Session: Meet the Faculty Candidate Poster Session (2010 Annual Meeting)

Meet the Faculty Candidate Poster Session

Sunday, November 7, 2010: 2:00 PM

Hall 1 (Salt Palace Convention Center)

Description:

This session provides an opportunity for candidates interested in faculty positions to interact with potential search committee members. To participate, you need to submit an abstract that contains sufficient information regarding you, your research interests and your potential as a candidate. It is strongly encouraged that you should mention in your cover letter that you are participating in this session while you are applying to faculty positions.

Sponsor:

Education

Chair:

Tyler Johannes
Email: johannes@utulsa.edu

Co-Chair:

Sundararajan V. Madihally
Email: sundar.madihally@okstate.edu

- indicates paper has an Extended Abstract file available on CD.

(4a) Surface Functionalization of Nanomaterials to Elicit "Smart" Properties
Allan E. David and Victor C. Yang

(4aa) Chemical Looping Strategy and Its Commercial Potential for Carbon Negative Energy Conversions
Fanxing Li and L. - S. Fan

(4ab) Fabrication and Evaluation of Omniphobic Surfaces for Liquid Repellency and Reduced Ice Adhesion
Adam J. Meuler

(4ac) Atmospheric Organic Particulate Matter: Measurements, Models and Mitigation
Lea Hildebrandt

(4ad) One- and Two-Probe Nonlinear Microrheology: Normal Stress Differences, Osmotic Pressure, and Nonequilibrium Depletion Flocculation
Roseanna N. Zia

(4ae) Regulation of Stem Cell Behavior by Biomimetic Microenvironment Created with Polymer Nanoengineering
Yong Yang

(4af) Biosynthesis of Fungal Resorcylic Acid Lactones
Hui Zhou and Yi Tang

(4ag) Rational Design of the Heterogeneous Catalysts and Their Opportunities in Renewable Fuels
Wenqin Shen, Gerald Huffman, Goeff A. Tompsett, W. Curtis Conner Jr. and George W. Huber

(4ah) Process and Catalysis Development for Sustainable Fuels Production
Andrew A. Peterson, Jefferson W. Tester and Jens K. Nørskov

(4ai) Statistical Process Inference, Control and Engineering (SPICE)
Kris Villez

(4aj) Synthetic Biomaterials for Enhancing the Delivery and Effectiveness of DNA-Based Therapeutics
Christopher M. Jewell

(4ak) A Full-Chain Stochastic Tube Model for Entangled Polymeric Liquids: Improvement for Extended Applications
Joontaek Park, David W. Mead and Morton M. Denn

(4al) Rational, Model-Guided Design and Experimental Evaluation of Targeted Drug Delivery Vehicles
Derek W. Bartlett

(4am) De-Oxygenation Catalysis On Titania for Renewable Fuel Applications
Prashant Reuben Daggolu

(4an) Engineering the Yeast Saccharomyces Cerevisiae for Drug Discovery and Bioenergy Applications
Michelle A. O'Malley, Anne Skaja Robinson and Chris A. Kaiser

(4ao) Machine Learning: Extracting Research Pathways From Nanoscale Phenomena
Andres F. Hernandez Moreno

(4ap) Targeted Nanoparticles for Systemic Delivery of Therapeutic Agents to Solid Tumors in Animals and in Humans
Chung Hang J. Choi and Mark E. Davis

(4aq) A Property Based Approach for Simultaneous Process and Molecular Design
Nishanth Chemmangattuvalappil and Mario Richard Eden

(4ar) Design of Novel Artificial Allosteric Proteins and Their Applications
Jingjing Li and David W. Wood

(4as) Analysis and Control of Self-Assembling Nucleic Acid Systems
Victor A. Beck

(4at) Synthesis of Multifunctional Nanoparticles for Cancer Imaging, Diagnostics and Therapy
Yun Wu and L.James Lee

(4au) Multiscale Chemical Product Design Using the Reverse Problem Formulation
Charles C. Solvason and Mario Richard Eden

