Preliminary Program subject to change
18J04 Carbon Sequestration II
OverviewThis session will concentrate on new or improved methods of CO2 capture from advanced power systems and large industrial plants that can significantly reduce CO2 capture costs and associated energy requirements. Capture/separations from these large stationary point sources can involve post-combustion or pre-combustion techniques as well as oxy-combustion to produce a near pure stream of CO2. These session will deal not only with the capture of CO2 from flue gas, fuel gas, or other streams, but also with the behavior and interactions of CO2 after it has been injected into a geologic formation.
Primary SponsorResearch and New Technology Committee (18j)
Co-Sponsor(s)Fuels and Petrochemicals Division (16)

Chair

Henry W. Pennline
Research Chemical Engineer
U.S. Department of Energy
National Energy Technology Laboratory
P O Box 10940
626 Cochrans Mill Road
Pittsburgh, PA 15236
Phone Number: 412-386-6013
Fax Number: 412-386-4542
Email: Henry.Pennline@netl.doe.gov

CoChair

Evan J. Granite
Research Group Leader
United States Department of Energy
National Energy Technology Laboratory
PO Box 10940
M/S 58-106
Pittsburgh, PA 15236-0940
Phone Number: 412-386-4607
Fax Number: 412-386-6004
Email: evan.granite@netl.doe.gov

CoChair

Patrick M. Findle
Senior Energy Advisor, SAIC/RDS
National Energy Technology Laboratory
U.S. Department of Energy
Pittsburgh, PA 15236
Phone Number: 412-386-5004
Email: patrick.findle@sa.netl.doe.gov

CoChair

Rameshwar D. Srivastava
Principal Engineer, SAIC
Science Applications International Corporation, National Energy Technology Laboratory
626 Cochrans Mill Road
P.O. Box 10940
Pittsburgh, PA 15236
Phone Number: 412-386-4473
Fax Number: 412-386-4604
Email: ram.srivastava@sa.netl.doe.gov
The Role of Power Generation Technology in Mitigating Global Climate Change
Frank Princiotta, Office of Research of Development, USEPA, Research Triangle Park, NC
Vacuum Swing Adsorption Cycles for Carbon Dioxide Capture from Flue and Stack Gases
James A. Ritter, Amal Mehrotra and Armin D. Ebner, Department of Chemical Engineering, University of South Carolina, Columbia, SC
Metal Organic Frameworks for Carbon Dioxide Capture
Annabelle I. Benin1, John J. Low2, Syed Faheem1, Antek G. Wong-Foy3, Kyoungmoo Koh3, Adam J. Matzger3, A. Ozgur Yazaydin4, Randall Q. Snurr4, Stefano Brandani5, Jian Liu6, M. Douglas LeVan6 and Richard R. Willis1, (1)New Materials Research, UOP LLC, a Honeywell Company, Des Plaines, IL, (2)Advanced Characterization, UOP LLC, a Honeywell Company, Des Plaines, IL, (3)Department of Chemistry, University of Michigan, Ann Arbor, MI, (4)Department of Chemical & Biological Engineering, Northwestern University, Evanston, IL, (5)School of Engineering and Electronics, University of Edinburgh, Edinburgh, United Kingdom, (6)Department of Chemical Engineering, Vanderbilt University, Nashville, TN
Economic CO2 Capture with Solid Sorbents
James C. Fisher II and Steven S.C. Chaung, Chemical Engineering, University of Akron, Akron, OH
A Generic Analysis of Energy Use and Solvent Selection for CO2 Separation from Post-Combustion Flue Gases
Yongqi Lu1, Shiaoguo Chen2 and Massoud Rostam-Abadi1, (1)Energy and Environmental Engineering, Illinois State Geological Survey, Champaign, IL, (2)Science Applications International Corporation, Pittsburgh, PA
Evaluation of Ionic Liquids as Novel Post-Combustion Carbon Dioxide Capture Solvents
Edward J. Maginn1, JaNeille K. Dixon1, Elaine Mindrup1, Wei Shi2, Joan F. Brennecke3 and William F. Schneider3, (1)Chemical and Biomolecular Engineering, University of Notre Dame, Notre Dame, IN, (2)Chemical and Biomolecular Engineering, Univ. of Notre Dame, Notre Dame, IN, (3)University of Notre Dame, Notre Dame, IN
Performance Evaluation of Aqueous Ammonia Process for CO2 Capture
Jong-Nam Kim1, Kwang Bok Yi1, You Jeong Kim2, Chang Hyun Ko1, Jong-Ho Park1 and Won Hi Hong2, (1)Korea Institute of Energy Research, Daejeon, South Korea, (2)KAIST, Daejeon, South Korea

Liaison Functions