431855 Solution Processed Inorganic Solar Cells

Wednesday, November 11, 2015: 10:10 AM
251D (Salt Palace Convention Center)
Rakesh Agrawal, School of Chemical Engineering, Purdue University, West Lafayette, IN

Solution Processed Inorganic Solar Cells Rakesh Agrawal

School of Chemical Engineering Purdue University, West Lafayette, Indiana, USA

With the abundant availability of renewable energy from the sun, one can easily obtain all the power needed for society to continue its growth.  What is holding the progress from moving forward is not the capability, but rather the economics.  Thin-film solar cells create one step towards the reduction of costs by utilizing less material, but they have difficulty in scalability especially as the materials of interest turn to more complex compounds including the tertiary chalcopyrites of copper indium gallium selenide (CIGSe), and the low-cost earth abundant quaternary kesterites of copper zinc tin sulfide (CZTS).

To assist in scalability and further decrease costs, we have turned to the development of solution processed solar cells. At this front, we have taken a two prong approach.  In the first approach, we synthesize nanoparticles of candidate compound semiconductors and disperse them in solvents to formulate inks.  In the second approach, we are developing a new chemistry based on amine thiol mixtures to dissolve precursor compounds that could not be earlier dissolved in common solvents to prepare molecular precursor inks.  These inks are then used to print micron thick films on suitable substrates and heat treated to grow large grains suitable for good optoelectronic properties.  Our group is studying the dissolution mechanism for molecular precursors, mechanism for grain growth during annealing under different environments and is characterizing final devices for their optoelectronic performance.  We are also using the solution chemistry to synthesize some new and promising semiconducting materials and their thin films.  Some examples of the semiconducting materials being explored in our lab are: Cu(In,Ga)(S,Se)2, Cu2Zn(Sn,Ge)(S,Se)2, Cu3P(S,Se)4, Cu3As(S,Se)4, ZnSnP2 , SnS etc.

In this talk, we will highlight some of the important findings of our group’s research including fabrication of Cu(In,Ga)(S,Se)2 and Cu2Zn(Sn,Ge)(S,Se)2 solar cells with power conversion efficiencies of 15% and 9.4% respectively.  The excitement of this route’s science and technology from chemical engineering perspective will be presented.

Extended Abstract: File Not Uploaded