(4av) Microfluidic Three-Dimensional in Vitro System Enabling An Information-Rich Assay to Investigate Breast Cancer Progression
Kyung Eun Sung, Ning Yang, Carolyn Pehlke, Patricia J. Keely, Kevin W. Eliceiri, Andreas Friedl and David J. Beebe

(4aw) Development of a FRET-Based Tension Sensor for Measuring Forces Across Proteins in Living Cells
Brenton D. Hoffman

(4ax) Exploiting Immune Function and Response for Biopharmaceutical Engineering
Sai T. Reddy

(4ay) A Fresh Look at Nanomaterials, Energy, and the Environment
Ludovico Cademartiri

(4az) Computational Methods and Research in Chemical Engineering
Eric L. Maase

(4b) Cybernetic Modeling for Metabolic Engineering and Reactor Optimization
Hyun-Seob Song

(4ba) Molecular Mobility in Non-Linear Optical Glassy Chromophores
Daniel B. Knorr Jr.

(4bb) Multiscale Simulation to Advance Micellar Drug Delivery
Sharon M. Loverde

(4bc) Methods for Assessing Biocompatibility and the Foreign Body Response of Polymers and Drug Delivery Systems
Kaitlin M. Bratlie

(4bd) Environmental Perspectives On the Interactions of Nanomaterials and Microorganisms
Teresa L. Kirschling

(4be) Molecular Motions of the Beta Relaxation and Glassy Biomolecular Preservation
David S. Simmons, Marcus T. Cicerone and Jack F. Douglas

(4bf) Development of Hydrogel-Based Kinase Assay for Monitoring Cancer and Developing Patient-Specific Treatments
Gargi Ghosh

(4bg) Nano-Biomaterials: Sensors, Fuel Cells and Robust Hybrid Composites Using Room-Temperature CVD
Gautam Gupta

(4bh) Engineering Materials for Biomedical and Automotive Applications
Holly J. Martin

(4bi) Molecular Modeling of Biological Interfaces
Mark J. Uline

(4bj) Silicon-Carbon Anode with Improved Structural Integrity for Lithium-Ion Batteries and Sulfur Cathode Encapsulated in Hollow Carbon Nanostructures for Lithium-Sulfur Batteries
Juchen Guo and Chunsheng Wang

(4bk) Coarse-Grained Modeling of Polymers for Energy Applications
Lisa M. Hall

(4bl) Predictive Kinetics for Chemical Engineering
Richard H. West

(4bm) Phase Behavior of Polymer/Nanoparticle Blends near a Substrate
Venkat Padmanabhan, Michael E. Mackay, Amalie L. Frischknecht and Sanat Kumar

(4bn) Sustainable Materials: From Energy Storage to Biomaterials and New Opportunities in Chemical Engineering Research
Santanu Kundu

(4bo) Systematic Design, Implementation and Evaluation of Vitrification as a Preservation Method for An Encapsulated Cell System
Alison Lawson and Athanassios Sambanis

(4bp) Nanocomposite Sorbents for High Efficiency CO2 Capture
Genggeng Qi

(4bq) Soft and Biological Material Odes: Optics, Dynamics, Elasticity-Extensibility, and Self-Assembly
Vivek Sharma

(4br) Fundamentals of Gene Delivery From Tissue Engineering Scaffolds
Misael O. Aviles

(4bs) Systems Engineering for Sustainability
Arun Giridhar

(4bt) Membrane and Catalyst Degradation in Polymer Electrolyte Fuel Cells
Panagiotis Trogadas

(4bu) Rational Design of Advanced Organic Materials
Richard A. Lawson and Clifford L. Henderson

(4bv) Tailoring Structure, Thermodynamics, and Rheology in Surfactant-Colloid Mixtures for Soft Material Design
Matthew E. Helgeson, Eric W. Kaler, Norman J. Wagner and Patrick S. Doyle

(4bw) Solid Polymer Electrolytes Derived From Ionic Liquids: From Synthesis to Applications
Yuesheng Ye

(4bx) First Principles Study of the Photodynamics of Oxidized Silicon Clusters
Benjamin G. Levine

