385977 Development of Associative Small Molecule CO2 Thickeners

Wednesday, November 19, 2014: 4:30 PM
M109 (Marriott Marquis Atlanta)
Jason J. Lee1, Robert Enick1, Eric J. Beckman1, Stephen Cummings1, Robert J. Perry2, Michael O'Brien2, Mark Doherty2 and Aman Dhuwe1, (1)Chemical and Petroleum Engineering, University of Pittsburgh, Pittsburgh, PA, (2)Global Research, General Electric, Niskayuna, NY

The low viscosity of CO2 at typical enhanced oil recovery (EOR) conditions is responsible for a poor mobility ratio that causes viscous fingering and poor sweep efficiency, leading to reduced efficiency and yield. A CO2 thickener could be a game changer in that it would mitigate the unfavorable mobility ratio and reduce or eliminate the need for water alternating gas methods (WAG). The ideal CO2 thickener would be an affordable, safe, water-insoluble additive that could dissolve in CO2 at typical wellhead and reservoir conditions during CO2 EOR and elevate the viscosity of CO2 to a comparable value of the oil. In a distinct petroleum recovery application, a CO2 thickener would allow CO2 to more effectively transport sand into fractures during hydraulic fracturing of tight sands or shales, thereby allowing liquid CO2 (rather than water) to be used for “fracking” in water-sensitive formations.  A brief history of prior attempts to thicken CO2 with either high molecular weight polymers or small associating compounds is presented. Our strategy for designing a novel small molecule, associating, CO2 thickener is then detailed along with phase behavior and viscosity of dilute solutions composed of thickener candidates in CO2. Each thickener candidate is assembled with a CO2-philic segment (e.g. an oligomer or low molecular weight polymer of dimethyl siloxane or propylene glycol) and one or more somewhat CO2-phobic functional groups (e.g. aromatics, hydroxyl aluminum, tin fluoride, carboxylic acid, benzoic acid, hydroxyl groups, amides) that induces associative intermolecular interactions (e.g. aromatic dimerization, hydrogen bonding, organometallic coupling) that can lead to the formation of viscosity-enhancing supramolecular structures in solution. In addition to the small molecule thickening candidates, several new polymeric thickeners based on high molecular weight silicone oils and a new type of environmentally benign polyfluoroacrylate will also be presented.

Extended Abstract: File Not Uploaded
See more of this Session: Thermodynamic and Transport Properties Under Pressure
See more of this Group/Topical: Engineering Sciences and Fundamentals