Mass Transfer Performance of Packed Beds Containing a Modular Catalytic Structured Packing: Model Vs. Experiment
Zarko Olujic, Process & Energy, Delft University of Technology, Leeghwaterstraat 44, Delft, 2628 CA, Netherlands and Marcel Behrens, Packaged Gases Technology, COE, Air Products Management S.A./N.V., Houtemsesteenweg 20, Vilvoorde, 1800, Belgium |
Towards Further Contribution to Reduction of CO2 Emissions by An Ideal
Masaru Nakaiwa, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology, AIST Tsukuba Central 5, 1-1-1, Higashi, Tsukuba-shi, Ibaraki, 305-8565, Japan, Koichi Iwakabe, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST), Energy-Efficient Chemical Systems Group, AIST Tsukuba Central 5, 1-1-1, Higashi, Tsukuba-shi, Ibaraki, 305-8565, Japan and Keigo Matsuda, Department of Chemistry and Chemical Engineering, Graduate School of Science and Engineering, Yamagata University, 4-3-16, Jonan, Yonezawa, Yamagata, 992-8510, Japan |
Fifty Years of Fri Contributions to Separation Science
Mike Resetarits and D.W. King, Fractionation Research, Inc., P.O. Box 2108, Stillwater, OK 74076 |
Compressor-Free Heat Integrated Distillation Column System for Dehydration of Fermented Mash In Production of Fuel Bio-Ethanol
Kunio Kataoka1, Hiroshi Yamaji2, Hideo Noda3, Tadahiro Mukaida4, Mampei Kaneda4 and Masaru Nakaiwa5, (1)R&D Research Center, Kansai Chemical Engineering Co., Ltd, 2-9-7, Minaminanamatsu-cho, Amagasaki, 660-0053, Japan, (2)Kansai Chemical Engineering Co., Ltd, (3)Administration, Kansai Chemical Engineering Co., Ltd, 2-9-7, Minaminanamatsu-cho, Amagasaki, 660-0053, Japan, (4)Engineering, Kansai Chemical Engineering Co., Ltd, 2-9-7, Minaminanamatsu-cho, Amagasaki, 660-0053, Japan, (5)National Institute of Advanced Industrial Science and Technology, Central 5, 1-1-1, Higashi, Tsukuba, 305-8565, Japan |
The Effect of Outlet Weir Height on Sieve Tray Performance
A. Shariat and Tony Cai, Fractionation Research, Inc., P.O. Box 2108, Stillwater, OK 74076 |
Analysis of Operation Results of the Internally Heat Integrated Distillation Column (HIDiC) Pilot Pant In Japan
Koichi Iwakabe1, Kinpei Horiuchi2, Keigo Matsuda3, Toshinari Nakanishi4, Masahiro Ikeda5, Satoshi Taniguchi1, Takuji Yamamoto1, Sho Kataoka1, Takao Ohmori1 and Masaru Nakaiwa6, (1)Energy-Efficient Chemical Systems Group, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST), AIST Tsukuba Central 5, 1-1-1, Higashi, Tsukuba-shi, Ibaraki, 305-8565, Japan, (2)Japan Society for Safety Engineering, List Kannai Bldg. 3F, 4-47, Onoecho, Nakaku, Yokohama, Kanagawa, 231-0015, Japan, (3)Department of Chemistry and Chemical Engineering, Graduate School of Science and Engineering, Yamagata University, 4-3-16, Jonan, Yonezawa, Yamagata, 992-8510, Japan, (4)R&D Department, Kimura Chemical Plants Co. Ltd., 2-1-2, Kuiseterajima, Amagasaki,, Hyogo, 660-8567, Japan, (5)Institute of Industrial Science, The University of Tokyo, 4-6-1, Komaba, Meguro-ku, Tokyo, 153-8505, Japan, (6)Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology, AIST Tsukuba Central 5, 1-1-1, Higashi, Tsukuba-shi, Ibaraki, 305-8565, Japan |
Solvent Recovery by a New Batch or Semi-Batch Rectifying Still Unit
Hideo Noda1, Kunio Kataoka2, Hiroshi Yamaji3, Mampei Kaneda4 and Tadahiro Mukaida4, (1)Administration, Kansai Chemical Engineering Co., Ltd, 2-9-7, Minaminanamatsu-cho, Amagasaki, 660-0053, Japan, (2)R&D Research Center, Kansai Chemical Engineering Co., Ltd, 2-9-7, Minaminanamatsu-cho, Amagasaki, 660-0053, Japan, (3)Kansai Chemical Engineering Co., Ltd, 2-9-7, Minaminanamatsu-cho, Amagasaki, 660-0053, Japan, (4)Engineering, Kansai Chemical Engineering Co., Ltd, 2-9-7, Minaminanamatsu-cho, Amagasaki, 660-0053, Japan |
Evaluation of Economical and Environmental Performance for An Internally Heat-Integrated Distillation Column (HIDiC)
Keigo Matsuda, Department of Chemistry and Chemical Engineering, Graduate School of Science and Engineering, Yamagata University, 4-3-16, Jonan, Yonezawa, Yamagata, 992-8510, Japan, Kinpei Horiuchi, Japan Society for Safety Engineering, List Kannai Bldg. 3F, 4-47, Onoecho, Nakaku, Yokohama, Kanagawa, 231-0015, Japan, Koichi Iwakabe, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST), Energy-Efficient Chemical Systems Group, AIST Tsukuba Central 5, 1-1-1, Higashi, Tsukuba-shi, Ibaraki, 305-8565, Japan, Toshinari Nakanishi, R&D Department, Kimura Chemical Plants Co. Ltd., 2-1-2, Kuiseterajima, Amagasaki,, Hyogo, 660-8567, Japan and Masaru Nakaiwa, Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology, AIST Tsukuba Central 5, 1-1-1, Higashi, Tsukuba-shi, Ibaraki, 305-8565, Japan |
Basic Design of a Double-Pipe Unit Type Internally Heat Integrated Distillation Column (HIDiC)
Toshinari Nakanishi1, Naoaki Adachi1, Noriyuki Nishida1, Koichi Iwakabe2, Kinpei Horiuchi3 and Masaru Nakaiwa4, (1)Kimura Chemical Plants Co. Ltd., 2-1-2, Terajima Kuise, Amagasaki,, Hyogo, 660-8567, Japan, (2)Research Institute for Innovation in Sustainable Chemistry, National Institute of Advanced Industrial Science and Technology (AIST), Energy-Efficient Chemical Systems Group, AIST Tsukuba Central 5, 1-1-1, Higashi, Tsukuba-shi, Ibaraki, 305-8565, Japan, (3)Japan Society for Safety Engineering, List Kannai Bldg. 3F, 4-47, Onoecho, Nakaku, Yokohama, Kanagawa, 231-0015, Japan, (4)National Institute of Advanced Industrial Science and Technology, Central 5, 1-1-1, Higashi, Tsukuba, 305-8565, Japan |
|