(4by) Convective Assembly of Nanoparticles Into Thin Structured Films
J. Alex Lee and Michael Tsapatsis

(4bz) Biorheology with Applications - Adhesive Wall Climbing, Bacterial Motility, and Predatory Defense
Randy H. Ewoldt

(4c) Cancer Metastasis: Deconstructing Cell Motility On Micropatterned Islands and Tracks
Goher Mahmud

(4ca) Systems Biology Approaches to Study Metabolism In Tumors and Stem Cells
Christian M. Metallo

(4cb) High-Throughput Microrheology of Therapeutic Hydrogelators
Kelly M. Schultz and Eric M. Furst

(4cc) Novel Material Design through Multiscale Numerical and Analytic Approaches
Erin Lennon

(4cd) Biointerfacial Science and Engineering: From the Fundamental to the Applied
Roger L. York

(4ce) Computational Molecular Science: Designing Improved Materials for Applications in Energy, Pharmaceutics and Desalination
Amish J. Patel

(4cf) Use DNA to Probe the Molecular Deformation at Micro/Nanoscale and Design Novel Nanochip Devices for Drug/Gene Delivery and Biosensing
Pouyan E. Boukany

(4cg) Combining Molecular Level Insights with Advanced Synthesis Strategies to Design (Photo)Catalytic Materials: Efficient Chemical Processing Utilizing Thermal and Solar Stimuli
Phillip Christopher and Suljo Linic

(4ch) From Materials to Peptide Design: a Short Trip through Computational Techniques
Diego A. Pantano

(4ci) Quantitative Engineering Approach to Particle and Particulate System Design
Defne Kayrak-Talay and James D. Litster

(4cj) Bio-Inspired, Smart and Functional Systems through Reaction-Diffusion-Convection Processes
Siowling Soh and Bartosz Grzybowski

(4ck) Binary Combinations of Lipid-Like Materials Act Synergistically to Improve siRNA Delivery in Vitro and In Vivo
Kathryn A. Whitehead, George Z. Li, Kevin Love, Robert Langer and Daniel G. Anderson

(4cl) Exploring Interfacial Phenomena in Organic Photovoltaic Devices Using Block Copolymers
Bryan W. Boudouris and Rachel A. Segalman

(4cm) Rational Design of Photo-(Electro-)Catalysts: A Combined Theoretical/Experimental Route to Solar Fuels
David B. Ingram and Suljo Linic

(4cn) Assembly, Manipulation, and Controlled Release of Complex Nanocolloids by Dielectrophoresis
Victoria Froude

(4co) Interfacial Forces in Nanoparticle and Biological Systems at the Micro- and Nano-Scales
Kai Kristiansen

(4cp) Multicompartmental Microstructures Via Electrohydrodynamic Co-Jetting for Biomedical Applications
Srijanani Bhaskar and Joerg Lahann

(4cq) Spatiotemporal Signaling During Cell Adhesion and Migration: Computational Models and Experimental Analysis
Erik S. Welf

(4cr) Computational High-Throughput Screening of Sorbents for Regenerable CO2 Capture at High Temperature
Ujjal Das and William H. Green

(4cs) Engineering Proteins and Peptides for the Investigation and Treatment of Infectious Disease
Amy J. Karlsson

(4ct) Algal Derived Biofuels: A Systems Biology Approach to Increasing TAG Accumulation in C. Reinhardtii
Nanette R. Boyle, John A. Morgan and Sabeeha S. Merchant

(4cu) Molecular Understanding and Design of Zwitterionic Biomaterials for Lubrication, Cartilage Tissue Repair and Drug Delivery Applications
Yi He and Shaoyi Jiang

(4cv) Synthetic Extracellular Matrix (ECM) Hydrogels and Localized Gene Delivery for Stem Cells and Tissue Regeneration
Yuguo Lei

(4cw) Molecular Simulation Investigation Into Nucleation and Growth of Complex Structures
Sapna Sarupria

(4cx) • Probing Equilibrium Phase Behavior of Asymmetric Block Copolymer Thin Films
Vindhya Mishra, Glenn H. Fredrickson and Edward J. Kramer

