Effects of Radioactivity On Surface Interaction Forces

Monday, October 17, 2011
Exhibit Hall B (Minneapolis Convention Center)
Costas Tsouris1, Joanna McFarlane1, Hyojin Kweon2, Sotira Yiacoumi3 and Ida Lee4, (1)Energy and Transportation Science Division, Oak Ridge National Laboratory, Oak Ridge, TN, (2)Civil & Environmental Engineering, Georgia Institute of Technology, Atlanta, GA, (3)School of Civil and Environmental Engineering, Georgia Institute of Technology, Atlanta, GA, (4)Electrical Engineering and Computer Science, University of Tennessee at Knoxville, Oak Ridge

Explosion of radiological devices is expected to generate radiological debris.  Transport and distribution of this debris in the surrounding environment is of great concern with regard to understanding the environmental and health risks and devising methods to reduce these risks.  Current tests and analyses of radioactive-particle plumes do not take into consideration the possibility that radioactive particles may behave differently than “cold” particles.  Radioactive particles can become electrostatically charged as a result of the decay process.  A theory has been proposed to describe this self-charging phenomenon, which may have a significant effect on how these particles interact with one another and with charged surfaces in the environment.  In this study, atomic force microscopy (AFM) is employed to quantify surface forces between a particle and a planar substrate and to compare measurements with and without the involvement of radioactivity.  The main objective of the study is to assess directly the effects of radioactivity on the surface interactions of radioactive aerosols via the measurement of the adhesion force and the surface potential.  The adhesion force between (i) a silicon nitride AFM tip and an activated gold substrate and (ii) between a radioactive particle attached onto the AFM cantilever and a planar substrate is measured so that any possible effects due to radioactivity can be observed.  Preliminary experiments have shown that the adhesion force between the tip and the gold surface increases significantly when the gold substrate is activated to a certain level.

Extended Abstract: File Not Uploaded
See more of this Session: Poster Session: Interfacial Phenomena
See more of this Group/Topical: Engineering Sciences and Fundamentals