| Preliminary Program subject to change |
| 12B01 Tools and Best Practices in Pilot Plants - II |
| Success and effectiveness of a pilot plant program can be highly dependent upon tools and methodologies employed. This general session on the theme of pilot plants seeks to present views and examples of best practices and strategies for pilot plant programs, including scale-up and scale-down, continuous or staged pilots, use of tollers or outside vendors, use of specialized in situ or off-line analysis tools, or other tricks that make-or-break the effectiveness of the program. |
| Pilot Plants (12b) |
Chair
Joseph B. Powell
Chief Scientist - Chemical Engineering
Chemical Process Technology
Shell Global Solutions US Inc.
Westhollow Technology Center
P. O. Box 1380
Houston, TX 77251-1380
Phone Number: 281-544-8976
Fax Number: 281-544-7370
Email: joe.powell@shell.com
CoChair
David C. Attride
Senior Research Associate
Eastman Chemical Company
200 S. Wilcox Dr.
Kingsport, TN 37662
Phone Number: 423-229-2692
Email: dattride@eastman.com
|
| Introductory Remarks |
In Situ Mid-Infrared Spectroscopy as a Tool in the Development of a Continuous Process for the Production of Cyclopropylcarbonitrile
Norma L. Buchanan, Technology Department, Eastman Chemical Company, P.O. Box 1972, Kingsport, TN 37662-5150 |
Real Time Measurement of Propylene Oxide in Polyether Polyols Via Calorimetry
Paul Weider, Process Development, Shell Global Solutions US Inc., Westhollow Technology Center, 3333 Highway 6 South, Houston, TX 77082 |
Ethylene Oxide Hydroformylation in Expanded Solvents
Joseph B. Powell, Chemical Process Technology, Shell Global Solutions US Inc., Westhollow Technology Center, P. O. Box 1380, Houston, TX 77251-1380 |
Safe Use of Microwaves in Chemical Processing
David C. Attride, Eastman Chemical Company, 200 S. Wilcox Dr., Kingsport, TN 37662 |
Design and Operation of a Pilot Plant for Studies on Scaleup, Liquid Distribution, Liquid Holdup, Hydraulics, Heat and Mass Transfer, and Carbon Dioxide Removal Using Chemical Solvents
Damaraju P. Rao1, Kaushik Majumdar2 and Srikanth Kandkuri2, (1)Chemical Engineering Department, Indian Institute of Technology(Delhi), Hauz Khas, New Delhi, India, (2)Chemical Engineering, Indian Institute of Technology(Delhi), Hauz Khas, New Delhi, India |
| Concluding Remarks |
|