Acetophenone hydrogenation on Rh/Al2O3 catalyst: Intrinsic reaction kinetics and effects of internal diffusion
Shinbeom Lee, Zhiyang Yu, Arvind Varma
School of Chemical Engineering, Purdue University, 480 Stadium Mall Drive,
West Lafayette, IN 47907, USA
Acetophenone hydrogenation on 1% Rh/Al2O3 catalyst was conducted using several support sizes to study intrinsic kinetics and internal diffusion effects. In the first part of this work, results on different noble metals and supports were compared, and 1% Rh/Al2O3 was selected. The intrinsic reaction kinetic modeling with Langmuir-Hinshelwood mechanism was conducted based on experiments at 60-100 oC, 1.1-4.1 MPa PH2 and 0.04-0.4 M CAP.owith powder catalysts. The most appropriate kinetic model was composed of dissociative and non-competitive hydrogen adsorption with saturated active sites for organics, as confirmed by reasonable agreement with the literature. The kinetic parameters including activation energies, adsorption heat of hydrogen, and adsorption constants were also compared with the literature. With the obtained reaction kinetic model, the internal diffusion effects were investigated with different sized catalysts and diffusion-reaction models. Catalyst distributions and active sites numbers for larger size supports (0.5 and 2.5 mm diameters) were characterized and applied to the models with modifications for egg-shell distributions and active site differences. The models developed in this work provided good estimates, explaining the effect of internal diffusion inside catalyst particles on reaction rates and selectivities, and are therefore suitable for use in future reactor studies.
Keywords: acetophenone hydrogenation, Rh/Al2O3, intrinsic reaction kinetics, effectiveness factor, slurry reactor
See more of this Group/Topical: Catalysis and Reaction Engineering Division