391854 Steps Towards Achieving Uniform Electrodeposition in Nanoporous Aluminum Oxide Templates

Tuesday, November 18, 2014
Galleria Exhibit Hall (Hilton Atlanta)
Justin C. Wong and Kirk J. Ziegler, Department of Chemical Engineering, University of Florida, Gainesville, FL

Nanowires have garnered much interest in recent years for their potential in increasing performance of devices such as solar cells, thermoelectrics, batteries, and piezoelectrics.  Many methods exist for the fabrication of nanowires, but one of the most promising methods is the use of nanoporous aluminum oxide templates due to its extremely high density and self-ordering through a hexagonal close packed structure.  However, fabricating uniform arrays of nanowires in contact with the conductive aluminum substrate still remains a challenge.  The problems are most evident when a greater degree of control over the electrodeposition into the aluminum oxide templates is needed for applications such as creating catalyst nanoparticles.
A vital part of the template process is removal of the barrier layer between the pore and the underlying substrate. This is needed to establish direct contact from the pores to the substrate. The objective is to remove the barrier without sacrificing the pore walls.  Several methods exist for barrier layer thinning, including stepping down the anodization voltage or ramping down the current.  However, the thinning method will influence the final pore opening, which creates the contact between the pore and aluminum substrate.  In this presentation, different barrier layer thinning techniques will be discussed and their effect on the pore opening process examined.  Both step-down voltage and ramped current methods were used to understand the barrier layer thinning process.  These results were correlated to the amount of pore opening achieved, measured through a combination of chronoamperometry and electrochemical impedance spectroscopy.  Ellipsometry was used to characterize the barrier layer thinning and pore opening processes of the aluminum oxide templates.  Finally, nanowires were grown within these templates to study the effects of different barrier layer thinning and pore opening techniques on nanowire growth and uniformity.  This research provides a comprehensive approach towards fabricating uniform, high-density nanowire arrays.

Extended Abstract: File Not Uploaded
See more of this Session: Poster Session: Nanoscale Science and Engineering
See more of this Group/Topical: Nanoscale Science and Engineering Forum