Preliminary Program subject to change
01F03 Materials Synthesis and Processing with Compressed or Supercritical Fluids I: General
OverviewThis session invites contributions that relate to the use of gas expanded liquids, near-critical, or supercritical fluids to produce materials with new or enhanced properties. This includes, but is not limited to, papers on formation of particles, films, coatings, and composite materials, using techniques such as rapid expansion, anti-solvent precipitation, fluidization, and dispersion and impregnation using supercritical fluids. Papers are encouraged that describe developments in experimental technique, developments in process characterization and instrumentation technologies, and advances in theoretical modeling and understanding of the processes.
Primary SponsorHigh Pressure (01f)

Chair

Christopher L. Kitchens
Assistant Professor
Department of Chemical and Biomolecular Engineering
Clemson University
127 Earle Hall
Clemson, SC 29634-0909
Phone Number: 864-656-5419
Email: ckitche@clemson.edu

CoChair

Steve J. Tallon
Industrial Research Ltd
Box 31-310
Lower Hutt, NZ
New Zealand
Phone Number: 64 4 9313005
Email: s.tallon@irl.cri.nz
Ethlene Grycol Di-Stearate (EGDS) Micrometer Size Crystal Formation by Using Supercritical CO2
Hiroshi Inomata1, Kazunori Kashiwagi2, Masaki Ota2 and Yoshiyuki Sato2, (1)Chemical Engineering, Tohoku University, 6-6-11-404, Aoba, Aramaki, Aoba-ku, Sendai, 980-8579, Japan, (2)Chemical Engineering, Tohoku University, 6-6-11-403, Aoba, Aramaki, Aoba-ku, Sendai, 980-8579, Japan
Indirect Evidence of Accumulation of Carbon Dioxide at Buried Interfaces near the Critical Pressure
Bryan D. Vogt and Xinxin Li, Department of Chemical Engineering, Arizona State University, Tempe, AZ 85287
Nano-Composites Manufactured by the Use of Compressed Carbon Dioxide
Stefan Pollak1, Marcus Petermann2, Sabine Kareth3 and Andreas Kilzer3, (1)Chair for Particle Technology and Particle Design, Ruhr-University Bochum, Universitaetsstr. 150, IB 6/126, Bochum, 44801, Germany, (2)Chair for Particle Technology and Particle Design, Ruhr-University Bochum, Universitaetsstr. 150, IB6/126, Bochum, 44801, Germany, (3)Chair for Process Technology, Ruhr-University Bochum, Universitaetsstr. 150, IB 6/126, Bochum, 44801, Germany
Polymorphic Transformations and Gelation of Polymers in Dense Fluid Mixtures: Isotactic Poly(4-methyl-1-pentene) and Syndiotactic Polystyrene
Jian Fang, Chemical Engineering, Virginia Tech, 132 Randolph Hall, Blacksburg, VA 24061 and Erdogan Kiran, Virginia Tech, 132 Randolph Hall, Blacksburg, VA 24061
Synthesis of Titania Photocatalyst In Supercritical CO2: Effect of Metallic Precursor and Hydrolysis Reactant
Esther Alonso, Irene Montequi and Mª José Cocero, Chemical Engineering & Environmental Technology, Universidad de Valladolid, Facultad de Ciencias, Prado de la Magdalena sn, Valladolid, Spain

Engineering Sciences and Fundamentals