(4cy) Controlled Release Films and Functional Surfaces for Applications in Medicine
Anita Shukla and Paula Hammond

(4cz) Utilization and Modification of Municipal Sewage Treatment Plant Sludge and Wastewater Streams for the Production of Lipid-Based Biofuels
Andro Mondala

(4d) Viral Peptide Isolated From the Hepatitis C Virus (HCV): Interactions with Lipid Assemblies and Biotechnological Applications
Nam-Joon Cho

(4da) Carbon Nanotubes as Optical Sensors and Polymeric Biomaterials
Daniel A. Heller

(4db) Engineering in the Microvasculature: The Mechanical Microenvironment's Control of Systemic Metabolism
Joseph M. Rutkowski

(4dc) Polymers for Advanced Energy Technologies
Daniel T. Hallinan Jr.

(4dd) Mercury Reaction Chemistry in Combustion Flue Gases From Experiments and Theory
Bihter Padak

(4de) Engineering Nanostructured Materials for Green Energy
Sunho Choi

(4df) Design of Delivery Systems for Nanomedicine through Self-Assembly
Hitesh G. Bagaria

(4dg) Ultrafast Dynamics of Complex Fluid Interfaces
Valeria Garbin

(4dh) Metabolic Engineering for the Production of Biofuels and Chemicals
Patrick Suthers

(4di) Biologic Conversion of Waste Streams to Renewable Fuel Sources
Sage R. Hiibel

(4dk) Ventures in Biofabrication: From Biological Nanofactories to Miniaturized Tools for Medicine
Rohan Fernandes

(4dl) Photodegradation and Recovery of Pollutants in Aqueous Systems Using Magnetic Nanoparticles Coated with Photocatalyst Materials
Adriana P. Herrera

(4dm) High Throughput Polymer-Array Technology for Stem Cell Engineering
Ying Mei

(4dn) Developing the Next Generation of Tools for the Study of Nucleation and Metastability in Liquids
Claudiu A. Stan

(4do) Nano Materials for Energy Storage Applications
Surya Sekhar Moganty

(4dp) Understanding Transport Processes in Electrokinetics through Applied Mathematics: Challenges and Opportunities
Jennifer Pascal and Pedro Arce

(4dq) Closing the Carbon Cycle for Sustainable Energy and Environment:CO2 Capture Using Nanoparticle Ionic Materials (NIMs) and Methane Recovery in Clathrate Hydrates with Integrated Carbon Storage
Youngjune Park and Ah-Hyung Alissa Park

(4dr) Nanocatalysis for Aqueous Processing of Biomass Derived Feedstocks
Xiaoming Wang

(4ds) Sorption and Oxidation of Mercury in Flue Coal-Fired Power Plants
Erdem Sasmaz

(4dt) Reprogramming Human Somatic Cells to Pluripotency for Disease Modeling and Therapy
Krishanu Saha

(4du) Novel Polymeric Materials for Bioanalytical Separations and Microfluidic Systems for in Situ Detection of Organic Biomarkers of Extant or Extinct Life On Mars
Thomas N. Chiesl, Annelise E. Barron and Richard A. Mathies

(4dv) DNA Separation Using Nanoscale Organic Hybrid Materials
Henry W. Lau and Lynden A. Archer

(4dw) Nanoengineered Materials for Sensing and Energy Conversion
Carlos Hangarter

(4dx) Design of Respiratory Nanoparticle Delivery Vehicle and Evaluation of Cellular Toxicity
Timothy Brenza

(4dy) Atom-by-Atom Metrology of Materials for Microelectronics, Energy and Biology
Domingo Ferrer and Sanjay K. Banerjee

(4dz) Networked and Distributed Predictive Control: Enabling Smart Manufacturing and Smart Renewable Energy Generation
Jinfeng Liu and Panagiotis Christofides

(4e) Surface and Interface of Soft Materials
Wei Zhang

(4ea) Zeolite Films and Membranes for Computer Microprocessors and Biofuel Production
Christopher M. Lew, Yushan Yan and Michael Tsapatsis

