281314 Recovery of Iron From Gold Mine Tailings by Decentralized Magnetization Roasting-Magnetic Separation

Tuesday, October 30, 2012
Hall B (Convention Center )
Yanxin Chen1, Yanfei Yao2, Bo Zhao2 and Yong Min1, (1)Xi'an University of Architecture &Technology, Institute of Powder Engineering, Xi'an, China, (2)Xi'an University of Architecture& Technology

Recovery of iron from Gold mine tailings by decentralized magnetization roasting-magnetic separation

CHEN Yan-xin  YAO Yan-fei  JIU Shao-wu  ZHAO Bo  MIN Yong

Xi'an University of Architecture& Technology



Decentralized magnetization roasting-magnetic separation was used to process a sort of gold mine tailings, with the purpose of recycling the iron resources. Tailings was magnetization roasting under the conditions of 850℃, CO volume percentage was 2%, then determined the right roasting time to get roasted ore. Magnetic separation was proceed with orthogonal test, focused on the effect of Magnetic field intensity and the dosage of dispersant and flocculent to concentrate grade and iron recovery. The experimental results indicate that after magnetization roasting under the conditions of  850℃,CO volume percentage was 2%, roasting time was 5min,then proceed magnetic separation at Magnetic field intensity was 900Oe, the dosage of dispersant and flocculent was 0.05g/20g and 0.1128g/20g, a concentrate assaying 57.15% Fe with 81.43% recovery was achieved.

Keywords: Gold mine tailings, Magnetization roasting-magnetic separation, Concentrate grade, Iron recovery

Extended Abstract: File Not Uploaded
See more of this Session: Particle Technology Forum Poster Session
See more of this Group/Topical: Particle Technology Forum