260188 Investigation of Falling Liquid Film Flow On Multi-Baffled Plate

Tuesday, October 30, 2012: 2:38 PM
413 (Convention Center )
Bo Sun, State Key Laboratory of Chemical Engineering, TianJin University, Tianjin, China, Ming Zhu, East China Engineering Science and Technology CO., LTD, hefei, China, Botan Liu, State Key Laboratory of Chemical Engineering , Tianjin University, Tianjin, China, Chunjiang Liu, State Key Laboratory of Chemical Engineering, Tianjin University and Xigang Yuan, State Key Laboratory of Chemical Engineering, Tianjin University, Tianjin, China

Falling liquid film flow accompanied by mass transfer is a common phenomenon in chemical processes, such as distillation and absorption. And it is found that different flow patterns of falling liquid film lead to different mass transfer efficiency. By changing the detailed configuration of corrugated sheet of structured packing, flow patterns of the falling liquid film flow on the packing can be changed. In this paper, a novel structured packing on which the liquid film flow with a new kind of flow pattern is proposed and mass transfer experiment demonstrate that the packing has a high mass transfer efficiency.

However, the complicated structure of the packing limits a deeply understanding of the mass transfer mechanism. So a simplified model called multi-baffled plate is proposed with the similar hydrodynamic characteristic. Based on the proposed model, experiment and numerical simulation are carried out with isopropanol desorption process on multi-baffled and ordinary plate respectively. Experimental results show that the mass transfer efficiency of multi-baffled configuration is about 50% higher than that of ordinary plate.

In order to investigate the detailed structure of the flow and mass transfer behavior, Computational Fluid Dynamics (CFD) model based on Volume of Fluid (VOF) method is developed, and marangoni effect induced by mass transfer is considered in the model. On the basis of the simulation results, it can be concluded that there are two important factors leading to the higher mass transfer efficiency on the multi-baffled plate. Firstly, the renewal rate is increased accompanied by vortices near the liquid film. When the liquid film flows across the junction of two baffles, the surface flow on the upstream plate is turned to be the bottom flow on the downstream plate, and the bottom flow on the upstream plate is turned to be the surface flow on the downstream plate. Secondly, flow instability is increased in the condition of the changing of flow direction at the junction of two baffles. Based on the reasons above, the mass transfer efficiency on the multi-baffle plates is increased.

Extended Abstract: File Not Uploaded
See more of this Session: Fundamental Research in Transport Processes
See more of this Group/Topical: Engineering Sciences and Fundamentals