(4eb) Remembering Kinetics: Studying the Dynamic Protein Activations and Protein Regulations That Form the Molecular Basis of Learning and Memory
Tamara L. Kinzer-Ursem

(4ec) Biochemical Engineering of Cancer Immunotherapeutics
Susan Napier Thomas

(4ed) Investigating Case II and Anomalous Penetrant Transport in Glassy Polymers
Adam K. Ekenseair and Nicholas A. Peppas

(4ee) Development of Novel Components for Next-Generation Microfluidic Systems
Minsoung Rhee

(4ef) Chemical Descriptors and Quantitative Structure Activity Relationships for Catalyst and Materials Design
Thomas A. Manz

(4eg) Multiscale Modeling of Biomimetic Nanostructures
Dina T. Mirijanian

(4eh) Interrelations Between Morphology and Rheological Properties of Microstructured Polymer Blends During Coarsening
Carlos R. López-Barrón

(4ei) Novel Design of Gene/Drug Delivery Systems by Virus-Polymer Hybrid
Kye Il Joo

(4ej) Bio-Inspired Energy Systems and Programmable Materials
Ian Wheeldon

(4f) Zwitterionic/Mixed Charge Polymers as Next-Generation Biomaterials
Zhiqiang Cao and Shaoyi Jiang

(4g) Novel Biomaterials for Immunotherapy Applications
Samantha A. Meenach

(4h) Designing Materials for Energy Applications Using Insights From Molecular Simulation
Rachel B. Getman

(4i) Designing Bio-Nano Materials through Modeling and Simulation
Meenakshi Dutt

(4j) Directed Catalytic Materials Design through a Combined Theoretical and Experimental Approach
Siris Laursen

(4k) Advanced Membrane Materials for Refinery Separations by Pervaporation
Claudio P. Ribeiro Jr. and Benny D. Freeman

(4l) Sustainable Biomass Feedstock Production for Bioenergy: Is It Possible and How Will It Happen?
Yogendra Shastri

(4m) Advanced Dynamic Optimization and Control for Large-Scale Systems
Rui Huang

(4n) Lasers, Electrons and Nanotubes: A Roadmap to Affordable Solar Technology
Christiaan Richter

(4o) Chemical Modification of Stem Cell Membranes for Targeted Delivery of Cells and Therapeutics
Hao Cheng, Marta Byrska, Christian J. Kastrup, Robert Langer and Daniel G. Anderson

(4p) Dynamic Relaxation Characteristics of Polymer Nanocomposites and Aromatic Polyimides
Anthony C. Comer

(4q) Nanoparticle-Based Thin Films for Tribology Control in MEMS
Kendall M. Hurst, Christopher B. Roberts and W. Robert Ashurst

(4r) Multiscale Modeling of Biophysical and Biochemical Aspects of Viral Life Cycles
Eric R. May

(4s) Development and Characterization of Remendable Polymer Composites Using the Diels-Alder Reaction
Amy M. Peterson

(4t) Systems and Synthetic Biology in Bacterial and Human T-Cells
Wilson W. Wong, James C. Liao and Wendell Lim

(4u) Electronic Tools for Student Engagement in Introductory Engineering
Joshua A. Enszer

(4v) Evaluating Zero Valent Iron Nanoparticles with Acoustic Resonance Microbalance Techniques
Lauren F. Greenlee

(4w) Thermochemical Water Splitting Using Ionic Liquid Solvents
Nicholas AuYeung, Alex Yokochi, Victoria Johnson and Sardar Sardari

(4x) Quenched Electrostatic Assembly of Colloidal Trimers
Joseph J. McDermott, Neetu Chaturvedi and Darrell Velegol

(4y) Modeling and Simulation of Soft Materials for Energy and Biomimetic Applications
Pratyush Dayal

(4z) Engineering Biomaterials for Regenerative Medicine: Elucidation of Factors That Regulate Stem Cell Fate
Randolph Ashton

See more of this Group/Topical: Education

<< Previous Session | Next Session >>