Scalable Synthesis of Palladium Nanoparticle Catalysts by Atomic Layer Deposition

Tuesday, October 18, 2011: 9:12 AM
200 A (Minneapolis Convention Center)
Xinhua Liang1, Lauren Blinn2, Brittany Michael1 and Alan W. Weimer1, (1)Chemical and Biological Engineering, University of Colorado at Boulder, Boulder, CO, (2)Chemical Engineering, University of Florida, Gainesville, FL

Atomic layer deposition (ALD) was used to produce Pd/Al2O3 catalysts using sequential exposures of Pd (II) hexafluoroacetylacetonate and formalin at 200 °C in a fluidized bed reactor. The ALD prepared Pd/alumina catalysts were characterized by various methods including hydrogen chemisorption, XPS and TEM, and compared with a commercially available 1 wt.% Pd/alumina catalyst, which was also characterized. The content of Pd on alumina support and the size of Pd nanoparticles can be controlled by the number of ALD coating cycles and the dose time of the Pd precursor. One layer of organic component from the Pd precursor remained on the Pd particle surface. The oxidized/reduced ALD 0.9 wt.% Pd/alumina had greater active metal surface area and percent metal dispersion than the commercial 1 wt.% Pd/alumina catalyst. The ALD and commercial catalysts were subjected to catalytic testing to determine their relative activities for glucose oxidation to gluconic acid in aqueous solution. The ALD 0.9 wt.% Pd/alumina catalyst had comparable activity as compared to the commercial 1 wt.% Pd catalyst. No noticeable amount of Pd leaching was observed during the vigorously stirred reaction. ALD can be an efficient method for the preparation of highly dispersed noble metal nanoparticles.

Extended Abstract: File Not Uploaded
See more of this Session: Nanostructured Particles for Catalysis
See more of this Group/Topical: Particle Technology Forum