Institute of Technology, Atlanta, GA

Carbon molecular sieve (CMS) membranes display exceptional separation properties for gas-pairs such as C3H6-C3H8, which cannot be addressed using conventional polymers. Such CMS membranes are often formed by controlled pyrolysis of asymmetric polymer precursor fibers. This study considers non-standard pyrolysis protocols for an important polyimide, 6FDA:BPDA-DAM that offers attractive CMS properties for the C3H6-C3H8 pair. Specifically, effects of heating ramp rate, maximum pyrolysis temperature, post-pyrolysis thermal soak time were considered. Fundamental bases for optimization of each of these parameters are offered. The heating ramp profile controls the time spent in each individual stage of the pyrolysis process—especially the period the precursor spends beyond its decomposition temperature. For a given precursor, this critical period sets the micropore and ultramicropore dimensions in the CMS fiber as well as their distributions. Subsequent thermal soak times enable equilibration and rearrangement of the carbon domains, thereby providing tools to tune the CMS fine structure. Somewhat surprisingly, an increase in ramp rates led to a reduction in C3H6 permeance, with the highest ramp rate providing a considerable gain in C3H6-C3H8 selectivity. For a given constant ramp rate, thermal soak time reductions led to discernible improvements in the C3H6 permeance with a moderate compromise in C3H6-C3H8 selectivity. Decreased soak time reduce processing time for CMS membrane fabrication and will be considered in the context of ultimate scale-up of these membranes. Preliminary data on the impact of the above process variables other gas-pair separation will also be considered.

Extended Abstract: File Not Uploaded
See more of this Session: Membranes for Gas Separations II
See more of this Group/Topical: Separations Division