277775 Dynamic Modeling and Control of a Solid-Sorbent CO2 Capture Process with Two-Stage Bubbling Fluidized Bed Adsorber-Reactor

Wednesday, October 31, 2012: 9:00 AM
336 (Convention Center )
Srinivasarao Modekurti, Department of Chemical Engineering, West Virginia University, Morgantown, WV, Debangsu Bhattacharyya, Department of Chemical Engg., West Virginia University, Morgantown, WV and Stephen E. Zitney, AVESTAR Center, National Energy Technology Laboratory, Morgantown, WV

Solid-sorbent-based CO2 capture processes have strong potential for reducing the overall energy penalty for post-combustion capture from the flue gas of a conventional pulverized coal power plant. However, the commercial success of this technology is contingent upon it operating over a wide range of capture rates, transient events, malfunctions, and disturbances, as well as under uncertainties.  To study these operational aspects, a dynamic model of a solid-sorbent-based CO2 capture process has been developed. 

 In this work, a one-dimensional (1D), non-isothermal, dynamic model of a two-stage bubbling fluidized bed (BFB) adsorber-reactor system with overflow-type weir configuration has been developed in Aspen Custom Modeler (ACM). The physical and chemical properties of the sorbent used in this study are based on a sorbent (32D) developed at National Energy Technology Laboratory (NETL). Each BFB is divided into bubble, emulsion, and cloud-wake regions with the assumptions that the bubble region is free of solids while both gas and solid phases coexist in the emulsion and cloud-wake regions. The BFB dynamic model includes 1D partial differential equations (PDEs) for mass and energy balances, along with comprehensive reaction kinetics. In addition to the two BFB models, the adsorber-reactor system includes 1D PDE-based dynamic models of the downcomer and outlet hopper, as well as models of distributors, control valves, and other pressure-drop devices.  Consistent boundary and initial conditions are considered for simulating the dynamic model.  Equipment items are sized and appropriate heat transfer options, wherever needed, are provided. Finally, a valid pressure-flow network is developed and a lower-level control system is designed.

 Using ACM, the transient responses of various process variables such as flue gas and sorbent temperatures, overall CO2 capture, level of solids in the downcomer and hopper have been studied by simulating typical disturbances such as change in the temperature, flowrate, and composition of the flue gas. To maintain the overall CO2 capture at a desired level in face of the typical disturbances, two control strategies were considered–a proportional-integral-derivative (PID)-based feedback control strategy and a feedforward-augmented feedback control strategy. Dynamic simulation results show that both the strategies result in unacceptable overshoot/undershoot and a long settling time. To improve the control system performance, a linear model predictive controller (LMPC) is designed. In summary, the overall results illustrate how optimizing the operation and control of carbon capture systems can have a significant impact on the extent and the rate at which commercial-scale capture processes will be scaled-up, deployed, and used in the years to come.


Extended Abstract: File Not Uploaded
See more of this Session: CO2 Capture, Control and Sequestration I
See more of this Group/Topical: Sustainable Engineering Forum