245 Interactive Session: Systems and Process Design

Monday, November 9, 2015: 6:00 PM - 8:00 PM
Exhibit Hall 1 (Salt Palace Convention Center)

Description:
This is the general poster session for CAST 10A - Systems and Process Design. All contributions in the areas of process/product design and analysis will be considered.

Sponsor:
Systems and Process Design
Chair:
Ramkumar Karuppiah Email: ramkumar.karuppiah@exxonmobil.com
Co-Chair:
Fengqi You Email: you@northwestern.edu
- indicates paper has an Extended Abstract file available on CD.



(245a) Production of Bio-Butanol from Wheat Straw: A Proposal for Sustainable Design
Dorothee Luise Kurz, Randi Neerup, Anders Lodberg and Anjan Kumar Tula


(245b) Sustainable Design for Production of Styrene from Benzene and Ethylene
Matias Falk Bjerregaard, Jonas Richard Foelsby and Michael Roland Larsen

File available
(245c) Characterization of Microfluidic CO2 Absorption in Water By Computational Fluid Dynamics
Chongwei Xiao and Hariganesh Bheema

File available
(245d) Use of Exergy in Energy-Efficient Process Design Methodology for Sub-Ambient Processes
Danahe Marmolejo-Correa and Truls Gundersen


(245e) Achieving a More Sustainable Process Design for the Production of Methanol
Cristina Calvera Plaza and Marta Gonzalez Garcia


(245f) Sustainable Production of Butanol – Evaluation of a Bio-Based Process
Ana-Sofia Sanchez-Arcilla, Lorena Blanco, Jonas Bisgaard and Anjan K Tula


(245g) Dynamic Manipulation of a SOFC/GT Hybrid Power Generation System Subject to Low Carbon Emissions
Wei Wu


(245i) Impact of Thermo-Physical Data on the Modelling of High Pressure Polymerizations
Kristina Zentel and Markus Busch


(245k) Modeling, Simulation and Optimization of Crude Distillation Unit
Subhajit Majumder and Amanpreet Singh


(245l) Design and Development of a High Temperature PEM Fuel Cell System for Charging of Li-Ion Battery Stacks
Chrysovalantou Ziogou, Damian Giaouris, Simira Papadopoulou and Spyros S. Voutetakis


(245m) Dynamic Simulation of a Cryogenic Air Separation Unit
Tong Li


(245n) A Geometric Method to Calculate the Minimum Reflux of Complex Columns Using Enthalpy-Composition Diagram
Angel Castro, José D. Olguin, Arturo Ortiz and Fernando Pérez


(245o) Olefin Furnace System Scheduling with the Consideration of Relay Cracking of Recycled Ethane/Propane
Min Chen, Honglin Qu and Qiang Xu

File available
(245p) Process Design and Optimization for Etherification of Glycerol with Isobutene
Jingjun Liu, Prodromos Daoutidis and Bolun Yang


(245q) Molecular Design of Reactants and Products - a Multi-Objective Approach
Vikrant Dev, Nishanth G. Chemmangattuvalappil and Mario Richard Eden


(245r) How Simulation Based Product Design in High-Pressure Polymerization Technology Leads Back to the Roots of Fundamental Science
Markus Busch


(245s) Deriving Value from Integrating Operations Control and Optimization into Engineering Design
Livia Wiley


(245t) A Semi-Parametric Independent Component Analysis Method for Multivariate Process Monitoring
Taha Mohseni Ahooyi, Jeffrey E. Arbogast and Masoud Soroush


(426c) Sustainable Design for Production of Dimethyl Carbonate from Ethylene Oxide, CO2 and Methanol
Erik Haastrup, Rishika Chatterjee and Nipun Garg


(426d) Achieving a More Sustainable Design for the Production of Di-Methyl Carbonate Via CO2 Utilization
Spardha Jhamb, Dane Hurley, Pawel Sobczyk and Amata Anantpinijwatna


Design for Sustainability


Modeling and Simulation for Industrial Applications


Product Design


Integrated Design and Operations
See more of this Group/Topical: Computing and Systems Technology Division
<< Previous Session | Next Session >>