376873 Low Friction Mesoporous Titanium Dioxide Films Defending Against Escherichia coli

Tuesday, November 18, 2014: 2:35 PM
International 2 (Marriott Marquis Atlanta)
Rong An1,2, Yudan Zhu1, Jiahua Zhu3, Wei Zhuang1 and Xiaohua Lu4, (1)Chemical Engineering, Nanjing Tech University, Nanjing, China, (2)Chemical & Biomolecular Engineering, North Carolina State University, Raleigh, NC, (3)Chemical and Biomolecular Engineering, The University of Akron, Akron, OH, (4)College of Chemistry and Chemical Engineering,State Key Laboratory of Materials-Oriented Chemical Engineering, Nanjing Tech University, Nanjing, China

The geometrical strategy for designing low friction titanium dioxide (TiO2) films that prevent Escherichia coli (E. coli) adhesion has been demonstrated in this study. The results show that settlement and adhesion of E. coli onto mesoporous TiO2 films are significantly low, but high onto dense TiO2. The resistance of mesoporous TiO2 films against E. coli is related to the low friction surface (friction coefficient: 2.5×10-3). There exists a strongly adsorbed “bound water” layer at the bottom of the TiO2 surface, and weakly adsorbed “free water” on the upper layer of the TiO2 surface. The existence of nanostructured pores on the “slippery” low friction mesoporous TiO2 leads to two kinds of contacts for E. coli with the surface. Some of the E. coli have to overcome stronger interactions from the “bound water” layer, but the others just need to overcome lower interactions (14.9 nN) from the weakly adsorbed “free water” on the apex of nanostructured pores. However, on the homogeneous dense TiO2 surface (friction coefficient: 7.1×10-2), stronger interactions (57.4 nN) need to be conquered between all of the E. coli and the strongly adsorbed “bound water” layer on the TiO2 surface. Meanwhile, the E. coli that is strongly attached on the “sticky” dense TiO2 surface cannot easily be removed even by the dynamic rinse process. Therefore, the “slippery” low friction mesoporous TiO2 has been shown to be a suitable surface for defending against the adhesion of E. coli. This is a geometrical approach that guides E. coli adsorption on the mesoporous TiO2 surface with nanostructured pores. Therefore, these studies indicate that biocompatible mesoporous TiO2 exhibits desirable bacteria-resistant properties for use in marine coatings and biomedical fields.

Extended Abstract: File Not Uploaded