265451 Thermal Reduction of Magnetically Stabilized Ferrites Under Reduced Pressure

Tuesday, October 30, 2012: 8:30 AM
305 (Convention Center )
Nicholas AuYeung, Ayyoub Mehdizadeh, Fadi Alnaimat, Fotouh Al-Raqom, Benjamin Greek, Kyle Allen, Amey Barde, Rishi Mishra, Nikhil Seghal, Jinchao Lu, Abhishek Singh and James Klausner, Mechanical and Aerospace Engineering, University of Florida, Gainesville, FL

Oxidation of a metal (or metal oxide) by H2O and CO2 followed by a regenerative high temperature thermal reduction of the resulting metal oxide is a promising method for using concentrated solar energy to produce syngas, a precursor for liquid fuels.  For such a process to become viable, the metal oxide material that is formed must have the ability to maintain surface area and retard sintering over thousands of redox cycles.  Previous experiments have already shown that a magnetically stabilized iron-silica porous structure can significantly enhance hydrogen production via oxidation by H2O and chemical reduction by CO at 800˚C. 1

Here, the feasibility of thermally reducing the mixed-metal ferrite structure at temperatures up to 1400˚C under vacuum is investigated.  Reducing the reactor pressure effectively decreases the partial pressure of O2, resulting in a higher extent of reduction than is possible under atmospheric conditions.  Since the need for a diluting inert gas to increase product yield is eliminated, a higher theoretical higher heating value efficiency is possible. 

In addition to laboratory experiments, a reduced pressure solar thermochemical reactor capable of utilizing the novel mixed-metal ferrite structure has been designed.  Results of testing performed using the University of Florida 42 kW solar simulator will be presented. 

[1]Mehdizadeh AM, et al., Enhancement of thermochemical hydrogen production using an iron-silica magnetically stabilized porous structure, International Journal of Hydrogen Energy (2012), doi:10.1016/j.ijhydene.2012.02.189


Extended Abstract: File Not Uploaded